Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
817 Modem Pool Group 
17
Modem Pool Group
There are two types of conversion resources for Modem Pooling. The first type, an 
integrated conversion resource, is a circuit pack that emulates a Trunk Data 
Module connected to a 212A-type modem. Two conversion resources are on each 
circuit pack.
The second type, a combined conversion resource, is a separate Trunk Data 
Module and modem administered as a unit....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
818 Modem Pool Group 
17
Screen 163. Modem Pool Group — Combined screen if Group Type is combined
Group Number
A display-only field when the screen is accessed using an administration 
command such as 
add or change.
Group Type
This field designates what physical model pool you are going to.
Receiver Responds to Remote Loop
This field appears only when the Group Type field is 
integrated.
Valid entries...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
819 Modem Pool Group 
17
Modem Name
Indicates the name of the modem pool. This field appears only when the Group 
Type field is 
combined.
Hold Time (min)
Enter the maximum number of minutes that a conversion resource in the group 
may be held while a call waits in a queue or reserved after Data Call Preindication.
Send Space Disconnect 
This field appears only when the Group Type field is 
integrated.
Time...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
820 Modem Pool Group 
17
CF-CB Common
This field appears only when the Group Type field is 
integrated.
Direction
Enter the direction of the call for which modem pool will operate. This field 
appears only when the Group Type field is 
combined.
The following fields (Speed, Duplex, and Synchronization) cannot be filled out 
for the “integrated” pooled modem screens but can be assigned on the “combined”...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
821 Modem Pool Group 
17
Speed
Enter the communication speed in bits per second of the conversion resources in 
the group. Enter one to three speeds separated by slashes (for example, 
300/1200/2400) to indicate a maximum of three running speeds.
Duplex
Indicates the duplex mode of the conversion resources in the group.
Synchronization
Indicates the synchronization mode of the conversion resources in the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
822 Modem Pool Group 
17
Circuit Pack Location
Enter the port associated with the conversion resource on the integrated modem 
pool circuit pack.
For example, 01A0612 is in cabinet 01, carrier A, slot 06, and circuit number 
(port) 12.
PORT PAIR ASSIGNMENTS are optional on “combined” pooled modem screens 
only.
Analog Digital 
Enter the port numbers of the modem/TDM pair in a conversion resource.
NOTE:
Two...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
823 Multifrequency-Signaling-Related System Parameters 
17
Multifrequency-Signaling-Related
System Parameters
This screen sets the system parameters associated with multifrequency signaling. 
Screen 164 on page 823
 appears when Incoming Call Type is group-ii-mfc and 
Outgoing Call Type is 
none. Screen 165 on page 831 appears when both 
Incoming Call Type and Outgoing Call Type are 
group-ii-mfc.
Screen...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
824 Multifrequency-Signaling-Related System Parameters 
17
Incoming Call Type
This field defines the signal type that a CO uses to place an incoming call to the 
PBX.
ANI Prefix
This field appears only when Outgoing Call Type is 
group-ii-mfc or mfe.
Outgoing Call Type
This field defines the signal type that the PBX uses to place an outgoing call into a 
CO.
Valid entries Usage
group-ii-mfc
  If the value of...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
825 Multifrequency-Signaling-Related System Parameters 
17
ANI for PBX
This field appears only when Outgoing Call Type is 
group-ii-mfc or mfe.
MFE Type
This field only appears when Incoming Call Type is 
mfe and the Outgoing Call 
Type is 
mfe or none.
Maintenance Call Type
Next ANI Digit
This field appears when Outgoing Call Type is 
group-ii-mfc.
Valid entries Usage
2
 to 15 Enter the PBX identification...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
826 Multifrequency-Signaling-Related System Parameters 
17
Test Call Extension
Interdigit Timer (sec)
Specify the maximum number of seconds the switch will wait for the first forward 
signal (digit) to arrive, and for subsequent digits to arrive. Intercept returns to the 
calling party if this timer expires.
Maximum Resent Requests
Received Signal Gain (-Loss) (dB)
Transmitted Signal Gain (-Loss) (dB)
Valid...