Metz Clarus 32 Ml Operating Instructions

41
17. Special Functions
Normal/SpeechOpening the menu
Opening the menu
Selection of Normal or Speech is des-
cribed in Section 12.1, Tone Settings.
In this menu, you can temporarily select
Normal or Speech. The selection
remains active until you switch to another
programme position, switch to standby
mode or switch the TV set off completely.
This setting has no effect of the setting
described in Section 12.1, Tone Set-
tings.Special functions 2
1Normal/Speech
9Timer-Over view
0Direct recording
F2
If you...

42
Record. The number of subjects and sections
depends on the selected scope of operation.
Depending on the configuration of the TV set,
the various menu items may be displayed in a
different order and numbered differently.
Use the 
-+
key to set this menu item to Yes.
• If desired, press cursor control key 
and use the - +key to activate the
reminder function. If the reminder
function is active, a reminder window
is displayed on the screen one minute
before the start time programmed for
the timer.
•...

43
17. Special Functions
Direct recording of a programmeOpening the menu
If you wish to record the programme you are cur-
rently watching, you can start a direct (one-touch)
recording to make the current programme availa-
ble to a recording device connected to the EURO
sockets.
Star
ting a direct recording:
• Press the F2key.
If you press F2briefly, the function programmed
for F2 (see Section 18., Programming the Func-
tion keys) is executed.
If you hold down F2for about two seconds, all
possible...

44
Adjusting the picture format:
• Press the F3key.
If you press F3briefly, the function programmed
for F3 (see Section 18., Programming the Func-
tion keys) is executed.
If you hold down F3for about two
seconds, all possible selections are dis-
played.
• Press numeric key 
to select the 
function Picture format menu.
• Use the P+/P- rocker key to select the
desired function. After selection of a
picture format, you can also adjust the
zoom setting by pressing the 
-+
key
within five seconds.
• The...

45
17. Special Functions
Picture format
Opening the menu
Panorama
With the aid of the panorama function, you can
expand programmes broadcast in 4:3
format to fill the screen of a 16:9 TV set.
The picture is expanded uniformly in the
horizontal direction. You can also zoom
the picture. The panorama function can
be activated and deactivated in the menu
item General picture settings of the
menu Picture and sound. 
16:9 Full picture
This function serves to display pictures
from external devices (such as a...

46
If desired, the picture can be shifted up or down in
order, for example, to make subtitles visible or to
hide ticker displays.
Adjusting the picture position:
• Press the F3key.
If you press F3briefly, the function programmed
for F3 (see Section 18., Programming
the Function keys) is executed.
• Press numeric key 
to select the 
function Picture position vertical.
• You can now use the 
-+
key to move
the picture up and down on the screen
so that, for example, the station logo or
the subtitles are...

47
The remote control has four function keys: F1, F2,
F3 and AV. You can programme these function
keys with any of the available functions.
If you press and hold any function key, a
window with the available functions is dis-
played. The picture on the left shows the
functions available for the F2 key.
Programming function key F1, F2, F3 or
AV with a function
• Press the MENU key to open the TV
menu.
• Press the red key  to open the Confi-
guration menu.
• Press and hold the F1key to display the availa-...

48
In the menu Sound settings, you can activate a
two-stage mute function. When this function is
active, the volume in TV mode can be reduced in
two stages with the mute key  .
Activating the mute function
• Press the MENU key to open the TV menu.
• Press the red key  to open the Configura-
tion menu.
• Press the OK key to move to the right side of
the menu.
• Use the cursor control key 
or the corresponding nume-
ric key (in the example: (
)
to select the menu item
Sound settings.
• In the setting...

49
19.1 Data Logic Settings
Data Logic Mode 1 / Mode 2
Factory setting is Mode 1.
If the recording is stopped by the Data Logic
Videorecorder (self-dependent, 5-10sec. after the
start of the recording), switching to Mode 2could
solve this problem.
Opening the menu
MENU

OK
EXIT
OK
Data Logic     mode 2Data Logic adjustm.
EPG settings
Operating
Sound settings
HiFi output
2)
Init. prog.position
AV function
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-T
Analog-TV
Country
Language...

50EPG
20. EPG
EPG (Electronic Program Guide) is an electronic
TV guide covering all major channels. The guide
may be made up of details from NexTView
and/or DVB-SI. 
The NexTView information is broadcast by various
channels and also includes information for other
broadcasting organizations.
DVB-SI (Digital Video Broadcasting-Service Infor-
mation) is a service provided by different broad-
casters. Programme details are broadcast digitally
by each broadcaster exclusively for those pro-
grammes it offers....