Metz Clarus 32 Ml Operating Instructions

71
25. Registering AV Devices
Data Logic
Opening the menu
• Press numeric key , use the - +key to select
the correct signal types (OUT/IN) and press the
OK key.
(See also the operating instructions of the 
AV device.)
• If desired, press numeric key 
, enter a new
name for the AV device and press the OK key.
• Use the cursor control key to select  Data
Logic and press the OK key.
• Use the cursor control key to select Connect
and press the OK key. Then connect the AV
device to the corresponding EURO...

72
The signal type always refers to the input
and output of the AV device.
Some AV devices may use a composite video sig-
nal (FBAS) for recording and playback operations
and an RGB signal for displaying their menus.
It is not possible to make a general statement in
this respect. The operating instructions of the AV
device concerned may provide some indication.
If you connect such an AV device with the signal
type composite video (FBAS) and recordings are
played back correctly, but you cannot see the...

73
25. Registering AV Devices
Setting signal types DVI/HDMI
The signal type always refers to the input
and output of the AV device.
AV devices equipped with a DVI or HDMI socket
can be connected to the LCD TV with the aid of a
DVI or HDMI cable, respectively. The connected
device must be registered in the menu AV devi-
ces with Signal OUT set to DVI or HDMI,
as applicable. Connection via a DVI or HDMI
interface permits digital transfer of the picture sig-
nal from the device to the TV set. Bei When...

74
Connection of external devices with YUV compo-
nent output to the COMPONENT IN RCA jacks.
The signal type always refers to the input
and output of the AV device.
AV devices equipped with a YUV jack can be con-
nected to the LCD TV by means of a YUV cable
(see page 86). In the AV Devices menu, the con-
nected AV device must be registered with signal
OUT YUV. 
Setting the YUV Signal Type
- Enter the TV menu by pressing MENU.
- Press the yellow key to open the AV Devices
menu.
- Use the cursor control to...

75
25.1 Removing AV DevicesOpening the menu
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
This menu item is not available in a 2 **
menu.
If desired, you can change the factory settings for
AV devices (a video recorder on the EURO1
socket and a DVD player on the EURO2 socket).
Removing an A
V device from the TV set
• Press the MENU key to...

76
You can define an initial programme position in
this TV set. This initial programme position is used
primarily to select the AV programme position if
you use an external receiver.
Setting the initial programme position
This menu item is not available in a 2 **
menu.
Select a receiver (satellite or set-top box) in the
menu AV devices and connect the receiver to the
TV set (see also Section 25,
Registering AV Devices).
• Press the AV key.
• Use the numeric keys to
select the position Sat/Set-
top in the...

77
MENU
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
27. Sound via HiFi Amplifier
HiFi output
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
86) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
Settings need to be made in the menu items HiFi
output and Sound...

78
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
81) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
If you wish to play back the sound only via a HiFi
system (HiFi amplifier) which is connected with the
aid of a Cinch cable, you must select the function
Sound via HiFi.
If you wish to play back the sound only via a HiFi
system (HiFi amplifier) which is connected with the
aid of an optical audio cable (Toslink, available
as an...

79
Opening the menu28. DVB Radio Mode
For DVB radio operation, the TV set must
be converted with a DVB-S or DVB-C modu-
le (see also chapter 39.1 Upgrade Options).
To switch from TV mode to DVB radio mode, press
the R key.
The screen is automatically blanked after about
30 seconds.
To switch from DVB radio mode to TV mode, press
the TV key.
Setting DVB radio stations
The available DVB radio stations are automatical-
ly detected during a station search (see Section
22) and stored in a separate station...

80
29. Scope of Operation
The adjustable scope of operation for the TV set
can be a great help in finding your way around
the complex operating functions of the TV set.
The scope of operation can be set to various
levels, which are identified by asterisks.
1 & & &
Just watching TV- in other words, it is
not possible to open the TV menu and
only the functions available on the
remote control can be used:
- Zapping
- Selection of programme positions with the nume-
ric keys, the oval P+/P- rocker key or the...