Midway Kart Fury 27in Operations Manual

C.A.R.T. FURY7
CHAPTER 3 SERVICE
DASHBOARD SERVICE
To service the Dash Panel Insert … 
Refer to the Dashboard Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the Dashboard. Refer to service instructions for Dashboard.
Remove 4 tamper resistant screws used to fasten the cover to the molded dash and set aside.
Lift the plastic cover plate off of the PCB and dash.  
Perform the desired repair or equipment replacement. NOTE: It may also be necessary to...

8MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
DASH PCB SERVICE
To service Shifter…
Refer to the General Dashboard Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the Control Cabinet and the Dashboard. Refer to service instructions for Control Cabinet and 
Dashboard.
Remove the tamper resistant screws used to fasten the molded plastic cover on the control cabinet. Lift 
the cover off of the cabinet and set aside.
Label and disconnect all wiring....

C.A.R.T. FURY9
CHAPTER 3 SERVICE
GENERAL DASHBOARD SERVICE
To service Steering Assembly…
Refer to the General Dashboard Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the Dashboard. Refer to service instructions for Dashboard. 
Remove 6 screws used to fasten the cover plate to the center of the steering wheel. Remove the cover 
plate and set aside. 
Remove the 3 screws used to fasten the wheel hoop to the shaft. Pull the wheel hoop off of the...

10 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
STEERING WHEEL HOOP SERVICE
To service Boost Buttons on the Steering Wheel Hoop…
Refer to the Steering Wheel Hoop Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the screws used to fasten the wheel hoop cap to the steering wheel. Lift of the hoop cap off and 
set it aside with the hardware for reuse later.  
Lift out the steering wheel spacers. 
Gently pull the steering wheel forward enough to expose...

C.A.R.T. FURY11
CHAPTER 3 SERVICE
To service Pedal Assembly… 
Switch off the power to the game machine and unplug the AC line cord.
Adjust the seat to the maximum rear position.
Remove 4 tamper resistant screws used to fasten the Pedal assembly to the cabinet. NOTE: 
Due to the 
weight of the pedal assembly it may slide or abruptly jerk out of the opening once all screws are loos-
ened and/or removed.
Pull the assembly forward enough to expose wiring.
Carefully note the orientation of the cable...

12 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
To service Dollar Bill Validator…
(Use MARS AE2411-U3 UL recognized currency changer)
Dollar bill validators or other currency acceptors may be installed in games that are manufactured with the 
additional wiring connector. 
Switch off the power to the game machine and unplug the AC line cord. 
Unlock the coin door and swing it open. Read the label affixed to the door for additional information. 
Disassemble the validator and remove material to permit...

C.A.R.T. FURY13
CHAPTER 3 SERVICE
To service the Battery… 
Switch off the power to the game machine and unplug the AC line cord.
Unlock and remove the rear door.  
Remove the screws used to fasten the hinged, metal cage covering the PCB Assembly.  
Open the cage, which is hinged along the bottom edge, to expose the PCB assembly.
Locate the battery on the Vegas SIO Board assembly, and then remove using a chip extraction tool.
To install a battery, orient a battery over the corresponding socket and...

14 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
To service Fan Assembly…
Switch off the power to the game machine and unplug the AC line cord.
Unlock and remove the rear door. 
Remove the perforated metal cover to expose the fan assembly and set aside. 
Unplug the fan power connector from the wiring. 
Remove the screws used to fasten a fan down and then lift fan out. 
Perform the desired repair or equipment replacement. 
To service Speakers in Head Rest…
Refer to the Seat Pedestal Service...

C.A.R.T. FURY15
CHAPTER 3 SERVICE
SEAT PEDESTAL SERVICE 

16 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
To service the Seat Assembly… 
The Seat Assembly includes the pedestal base. 
Refer to the Seat Pedestal Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Disconnect the Seat Assembly from the cabinet by removing 8 tamper resistant screws used to fasten 
the assembly to the slide rails in the cabinet.
Slide the Seat Assembly halfway back along the rails to expose wiring. 
Disconnect the speaker cable and slide...