Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
837 Multifrequency-Signaling-Related System Parameters 
17
Screen 167. Multifrequency-Signaling-Related System Parameters screen 
Tones to CO on Outgoing Forward Calls — 
Group I
Message codes 11 to 15 appear. (Numbers 1 through 10 are assigned to the digits 
of the destination telephone number.)
Tones to CO on Outgoing Forward Calls — 
Group II
Message codes between 1 and 15 display. Assign a meaning to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
838 Multifrequency-Signaling-Related System Parameters 
17
Tones from CO on Outgoing Backward Calls — 
Group A
Message codes between 1 and 15 display. Assign a meaning to each code. 
Valid entries Usage
attendant
Refer to ‘‘Definitions of Group I, II, A, and B signals’’ on 
page 839 for signal type.
data-call
toll-auto
normal
Valid entries Usage
send-ani
Refer to ‘‘Definitions of Group I, II, A, and B...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
839 Multifrequency-Signaling-Related System Parameters 
17
Tones from CO on Outgoing Backward Calls — 
Group B
Message codes between 1 and 15 display. Assign a meaning to each code. Refer to 
‘‘
Definitions of Group I, II, A, and B signals’’ on page 839 for signal type.
Definitions of Group I, II, A, and B signals
Group I signals
Group I signals are a set of forward signals generated by the originating...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
840 Multifrequency-Signaling-Related System Parameters 
17
end-of-dial
This signal is used when open numbering is used on DID calls. The CO sends this 
signal to indicate the end-of-dial digits and the switch responds with a request for 
a group II signal.
end-of-digits
This signal is sent by the origination switch that makes outgoing calls, sends 
digits, and receives a next-digit group A signal from the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
841 Multifrequency-Signaling-Related System Parameters 
17
busy-rt-attd
If the switch receives this signal on DID calls, the call terminates at an attendant if 
the called extension is busy or at the called extension if it is not busy. This signal 
is used on DID calls.
data-call
This signal is treated the same as the data-verify signal except that it does not 
require a terminating extension to be a data...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
842 Multifrequency-Signaling-Related System Parameters 
17
toll-operator
This signal, used in China, is treated as a normal subscriber signal. See the normal 
definition.
Group A signals
Group A signals are backward signals generated by the destination switch.
send-ani
The CO sends this signal to request calling-party category and sends additional 
signals to request ANI digits. This signal is sent to the CO...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
843 Multifrequency-Signaling-Related System Parameters 
17
last-2-digits
The switch sends this signal to adjust the outpulsing pointer so that the last 3 digits 
can be resent. This signal is used on DOD calls.
last-3-digits
The switch sends this signal to adjust the outpulsing pointer so that the last 4 digits 
can be resent. This signal is used on DOD calls.
next-digit
The switch sends this signal to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
844 Multifrequency-Signaling-Related System Parameters 
17
free
This signal indicates that the called party is idle. On DID calls, the signal is sent to 
the CO to indicate that the called party is idle and the call is terminated 
successfully. If the switch receives this signal on DOD calls, it connects the trunk 
to the calling party.
intercept
This signal indicates that the called party number is not in...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
845 Music Sources 
17
Music Sources
This screen defines music sources for Tenant Partitions. Each music source 
defined on the screen can be used by one or more Tenant Partitions. However, a 
partition may have only one music source.
NOTE:
If you use equipment that rebroadcasts music or other copyrighted materials, 
you may be required to obtain a copyright license from, or pay fees to, a 
third party such...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
846 Packet Gateway Board 
17
Ty p e
If you entered a value in Music/Tone on Hold on the Feature-Related System 
Parameters screen, that value will appear in this field. 
Port
Enter the auxiliary trunk or analog port address of the music source. Duplicates 
are not allowed. This field appears only if you entered 
music in Type.
Description
Enter a description of the administered music source. This field...