Home
>
Mitel
>
Communications System
>
Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual
Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual
Here you can view all the pages of manual Mitel SX 200 DIGITAL Pabx Superset 3 Telephone Description Manual. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 291
Modem interconnect Panel CONTENTSPAGE 1. INTRODUCTION General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Reason for Issue . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . 1 2. MODEM INTERCONNECT PANEL General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LIST OF TABLES 2-lModem...
Page 292
SECTION MITL9141-753-528-NA iv
Page 293
Modem Interconnect Panel 1. INTRODUCTIONGeneral 1 .OlThis Section describes the MITEL Modem Interconnect Panel, part number 9141-940-100-NA. THE MITEL Modem Interconnect Panel is designed and approved only for installation in the Mite1DATACABINET 9000. Reason for Issue 1.02This Section is issued to describe the Modem Interconnect Panel. Page 1
Page 294
SECTION MITL9141-753-528-NAPage 2
Page 295
Modem Interconnect Panel 2. MODEM INTERCONNECT PANEL General2.01The Modem Interconnect Panel provides a method to connect a voice tip-ring pair from the PABX to a modem, and to connect the MI/MIC leads from the data set to the modem. Sixteen circuits are provided; each is the same, except for the tip-ring connection to the 25-pair cable. Figure 2-1 shows the connections to a Modem Inter- connect Panel. Connections 2.02The Teledapt jacks (FROM MODEM and TO DATASET) are con- nected together in pairs (pin...
Page 296
SECTION MITL9141-753-528-NA 3C KA0346ElROFigure 2-l Modem Interconnect Panel Connectors Page 4
Page 297
Modem Interconnect Panel CHART 2-l INSTALL A MODEM INTERCONNECT PANEL INTO A DATACABINET 9000 CAUTION: Only MITEL designed and approved equipment may installed within a DATACABINET 9000. StepAction 1.Unpack and inspect the Modem Interconnect Panel for damage or missing items. 2.Turn off the power switch and remove the line cord from its outlet. Open the doors of the cabinet. 3. 4. 5.install the cardfile rails for the Modem Interconnect Panel immediately above an existing DATASHELF 9100 or Modem...
Page 298
CABINET ---e---vSIDE RAIL CARDFILE RAILIFAN UNIT SECTION MITL9141-753-528-NA KAO601 EOR0Figure 2-2 Installation of Cardfile Rail Page 6