Lucent Technologies DEFINITY System Little Instructions Manual

DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Managing features 
55 Setting up bridged call appearances 
6. Complete the appropriate field for your phone type.
7. Press 
RETURN.
Btn and Ext fields appear. If Per Button Ring Control is set 
to 
y on the digital screen, Btn, Ext, and Ring fields appear.
Station screen (analog set)If. . . Then. . .
your primary phone 
is 
analog
move to the Line Appearance field 
and enter abrdg-appr
your primary phone...

Managing features 
56 Setting up bridged call appearances 
DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Station screen (digital set)
8.Enter the primary phone’s button number that you want to 
assign as the bridged call appearance.
This button flashes when a call arrives at the primary 
phone.
9. Enter the primary phone extension.
10. If the Ring field appears:
nIf you want the bridged appearance to ring when a 
call arrives at the primary phone,...

DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Routing outgoing calls 
57 World class routing 
Routing outgoing calls
This section describes how the DEFINITY routes outbound calls 
and how you can modify call routing. It also provides instructions 
for creating partitions and setting authorization codes. 
NOTE:
This information represents digit analysis information for 
DEFINITY ECS R7 or later. If you have an earlier version, you 
will notice somewhat...

Routing outgoing calls 
58 World class routing 
DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Understanding ARS analysis
With ARS, the switch routes outgoing calls based on the dialed 
digits and the calling privileges of the caller. Your system uses an 
ARS Digit Analysis Table to determine how to handle the dialed 
digits and uses class of restriction (COR) and facility restriction 
level (FRL) to determine the calling privileges.
Let’s look at a...

DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Routing outgoing calls 
59 World class routing 
Let’s say a caller places a call to +1 303 233 1000. The switch 
matches the dialed digits with those in the first column of the 
table. In this example, the dialed string matches the ‘1’. Then the 
systems matches the length of the entire dialed string (11 digits) 
to the minimum and maximum length columns. In our example, 
the 11-digit call that started...

Routing outgoing calls 
60 Modifying call routing 
DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Displaying ARS analysis information
You’ll want to become familiar with how your system currently 
routes outgoing calls. To display the ARS Digit Analysis Table 
that controls how the system routes calls that begin with 1:
1. Type 
display ars analysis 1 and press RETU RN.
The ARS Digit Analysis Table for dialed strings that begin 
with 1 appears. Note...

DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Routing outgoing calls 
61 Modifying call routing 
When you want to add a new area code or prefix, you look up the 
settings for the old area code or prefix and enter the same 
information for the new one.
Let’s add a new area code. When the California area code, 415, 
splits and portions change to 650, you’ll need to add this new area 
code to your system.
Tip:
If you do not need to use 1 for area code...

Routing outgoing calls 
62 Modifying call routing 
DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
3. Type change ars analysis 1650 and press RETU RN.
Enter 1 and the new area code (650). The ARS Digit 
Analysis Table screen appears.
ARS Digit Analysis Table
4. Use the arrow keys to move to a blank Dialed String field.
If the dialed string is already defined in your system, the 
cursor appears in the appropriate Dialed String field, 
where you can make...

DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
Routing outgoing calls 
63 Modifying call routing 
9. Enter the node number from step 2 in the Nd Num field.
For our example, you would leave the node number blank.
10. Press 
EN TER to save your changes.
To add a new prefix, follow the same directions, except use a 
shorter dial string (such as 
list ars route-chosen 2223333, 
where 
222 is the old prefix) and a dial type of hnpa.
Using ARS to restrict...

Routing outgoing calls 
64 Overriding call restrictions 
DEFINITY System’s Little Instruction Book
for basic administration  555-233-756  Issue 1
April 2000
To prevent callers from placing calls to Colombia (57):
1. Type 
change ars analysis 01157 and press RETU RN.
You enter 011 (international access) and the country code 
(57). The ARS Digit Analysis Table screen appears.
2. Use the arrow keys to move to a blank Dialed String field 
on the right of the screen.
If the dialed string is already defined in...