Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Instructions Manual

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1267 Call Detail Recording 
20
6 (E) Identifies calls that are not recorded because of resource exhaustion. A 
record with this condition code is generated for calls that are routed to the 
attendant or calls that require CDR to overwrite records. This also includes 
ISDN calls that did not complete at the far end, for which the Q.931 message 
included a cause value. It does not include ISDN...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1268 Call Detail Recording 
20
If the trunk-group CDR Reports field is set to ring, CDR records the ring 
time to answer or abandon for incoming calls originated by the trunk 
group. In addition, CDR indicates if the incoming destination is busy. This 
record is separate from the normal call duration record printed for an 
answered call. This information is indicated by the condition code....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1269 Call Detail Recording 
20
Table 46. Condition Code Override Matrix
CONDITION CODE
0146789ABCEFJK
0N
A0460N
AN
AN
ABCN
AN
AN
AN
A
10 N
A461N
A91BCEN
AJK
444N
A6444444N
AN
AJK
6666N
A6666666666
70146N
A797BCEFJ K
8N
AN
A467N
AN
A8BCEN
AN
AK
9N
A9469N
AN
AN
AN
ACE F N
AN
A
AN
A14678N
AN
ABCE F N
AN
A
BBB4 6 BBN
ABN
ABE F N
AK
CCC4 6 CCCCBN
AN
AN
AJK
EN
AEN
A6 EEEEEN
AN
AN
AEE
FN
AN
AN...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1270 Call Detail Recording 
20
nDate
You can include the date in customized records only. The format is based 
on the value of the CDR Date Format field on the CDR System Parameters 
form.
nDialed Number (dialed-num) — up to 23 digits
This field contains the number dialed. If it is an outgoing call, the field 
contains the number dialed by a system user. If it is an incoming call, the 
field...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1271 Call Detail Recording 
20
nFeature Flag (feat-flag) — 1 digit
The feature flag indicates whether a call received network answer 
supervision, and if the call was interworked in the network. The call 
duration starts at the point of receiving the network answer.
You can administer the feature flag (on the CDR System Parameters form) 
to reflect whether an outgoing ISDN call was reported...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1272 Call Detail Recording 
20
— If the call is an outgoing call and an authorization code is used to 
make the call, this field contains the FRL associated with the dialed 
authorization code.
— If the call is an incoming or tandem call, this field contains the FRL 
assigned to the incoming trunk group.
— If the call is an incoming tandem tie trunk call, this field contains 
either the FRL...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1273 Call Detail Recording 
20
nINS (3 digits)
This field specifies the ISDN Network Service requested for a call. This 
field applies only to ISDN calls. Each Network Specific Facility has a 
corresponding INS value, shown in Table 47
.
This field also appears as ISDN NSV (Network Service Value).
nISDN CC
The call charge supplied by the ISDN advice of charge function (see 
‘‘
Receiving...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1274 Call Detail Recording 
20
Users must dial an IXC access number to access a specific common 
carrier for a call. In the US, this number is in the form 10XXX, 950 
— 1XXX, or any 8–11 digit number. The IXC access numbers 
applicable at a given location are associated with an IXC code on the 
Inter-Exchange Carrier Codes form.
When ARS is used, and a route pattern inserts one of the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1275 Call Detail Recording 
20
The format of this field varies from record to record. For printer, Teleseer 
and 59-character formats, and the ISDN and enhanced forms of those 
records, the numbers appear inverted on the record. For example, the 
circuit ID 123 appears as 231 (tens, units, hundreds). If you want to change 
this to appear in hundreds, tens, units format (123), use the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1.1
June 2000
Features and technical reference 
1276 Call Detail Recording 
20
Table 48. Encoding for TSC Flag 
Encoding Meaning
0 Circuit-switched call without TSC requests
1–3 Reserved 
4 Call Associated TSC requested and accepted in response to SETUP, no 
congestion control (applicable to originating node). Call Associated 
TSC received and accepted via SETUP, no congestion control 
(applicable to terminating node).
5 Call Associated...