Midway Kart Fury 27in Operations Manual

C.A.R.T. FURY TROUBLESHOOTING - 3
START UP TROUBLESHOOTING 
Symptom Cause Required Action
Video Game Machine 
(VGM) does not start.
VGM appears com-
pletely non-functional.
No audio
No illumination
No video displayPower problem 1. Check power is switched on.
2. Make sure fans are turning. If not: Is the power
supply connected to its power cable? Is power
supply turned on?
3. Plug cord into AC power outlet. Verify presence of
AC line voltage.
Improper line volt-
age switch setting1. Turn off power....

TROUBLESHOOTING - 4 MIDWAY AMUSEMENT GAMES, LLC 
Video Game Machine 
(VGM) does not start.
VGM accepts cur-
rency or tokens.
Audio and video are 
present.Faulty wiring 1. Assure no wires are caught in hinges, latches or 
switch contacts.
2. Check wiring continuity from circuit board connec-
tors to acceptors.
Video Game Machine 
(VGM) appears non-
functional.
Currency acceptor 
price indicator is illumi-
nated.Power problem 1. Inspect circuit boards under low-light conditions. 
The LED’s glow and...

C.A.R.T. FURY TROUBLESHOOTING - 5
LINKING PROBLEM TROUBLESHOOTING 
Symptom Cause Required Action
Cannot connect multi-
ple Video Game 
Machines (VGMs)  
togetherFaulty wiring  1. Do not extend linking cables supplied with VGM.
2. Install required crossover between cabinets. Each
coupler connects two VGMs (one pair). Do not use
standard telephone type couplers or wiring for link-
ing.
3. Use only 10 Base-T, Ethernet-type, Category 5,
twisted-pair wiring. 
Improper linking 
hardware1. Use required network...

TROUBLESHOOTING - 6 MIDWAY AMUSEMENT GAMES, LLC 
LINKING PROBLEM TROUBLESHOOTING 
Symptom Cause Required Action
Some Video Game 
Machines (VGMs) in 
group link properly, 
while others do notImproper hub 
switch setting1. Assure switches on hub are set according to Hub 
Link Kit instructions. (VGMs on a network do not 
require couplers. Hub has electronic crossover.)
2. Inspect hub indicator lights for link activity. See
manufacturer’s literature for diagnostics.
Wrong software 
versionVerify all linked...

C.A.R.T. FURY TROUBLESHOOTING - 7
PLAYER CONTROL TROUBLESHOOTING
Symptom Cause Required Action
Intermittent or com-
pletely non-functional 
player controls
Video Game Machine 
(VGM) starts normally.Faulty switches or 
lamps1. Press and hold TEST MODE switch inside coin 
door to enter Menu System. Select SWITCH 
TEST from Diagnostic Menu. Conduct tests to 
confirm switch operation.
2. Press and hold TEST MODE switch inside coin
door to enter Menu System. Select LAMP TEST
from Diagnostic Menu. Conduct...

TROUBLESHOOTING - 8 MIDWAY AMUSEMENT GAMES, LLC 
Sloppy, unpredictable 
or ineffective steering
Video is present
Video Game Machine 
(VGM) operates nor-
mallyBlocked or faulty 
fanFan located on power supply functions as an exhaust 
fan. With power on, check airflow near each fan to 
assure that nothing blocks airflow. 
Faulty mechani-
cal partsTurn off power. Open dashboard. Support steering 
wheel and remove outer mounting screws. Remove 
metal shield (if VGM has one) over motor. Inspect for 
faulty...

C.A.R.T. FURY TROUBLESHOOTING - 9
VIDEO TROUBLESHOOTING
Symptom Cause Required Action
Monitor appears non-
functional
Audio is present
Video Game Machine 
(VGM) controls oper-
ate normallyPower problem
Verify connection of AC Power to video monitor. Inspect 
neck of CRT in dim light. Glowing filament near CRT base 
confirms monitor circuits receive power. However, voltages 
or signals may not be normal
. 
Faulty wiring 1. Turn off game power. Verify that video signal and 
Remote Adjustment Board...

TROUBLESHOOTING - 10 MIDWAY AMUSEMENT GAMES, LLC 
Power Problems 1. Turn on Power. Use 20-volt DC setting on digital 
voltmeter to measure DC voltages present at 
Power connector pins. Verify +5V source if it is 
adjustable. Refer to Cabinet Wiring Diagram for 
specific wiring information and voltage limits.
2. Use 2-Volt AC setting on digital voltmeter to mea-
sure DC voltages at Power Connector pins. Any
reading indicates the supply voltages are unstable
and may contain ripple or noise.
White areas at...

C.A.R.T. FURY TROUBLESHOOTING - 11
Picture is too narrowMaladjusted WIDTH 
pot
.From Diagnostic Menu select MONITOR TEST. Watch 
Crosshatch Screen while adjusting WIDTH pot for best 
picture. You’ll find this pot on Monitor Remote Control 
Board, behind coin door.
Picture is too short Maladjusted 
HEIGHT pot or 
damaged vertical 
circuit1. From Diagnostic Menu select MONITOR TEST. 
Watch Crosshatch Screen while adjusting 
HEIGHT pot for best picture. You’ll find this pot on 
Monitor Remote Control...

TROUBLESHOOTING - 12 MIDWAY AMUSEMENT GAMES, LLC 
TYPICAL CUTAWAY REAR VIEW
CAUTION 
Do not remove or install any connector when power is turned on. Installation under power will 
damage the circuit boards or ROM’s and void the warranty.
WARNING: HIGH VOLTAGE. 
Video Game Machine (VGM) monitors 
generate and store potentially lethal high voltages. 
Avoid touching any part of the monitor until power has been off for some time. A picture tube 
can maintain a hazardous charge for up to several days. Only...