Minolta magicolor 2200 User Manual

Replacing the Transfer Belt 31
9Rotate the transfer belt lock lever.
10Reinstall the OPC drum cartridge.
Downloaded From ManualsPrinter.com Manuals 

Replacing the Transfer Belt 32
11Close the transfer belt lock lever.
12Check to make sure the laser lens cover is 
firmly seated.
13Reinstall the waste toner pack.
14Close the front cover and turn on the printer.
1
2
Downloaded From ManualsPrinter.com Manuals 

2
Using Media
 
Downloaded From ManualsPrinter.com Manuals 

Introduction 34
Introduction
This chapter provides information on handling, selecting, and storing media. Refer to the 
Maintenance Guide
 for media specifications.
Media Handling
Before purchasing a large quantity or special media, do a trial printing with the same 
media and check print quality. Check with our web site www.minolta-qms.com for a list of 
current approved media.
Attention
Do not use the media types listed below. These could cause poor print quality, media 
jams, or damage to the...

Media Types 35
„Metal clasps, fasteners, transparent windows, peel-off strips for sealing
„Material that will melt, vaporize, offset discolor, or emit dangerous fumes 
Do not use labels that have
„Label(s) already peeled off 
„Labels that peel off easily
„Glue or sealer that might come off
„Material that will melt, vaporize, offset discolor, or emit dangerous fumes
Media Types
Plain Paper 
Formatting
Format data within your application. 
Input Upper and 
Optional Trays500 sheets of 20 lb bond (75 g/m²)...

Media Types 36
Letterhead and Memo Media 
Thick Stock
Formatting
Format letterhead or memo data within your application. Try printing your data on 
a plain sheet of paper first to check placement. 
Input Upper and
Optional TraysUp to 500 sheets
Multipurpose 
Tra yUp to 150 sheets
Orientation Upper and 
Optional TraysFace up—top of page toward the right
Multipurpose 
Tra yFace down—top of page toward the printer side
Ty p e
Any standard or recycled office paper suitable for plain-paper laser printers,...

Media Types 37
Envelopes 
Ty p e
For information about thick stock media recommended for your printer, go to 
www.minolta-qms.com/support, then click on Answer Base, or contact Technical 
Support. See the 
Service & Support Guide for a complete listing of support 
telephone numbers.
Weight
Simplex: 24–43 lb bond (90–163 g/m²)
Autoduplex: Up to 28 lb bond (105 g/m²) 
Manual Duplex: 24 lb (90 g/m²) to 43 lb (163 g/m²) bond 
Duplexing
Autoduplexing thick stock over 28 lbs (105 g/m²) is not supported....

Media Types 38
Labels
Postcards 
Formatting
Format label data within your application. Try printing your data on a plain sheet 
of paper first to check placement. 
Input Multipurpose 
Tray OnlyUp to 50 sheets, depending on the thickness of the labels
Orientation
Face down
Ty p e
Use only labels recommended for laser printers, such as
„
Avery 5260
Weight
16–90 lb (60–163 g/m²) 
Duplexing
Not supported
Notes
„Avoid using labels with exposed adhesive; it may stick to the transfer belt or 
the fuser roller,...

Media Types 39
Transparencies 
Notes
If the postcard is warped, press on the warped area before 
putting in multipurpose tray.
Formatting
Format the information to be printed on the transparencies within your 
application. Try printing your data on a plain sheet of paper first to check 
placement. 
Input Location
Upper and Optional Trays 
Multipurpose tray 
Capacity
Up to 50 sheets, depending on the thickness of the 
transparencies
If you have problems feeding 50 sheets, try loading only 5–10 
sheets at...

Loading Media 40
Loading Media 
Take off the top and bottom sheets of a ream of 
paper. Holding a stack of approximately 250 
sheets at a time, fan the stack to prevent static 
buildup for the paper before inserting it in a tray. 
5Do not fan transparency media.
Attention
Always load the media short edge first. 
Attention
Do not mix media of different sizes, types, or weights, as this will cause 
printer jamming.
„When refilling media, first remove any media remaining in the tray. Stack it with the 
new...