Midway Kart Fury 27in Operations Manual

C.A.R.T. FURY25
CHAPTER 2 DIAGNOSTICS
FULL FACTORY RESTORE 
This allows the operator to restore all settings to the way they were when the game left the factory. The 
setting range is:
-Enable
-Disable
-Factory Setting:     Disable
VOLUME LEVEL
To select a desirable volume level, select Volume Level at the Main Menu. 
Press the Volume Up or Volume Down button to highlight the Adjust Volume option on the Main Menu, then 
press the Test button. Remember that the minimum sound level is set under Game...

26 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
UTILITIES
To clear bookkeeping memory and reset factory defaults, select Utilities at the Main Menu. Press the Vol-
ume Up or Volume Down button to highlight the Utilities option on the Main Menu, then press the Test but-
ton. 
UTILITIES MENU
The Utilities Menu offers several options. Press the Volume Up or Volume Down button to highlight an
option, then press the Test button. Each time an option on the menu is activated you are provided with mul-...

C.A.R.T. FURY27
CHAPTER 2 DIAGNOSTICS
CLEAR CREDITS
Press the Volume Up or Volume Down buttons to highlight the Clear Credits option on the Main Menu, then 
press the Test button. This returns all credit values to zero and removes credit amounts from memory.
- Yes
- No
- Factory Setting: No
CLEAR AUDITS
This select from a menu of assorted audit values that can be returned to zero and remove total from mem-
ory, Press the Volume Up or Volume Down buttons to highlight the Clear Audits option, then press...

28 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
RESET HIGH SCORES
Press the Volume Up or Volume Down buttons to highlight the Reset High Scores option on the Main 
Menu, then press the Test button. This deletes all high scores and removes player identities from memory.
- Yes
- No
- Factory Setting: No
DEFAULT ADJUSTMENTS
Press the Volume Up or Volume Down buttons to highlight the Default Adjustments option on the Main 
Menu, then press the Test button. This sets the adjustments back to their...

CHAPTER THREE
C.A.R.T. FURY 
SERVICE 

2MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
SAFETY INSTRUCTIONS
The following safety instructions apply to operators and service personnel.  Read these instructions
before servicing or preparing the Video Game Machine (VGM) for play.  Other safety instructions appear
throughout this manual.
DEFINITIONS OF SAFETY TERMS
•
DANGER indicates an imminent hazard.  If you fail to avoid this hazard, it WILL cause death or serious 
injury.

WARNING indicates a potential hazard.  If you fail to avoid this...

C.A.R.T. FURY3
CHAPTER 3 SERVICE
CAUTION: USE CARE WHEN SHIPPING HARD DISKS.  
The hard disk drive must be packed in an anti-static bag.  When shipping the drive for
repair or replacement, pack it in an approved container (P/N 08-8068).  Do not stack or
drop hard disk drives.
WARNING: HAZARD TO EPILEPTICS.  
A very small portion of the population has a condition which may cause them to experi-
ence epileptic seizures or have momentary loss of consciousness when viewing certain
kinds of flashing lights or...

4MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
SERVICING
Only qualified service personnel should perform maintenance and repairs. The product guidelines apply to
all operators and service personnel. Specific notes, cautions, and warnings appear throughout the manual
where they apply. We recommend that you read the SAFETY NOTICES section thoroughly before begin-
ning service. 
NOTE: Always switch off power to the game machine before servicing.
To service the Marquee… 
Refer to Marquee Service...

C.A.R.T. FURY5
CHAPTER 3 SERVICE
To service the Fluorescent Lamp or Starter… 
Refer to Marquee Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Lift open the Marquee Housing. Refer to service instructions for Marquee.
Reach up inside the opening in the cabinet and remove the fluorescent lamp locks.  
Both the fluorescent tube and the starter require a quarter turn for removal. Grasp the tube or starter, 
give it a quarter turn and pull it from its socket....

6MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
To service Viewing Glass… 
Refer to Viewing Glass and Bezel Service illustration.  
Switch off the power to the game machine and unplug the AC line cord.
Remove the dashboard. Refer to service instructions for Dashboard.
Gently slide the viewing glass up and lift it out of the cabinet. Set the viewing glass aside.
Perform the desired repair or equipment replacement.
Clean both the bezel and the viewing glass before reinstallation.
To service Monitor...