Lucent Technologies Remote Port Security Device Users Guide

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-51 Command Functions 
3
U—Unblock User
Syntax and Parameters
u  
Description
The Unblock User command removes the block placed on an Key user’s access 
to the Lock. Both permanent and non-permanent users may be unblocked. To 
determine whether a user is blocked, or to check the user IDs, use the List User 
Table command (see instructions on page 3-34).
Sample Command and Response
Parameter...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-52 Command Functions 
3
UR—User Restrictions
Syntax and Parameters
To assign a time restriction:
ur  
To clear a time restriction:
ur ,clear
Description
Use the User Restrictions command to assign time restrictions to one or more 
users. The command assigns time restrictions identified by the restriction ID 
code to a specified user if the full user ID is given, or to all users beginning with...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-53 Command Functions 
3
Sample Command and Response
Sample with a specific user entered as the [full_or_partial_user_id] parameter. 
The time restrictions identified by the restriction code IDs (“A,” “B,” and “C” in the 
following example) are assigned for the specified user only:
Sample with
 a partial user ID entered as the [full_or_partial_user_id] 
parameter. The time restrictions identified...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
RPSD System Administration 
Page 3-54 Command Functions 
3
Help Screens
To obtain a help screen for any command, enter a question mark (?) followed by 
the command and press  .
Sample Help Request and Help Response
ENTER
> ?i
Command: I - ID Set
Function:Set ID to precede all log messages from this device.
Format: I log_id
Example: >I LOCK-A
To clear ID type:I ** 

Key Administration and Use 
Page 4-1  
4
Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
4
4Key Administration and Use
When the system is working correctly, Key use and authentication is almost 
invisible to the RPSD Key user. (Authentication is the process of identifying 
proper users via passwords or the PassKey procedure.) The caller dials the port 
being protected on the communications system from the caller’s terminal 
connected to the Key, authentication takes place...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Key Administration and Use 
Page 4-2 RPSD Key User Command Set 
4
RPSD Key User Command Set
The RPSD Key displays a different Menu of Commands depending on whether or 
not the device is initialized. The following is the Menu of Commands when the 
Key is uninitialized:
--- Menu of Commands ---
L - List User Information
H - History Display
D - Date Set
C - Clock Set
I - Set Log ID
S - Status Display
SC - Set Comms. Params
W - Wipe...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Key Administration and Use 
Page 4-3 Initialization Functions 
4
Initialization Functions
As the name suggests, initialization fuctions are those you use to set up an 
uninitialized Key. The commands are:
nU—Set User ID
nK—Set Secret Key
nN—Set Device Number
U—Set User ID
Syntax and Parameters
u 
Description
Use the Set User ID command to enter a name that will identify the RPSD Key to 
the RPSD Lock. Use this command only when...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Key Administration and Use 
Page 4-4 Initialization Functions 
4
K—Set Secret Key
Syntax and Parameters
K 
Description
Use the Set Secret Key command to enter the secret key information supplied by 
the RPSD Lock when a new user is added to the list of authorized users. Use this 
command only when initializing a previously uninitialized Key.
To use this command, enter K  . The response includes a 
Test Reply. The Test Reply...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Key Administration and Use 
Page 4-5 Initialization Functions 
4
N—Set Device Number
Syntax and Parameters
n 
Description
The Set Device Number command enters a number from 100 to 9999999 as an 
identifier for the RPSD Key. Use this command when you have two or more RPSD 
Keys with the same user ID. The device number is associated with the Key for the 
purpose of identification by the Lock. Use this command to initialize a...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Key Administration and Use 
Page 4-6 Command Functions 
4
Command Functions
Command functions are those commands listed in the Menu of Commands after 
the Key device has been initialized.The command functions are:
nA—Add Administrative User
nAS—AUX Security
nC—Clock Set
nD—Date Set
nH—History Display
nI—Set Log ID
nL—List User Information
nLA—List Administrative Users
nQ—Quit
nR—Remove Administrative User
nS—Status Display...