Lucent Technologies Remote Port Security Device Users Guide

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-31 Command Functions 
3
I—ID Set
Syntax and Parameters
To set a log ID:
i  
To clear a log ID:
i 
Description
Use the ID Set command to set a unique identifier for the RPSD Lock. It is useful 
when more than one Lock is in operation. The Lock’s ID is added to the 
beginning of status messages to identify the Lock concerned.
Sample Command and Response
In the sample, the log ID is added to the...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-32 Command Functions 
3
LR—List Restrictions
 Syntax and Parameters
To list the time periods and days for time restrictions for all restriction IDs A to N:
lr 
To list the time period and day for time restriction for a specific restriction ID:
lr 
Description
Use the List Restrictions command to list the administered time periods and days 
during which time restrictions can be placed on one or...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-33 Command Functions 
3
Sample Command and Response
The fields of the List Restriction screen are:
Restriction IDA single character from A–N (14 possible restriction codes) 
used as a code to identify the specific time periods and 
days during which time restrictions can be placed on one or 
more users.
Start TimeThe time of day, in 24-hour clock format, when the restriction 
begins
End TimeThe...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-34 Command Functions 
3
LS—List Statistics
Syntax and Parameters
ls 
Description
Use the List Statistics command to display a statistical summary of call attempts 
and failures, both cumulative and since the last time the statistical summary was 
reset. Reset the summary by using the Reset Statistics command (see 
instructions on page 3-46).
Statistics are listed for administrative users,...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-35 Command Functions 
3
The fields of the List Statistics screen are:
Last ResetThe date that the statistics kept in the Since Last Reset field 
were reset to 0. Cumulative statistics are never reset to 0.
Successful 
Authenti-
cationsThe number of times that a caller was successfully 
authenticated by the Lock, both since the last time the 
statistics were reset and cumulatively since the Lock...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-36 Command Functions 
3
L—List User Table
Syntax and Parameters
To list information about all users:
l 
To list information about a specific user (full user ID) or for all users beginning 
with specific characters (partial user ID):
l  
Description
Use the List User Table command to list the user ID, whether the user is blocked 
or unblocked, the user type, and a code letter for any time...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-37 Command Functions 
3
Sample Command and Response 
For the following sample command and response screens, the fields of the List 
User Table screen are:
User IDUser ID
Blocked?Whether a Block command has been issued for that user. 
The default is no block. If a user is not blocked, the field is 
left blank. Blocks can be issued on permanent, 
administrative, and non-administrative users.
User...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-38 Command Functions 
3
Sample without specifying the [full_or_partial_user_id] parameter. Information 
is listed for all users (fields included on the screen are described above):
Sample with
 a specific user entered as the [full_or_partial_user_id] parameter. 
Information is listed for the specified user only (fields included on the screen are 
described on page 3-37):
User ID Blocked? User...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-39 Command Functions 
3
Sample with a partial user ID entered as the [full_or_partial_user_id] 
parameter. Information is listed for all users beginning with the characters 
entered (fields included on the screen are described on page 3-37):
> 1 KEY
User ID Blocked? User Type Restriction(s)
KEY11 R A
KEY12 B R C
KEY13 B R D
KEY14 AW A B
KEY15 AW D
KEY16 AK A
KEY17 AK A
KEY18 B R A
KEY19 R A 

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-40 Command Functions 
3
LH—Log History
Syntax and Parameters
lh [-] [ALL] 
Description
Use the Log History command to display the last 500 status messages in the 
System Activity Log. The System Activity Log retains a log history of status 
messages generated by the RPSD Lock. Status messages include a history 
(including date and time) of the following RPSD system activity:
nAny RPSD system...