Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 271
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 247 Multimedia Call Handling 9 Feature Description MMCH’s two levels of functionality for a multimedia complex, Basic and Enhanced mode, are enabled either by switch administration or by an mm-basic feature button or FAC. Basic Mode Operation In Basic Mode: nAll voice-only calls originate at the voice station. nAll multimedia calls originate with the H.320 DVC system. nAll incoming voice...
Page 272
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 248 Multimedia Call Handling 9 Enhanced Mode Operation The Enhanced multimedia complex provides a much more tightly coupled integration of the complex voice station and H.320 DVC system. In Enhanced Mode: nBoth multimedia and voice calls must originate at the telephone set. nVoice and multimedia calls can be controlled at the telephone set. nConferencing is spontaneous and established just...
Page 273
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 249 Multimedia Call Handling 9 The following endpoint-software packages have been tested: nPictureTel PCS 50 & PCS 100, Release 1.6T nProshare 2.0a, 2.1 nZydacron Z250 Ver. 2.02, Z350 Ver. 1.2 (With Netmeeting 2.0) MMI & VC hardware The MMCH feature requires the use of two additional circuit packs: nMulti Media Interface (MMI) TN787J. nVoice Conditioner (VC) TN788B. The TN787 and TN788 are...
Page 274
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 250 Multimedia Call Handling 9 ESM Installation Figure Notes Figure 11. Typical Multimedia Call handling ESM Connections Use the following procedure and Figure 11 to connect to the ESM equipment: 1. Install the TN2207 primary rate interface (PRI) circuit pack and the TN787 multimedia interface (MMI) circuit pack in the DEFINITY System port carrier. NOTE: These two circuit packs should be...
Page 275
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 251 Multimedia Call Handling 9 Planning for MMCH The following are some of the tasks you perform in planning and administering MMCH. Planning the system This is a list of questions to help you use DEFINITY ECS for multimedia. nHow many MMCH users are you going to have? nHow many multimedia calls do you expect to have at any given time? With the information above you can determine how many...
Page 276
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 252 Multimedia Call Handling 9 6. Administer multimedia complexes: nAdminister data modules — Data Module screen, or Data Module page of the Station screen. nAdminister stations as part of a multimedia complex, assign associated data module extension, multimedia mode, service link mode and appropriate multimedia buttons — Station screen. 7. Administer early answer and H.320 flag for stations,...
Page 277
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 253 Multimedia Call Handling 9 nCall Vector — Multimedia (optional) nFeature Access Codes — Basic Mode Activation (p.5) — Enhanced Mode Activation (p.5) — Multimedia Call Access Code (p.5) — Multimedia Data Conference Activation & Deactivation (p.5) The Multimedia Data Conference Deactivation FAC must be entered after you are active on a multimedia call. To enter the FAC: 1. Select TRANSFER 2....
Page 278
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 254 Multimedia Call Handling 9 Administration commands System-Parameters Customer-Options form: To enable the MMCH release 6.3 feature, you must change the System-Parameters Customer-Options form. There are two MMCH related fields on page 2 of this form. nThe “Multimedia Call Handling (Basic)” field must be set to ‘y’ to allow MMCH Basic mode operation. nThe “Multimedia Call Handling...
Page 279
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 255 Multimedia Call Handling 9 Screen 15. Data Module screen (Page 1 of 2) Screen 16. Data Module screen (Page 2 of 2) nTy p e — Set the data module type to 7500 or WCBRI. nMultimedia — This field appears on the data module screen only if MM is set to yes on the System-Parameters Customer Options screen. Enter Y to enable this data module to be multimedia compliant. nMM Complex Voice Ext:...
Page 280
DEFINITY ECS Release 8.2 Administrator’s Guide 555-233-506 Issue 1.1 June 2000 Managing multimedia calling 256 Multimedia Call Handling 9 Station screen After you have administered the BRI data module, use the Station screen to associate it with a voice station to screen a multimedia complex. This is a one-to-one relationship: you can administer only one station and one data endpoint per multimedia complex. Neither the voice station, nor the data endpoint can be a member of another multimedia...