Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 281

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
257 Multimedia Call Handling 
9
resources. When the service link is disconnected it does not tie up any 
resources. The Service Link Mode can be administered as either 
‘as-needed’ or ‘permanent’ as described below:
— As-Needed
 - Most non-call center multimedia users will be 
administered with this service link mode. The as-needed mode 
provides the Enhanced multimedia complex with a connected...

Page 282

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
258 Multimedia Call Handling 
9
nMultimedia Early Answer — Valid entries are y and n (default). This field 
lets you set this phone for early answer of multimedia calls. The system 
will answer the incoming multimedia call on behalf of the station and 
proceed to establish the H.320 protocol. After audio path has been 
established to the caller, the call will then alert at the voice station. The...

Page 283

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
259 Multimedia Call Handling 
9
nmm-basic — This button is only allowed on the voice station of a 
multimedia complex. The mm-basic button toggles a station between Basic 
and Enhanced modes. This button can NOT be used to change the station’s 
multimedia mode when the station has an active multimedia call 
appearance.
Toggling between Basic and Enhanced mode changes the station’s 
administered...

Page 284

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
260 Multimedia Call Handling 
9
nmm-cfwd — The mm-cfwd button allows a user to indicate that 
multimedia mode calls will be forwarded as multimedia mode calls to a 
specific forwarded-to destination. If voice call forwarding is active and 
multimedia call forwarding is not active then multimedia calls going off of 
the DEFINITY ECS switch will be forwarded as voice only calls.
The mm-cfwd button...

Page 285

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
261 Multimedia Call Handling 
9
From the system administration terminal:
1. Enter 
list configuration all, and a list of the installed carriers, circuit 
packs, and ports appears.
2. Record the location (board number) of the MMI board cabled to the 
TN2207 slot and verify that all other required circuit packs are present.
3. Enter 
add DS1 xxxxx, (where xxxxx is the location of the TN2207 PRI...

Page 286

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
262 Multimedia Call Handling 
9
Signaling-Group form, page 1
Screen 18. Signaling-Group Form (Page 1 of 5)
1. Enter add signaling-group next and the signaling-group form appears.
2. Change 
Associated Signaling field to y.
3. Change Primary D-Channel Port field to xxxx16 (where xxxx is the 
address of the TN2207 PRI circuit pack, for example: 1B0516).
4. The Max Number of NCA TSC default is 
0....

Page 287

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
263 Understanding the multimedia complex 
9
Understanding the multimedia 
complex
1-number access. 1-number access permits originating users to make voice or 
multimedia calls to a Basic multimedia complex by dialing the same number for 
either type of call. The number may be the voice station extension or the data 
module extension. If the incoming call is a voice call, DEFINITY ECS directs it...

Page 288

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
264 Understanding the multimedia complex 
9
Any voice station may use the following mechanisms to originate a 
multimedia call from the voice station. For stations that are not part of a 
multimedia complex, video cannot be provided. For voice stations that are 
part of a Basic multimedia complex, video is not provided until a 
multimedia call is made from the complex’s H.320 DVC system to the...

Page 289

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
265 Understanding the multimedia complex 
9
For calls with a bandwidth of 2B, use of the mm-call button to originate 
will cause the same destination address to be used for both channels of the 
2B call. See the section below on the mm-multinbr button/FAC for 
information on originating a 2B call where the destination has a different 
address for each B-channel. 
NOTE:
The mm-call feature access...

Page 290

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Managing multimedia calling 
266 Understanding the multimedia complex 
9
5.Multimedia Multi-number Call feature Access Code. For stations that do 
not have an administered mm-multinbr button, the Multimedia 
Multi-number call feature access code may be used instead. It allows 
origination of a multimedia call from a voice station. It is used when the 
destination being dialed requires a different address for each of the 2...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

All Lucent Technologies manuals