Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
827 Multifrequency-Signaling-Related System Parameters 
17
Outgoing Forward Signal Present Timer (sec)
This field appears only when the value of Outgoing Call Type is 
group-ii-mfc.
Outgoing Forward Signal Absent Timer (sec)
This field appears only when the content of Outgoing Call Type is 
group-ii-mfc.
Multifrequency Signaling Incoming Intercept 
Treatment
Overlap Sending on Link-to-Link Tandem Calls
A...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
828 Multifrequency-Signaling-Related System Parameters 
17
Private Group II Permissions and Public 
Interworking
Convert First Digit End-of-ANI To
Collect All Digits Before Seizure
This field appears only when Outgoing Call Type is 
group-ii-mfc or mfe.
Request Incoming ANI (non-AAR/ARS)
This field only applies if the incoming call via the R2-MFC trunk is terminating to 
a local station on this PBX.
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
829 Multifrequency-Signaling-Related System Parameters 
17
Forward Cycle Timer (sec)
This field appears only if Incoming Call Type is 
mfe and Outgoing Call Type is 
mfe or none.
Backward Cycle Timer (sec)
This field appears only if Incoming Call Type is 
mfe and Outgoing Call Type is 
mfe or none.
Incomplete Dial Timer (sec)
This field appears only if Incoming Call Type is 
mfe and Outgoing Call Type is...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
830 Multifrequency-Signaling-Related System Parameters 
17
Note: For India, the ANI can be requested without the call category information.
Use COR for Calling Party Category
Indicates the category to send with ANI if requested on an outgoing R2-MFC call.
Outgoing Shuttle Exchange Cycle Timer (sec)
This field applies only to calls made from DEFINITY ECS.
Field descriptions for page 2
The fields on Page 2...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
831 Multifrequency-Signaling-Related System Parameters 
17
Screen 165. Multifrequency-Signaling-Related Parameters screen
Request Call Category at Start of Call
Indicates that the Send-ANI backward signal requesting for the caller-category 
information will be sequenced differently in the MFC signaling flow. The 
Caller-category Request backward signal is disjointed from the ANI request.
Restart ANI from...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
832 Multifrequency-Signaling-Related System Parameters 
17
Number of Incoming ANI Digits
Number of Outgoing ANI Digits
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Truncate Station Number in ANI 
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
ANI Source for Forwarded Calls
Valid entries Usage
0
 to 15Enter the number of ANI digits for incoming MFC calls.
Valid...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
833 Multifrequency-Signaling-Related System Parameters 
17
Address Digits Include End-of-Digits Signal
Indicates that an outgoing forward Group I end-of-digit signal is always sent after 
completion of address digits upon request from the Central Office for outgoing 
calls.
Call Category for Vector ii-digits
Allows you to use the call category digit as the ii-digits on call vector steps.
Request CPN at Start...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
834 Multifrequency-Signaling-Related System Parameters 
17
ANI Not Available
You must enter a value if the ANI for PBX field is blank
Field descriptions for page 3
The fields shown on Page 3 of the Multifrequency-Signaling-Related System 
Parameters screen define the meaning of MFC tones for calls originated at the CO. 
Refer to ‘‘
Definitions of Group I, II, A, and B signals’’ on page 839 for more...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
835 Multifrequency-Signaling-Related System Parameters 
17
Tones from CO on Incoming Forward Calls — 
Group I
Message codes 11 to 15 display. (Numbers 1 through 10 are assigned to the digits 
of the destination telephone number.) Assign a meaning to each code. Refer to 
‘‘
Definitions of Group I, II, A, and B signals’’ on page 839 for signal type.
Tones from CO on Incoming Forward Calls — 
Group II 
Message...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
836 Multifrequency-Signaling-Related System Parameters 
17
Tones from CO on Incoming Forward Calls — 
Group I
Message codes 11 to 15 display. (Numbers 1 through 10 are assigned to the digits 
of the destination telephone number.) Assign a meaning to each code. 
Tones to CO on Incoming Backward Calls — 
Group B
This field does not appear if the Do Not Send Group B Signals to CO field is 
y. 
Message codes...