Midway Kart Fury 27in Operations Manual

C.A.R.T. FURY5
CHAPTER 1 OPERATION
VIDEO GAME MACHINE ARRAY 
SET-UP
1. Remove all items from the shipping containers and set them aside. Remove all packing material.
Inspect the exterior of the main cabinet, control cabinet and the seat pedestal for any damage.
2. Remove the keys from the steering wheel. Unlock and open the rear door, and the coin and cash
boxes. Electrical cords, mechanical components, and assorted spare parts are packed inside the cash
box.
3. Install one nut onto each leg leveler....

6MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 1 OPERATION
LOCATION OF CASTERS AND LEVELERS
5. The pedestal assembly mounting rails are shipped bolted to the inside of the control cabinet. Remove
all of the ¼ -20 hex-head bolts used to fasten the rails inside the cabinet and set aside. Individually pull
each rail out of the cabinet, flip it end for end, and reinsert it. See diagram for proper placement. Fas-
ten the rail to the inside of the control cabinet with the bolts until finger tight. Do not tighten these...

C.A.R.T. FURY7
CHAPTER 1 OPERATION
6. Roll the pedestal section near the cabinet, align the opening in the pedestal with the ends of the rails.
Slide the pedestal forward onto extended mounting rails leaving enough space to attach the wiring har-
ness. Mate each cable connector and press firmly to seat the contacts. Ensure no wires are pinched
during pedestal attachment. Attach pedestal assembly using 1/4-20 tamper resistant screws and large
flat washers provided in spare parts. A T27 wrench is included...

8MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 1 OPERATION
11. The power cord is packed in with the spare parts. Insert a portion of the line cord in the cord clamp
leaving enough slack for the cord. Match the holes on the IEC plug with the prongs in the receptacle
and push firmly to seat the line cord. 
12. Plug the game into a grounded (3-terminal) AC wall outlet. Switch on power to the game using the ON/
OFF switch located on the upper left top of the cabinet (when viewed from the player’s position). The
game...

C.A.R.T. FURY9
CHAPTER 1 OPERATION
Player Controls
Use plastic-safe, non-abrasive cleaners to avoid damage. Apply cleaner to a clean cloth or sponge and
wipe the player controls. Do not apply the cleaner directly on the controls!
Cabinet and Seat
Use plastic-safe, non-abrasive cleaners to avoid damage. Apply cleaner to a clean cloth or sponge and
wipe the seat or cabinet. Do not apply cleaner directly on artwork or cabinet!
GAME FEATURES
C.A.R.T. Fury: Championship Racing™ ships configured for...

10 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 1 OPERATION

View 3 Button 
shows an aerial view of the vehicle. This is what a helicopter camera would see.
Pedals, for both gas and brakes, are used to control vehicle speed.    
Seat Position Adjuster may be changed at any time, even during competition. Pull the adjustment lever
to the left while seated then slide the seat forward or backward. Release the lever to lock the seat into
position. 
GAME OPERATION
Access to the menu system for statistics,...

CHAPTER TWO
C.A.R.T. FURY 
ADJUSTMENT, DIAGNOSTIC & AUDIT MENUS 

2MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
ADJUSTMENT, DIAGNOSTIC & AUDIT MENUS
MENU SYSTEM 
WHAT IS THE MENU SYSTEM?
The game’s Menu System is a series of auditing, game adjustments and diagnostic screens. You can eas-
ily access and apply these screens to optimize game performance. For instance…
 Use game audit screens to assess game performance.
 Use adjustment screens to help you customize game performance. For example, you can restore factory
default game settings. You can also calibrate...

C.A.R.T. FURY3
CHAPTER 2 DIAGNOSTICS
DIAGNOSTIC MENU
To verify the condition of the electrical and electronic hardware in the game, select Diagnostics Menu at 
the Main Menu. Diagnostic tests assist you in checking and adjusting the game’s major systems. It is 
important to periodically run diagnostics to improve and maintain game performance and player satisfac-
tion. 
Use the Volume Up or Volume Down button to highlight the desired Diagnostic Menu option and press the 
Test button to enter. 
MONITOR...

4MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
COLOR BARS.
 Observe 4 color bars in different shades appear on-screen as aids in adjusting the green,
blue, and red color levels. Each color should appear sharp and clear. Check video brightness and contrast.
The CROSSHATCH PATTERNS
 test fills the screen with a series of dots within a grid. Observe the dots
are perfectly round and that both the grid and dots are clear. Inspect monitor convergence, linearity, and
screen size.
The single color screens,...