Home > Lucent Technologies > Communications System > Lucent Technologies Definity Release 8.2 Atm Installation Manual

Lucent Technologies Definity Release 8.2 Atm Installation Manual

Here you can view all the pages of manual Lucent Technologies Definity Release 8.2 Atm Installation Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 41

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-5 Synchronization Installation and Testing 
3
Installing  and  testing  the sync hronization sp litter involves interrup ting  the DS1 
sig nal p rovid ed  by the servic e p rovid er. Even thoug h the DS1 c irc uit p ac k should  
b e d own less than 5 minutes, b efore removing  a working  T1/E1 sp an, c ontac t the 
servic e p rovid er. Failure to notify the T1/E1...

Page 42

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-6 Synchronization Installation and Testing 
3
Figure 3-1. 400A synchronization splitter Figure Notes:
1. From network interface
2. Amp henol c onnec tion to 
DEFINITY ECS 3. Timing  outp ut p ort (J1) to the ATM switc h1
4. Timing  outp ut p ort (J2) to the ATM switc h1
1. Ports J1 and  J2 p rovid e id entical DS1 timing  source sig nals to the ATM switc hes. 
The...

Page 43

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-7 Synchronization Installation and Testing 
3
Figure 3-2. 401A synchronization splitter Figure Notes:
1. Amp henol c onnec tor to 
DEFINITY ECS
2. Network timing  c onnec tion3. Timing  alarm lead  c onnec tion
4. Timing  outp ut p orts (RJ45) to ATM switch
1
5. Jump ers and  c ap ac itors (insid e c ase). See 
Figure 3-5 for setting s.
1. Ports J1 and  J2 p rovid...

Page 44

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-8 Synchronization Installation and Testing 
3
Figure 3-3. 402A synchronization splitter Figure Notes:
1. Amp henol c onnec tor to 
DEFINITY ECS
2. Network timing  c onnec tion3. Timing  alarm lead  c onnec tion
4. Timing  outp ut p orts (RJ45) to ATM switch
1
5. Jump ers and  c ap ac itors (insid e c ase). See 
Figure 3-5 for setting s.
1. Ports J1 and  J2 p rovid...

Page 45

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-9 Synchronization Installation and Testing 
3
Figure 3-4. 403A synchronization splitter Figure Notes:
1. Amp henol c onnec tor to DEFINITY 
EC S
2. Sync hronization source (timing  
outp ut p orts) to ATM switc h
1
3. Sync hronization source (timing  
outp ut p orts) to ATM switc h1
1. These are id entic al DS1 timing source signals to the ATM switches. The ATM...

Page 46

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-10 Synchronization Installation and Testing 
3
Figure 3-5. Jumper settings (401A/402A/403A) Figure Notes:
1. Amp henol c onnec tion to DEFINITY 
EC S sw i t c h
2. Row of c ap acitors
3. Jumpers for incoming network 
c onnec tions
4. Incoming network transmit and 
receive connections
5. Jumper 1-2 =  true g round
Jumper 5-6 =  shield  ground ed
Jumper 3 =  TX cab...

Page 47

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-11 Synchronization Installation and Testing 
3
Synchronization splitter connections
The sp litter c onnec ts to a timing sourc e. Figure 3-6 shows the synchronization 
c onnec tions throug h a DSU/CSU (400A), and  Figure 3-7
 shows the 
sync hronization c onnec tions throug h an ICSU (400A). Figure 3-8
 shows the 
sync hronization c onnec tions d irec tly to the...

Page 48

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-12 Synchronization Installation and Testing 
3
Use the information in Table 3-3 to d etermine the maximum c able run leng ths for 
the configuration.
Figure 3-7. Synchronization connections through an ICSU (400A) Figure Notes:
1. Pub lic  Switc hed  Telep hone 
Network (PSTN)
2. Main Distribution Frame (MDF) or 
smart jac k
3. H600-383 q uad  c ab le
4. 400A T1...

Page 49

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-13 Synchronization Installation and Testing 
3
Figure 3-8. Synchronization connections directly to timing source 
(401A/402A/403A) Figure Notes:
1. Pub lic  switc hed telep hone network 
(PSTN )
2. Main d istrib ution frame (MDF) or 
smart jac k
3. H600-383 q uad  c ab le
4. 401A T1 (100 W) sp litter, 
402A E1 (120 W) splitter, or 
403A E1 (75 W) splitter c onnec...

Page 50

DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Installing a DEFINITY ECS ATM-PNC 
3-14 Synchronization Installation and Testing 
3
Use the information in Table 3-3 to d etermine the maximum c able run leng ths for 
the configuration.
Table 3-3. Maximum cable lengths 
Splitter Used in CableMaximum distance from 
splitter to ATM switch
400A
T1
100 W North Americ a
(USA and  Canad a)H600-383
1
shield ed  
twisted  p air
1. Must have RJ45 connectors...
Start reading Lucent Technologies Definity Release 8.2 Atm Installation Manual

Related Manuals for Lucent Technologies Definity Release 8.2 Atm Installation Manual

All Lucent Technologies manuals