Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
807 Login Administration 
17
Facility Test Call Notification — 
Acknowledgment Required
Remote Access Notification
For security, this field should be set to y for all logins.
Remote Access Notification — 
Acknowledgment Required
Access Security Gateway
This field appears only if the Access Security Gateway (ASG) field on the 
System-Parameters Customer-Options screen is set to y. 
Field descriptions for page...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
808 Login Administration 
17
Screen 159. Access Security Gateway Login Administration
Blocked
Setting the Blocked field to y does not remove the login ID from the system.
System Generated Secret Key
Secret Key
The value of this field is only displayed during the initial add or change login 
command to allow it to be programmed into any ASG Site Manager, ASG Mobile, 
or ASG Pass-Key used to interact with ASG...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
809 Login Administration 
17
Expiration Date
Expiration of the login ID occurs at 23:59:59 of the entered date. This field 
consists of three fields separated by forward slashes (for example, 01/01/1999). 
Expiration of a login ID does not remove the login ID from the system. The 
system accepts administration of year 2000 dates. 
If an login ID requiring ASG authentication has expired, the login ID for the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
810 Loudspeaker Paging 
17
Restrict From Time and Restrict to Time
These two fields are separated by colons, for example, hh:mm where hh = hour 
and mm = minute. Periods that span an interval that crosses a day boundary are 
specified by setting the Restrict From Time field greater than the Restrict To Time 
field. For example, a Restriction From Time of 17:00 and a Restrict To Time of 
08:00 limits access...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
811 Loudspeaker Paging 
17
CDR
This field determines whether CDR data is collected for the paging ports.
Voice Paging Timeout (sec)
This field limits the duration of voice pages. When this interval ends, calls are 
disconnected. To determine the best setting, time the typical pages you expect to 
broadcast and then add another 4 to 5 seconds.
Code Calling Playing Cycles
This field sets the number of times a...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
812 Loudspeaker Paging 
17
Voice Paging — TAC
This field assigns a Trunk Access Code (TAC) to a paging zone. Users dial this 
code to make a page to a specific zone. One TAC must be assigned to each zone 
you want to use. Two zones cannot have the same TAC. If you enter a TAC in the 
ALL field, users may activate speakers in all the zones by dialing that code.
Voice Paging — COR
This field assigns a Class of...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
813 Mode Code Related System Parameters 
17
Code Calling — COR
This field assigns a Class of Restriction to a paging zone.
Code Calling — TN
Location
Related topics
Refer to ‘‘
Setting up voice paging over loudspeakers’’ on page 375 or ‘‘Setting up 
chime paging over loudspeakers’’ on page 378 for instructions.
Refer to ‘‘
Loudspeaker paging’’ on page 1416 for a description of the feature.
Mode Code Related...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
814 Mode Code Related System Parameters 
17
Field descriptions for page 1
Screen 161. Mode Code Related System Parameters 
Direct Inside Access
This value defines a mode code that the switch sends when a caller at an internal 
extension dials the Voice Mail System (VMS) access number.
Direct Dial Access - Trunk
This value defines a mode code that the switch sends when an external caller dials 
the VMS access...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
815 Mode Code Related System Parameters 
17
External Coverage
This value defines a mode code that the switch sends when an external caller tries 
to reach a user at another extension and the call goes to the user’s voice mail 
coverage.
Refresh MW Lamp
This value defines a mode code that the switch sends during a system level 3 or 
higher reset that requests the VMS to refresh the Message Waiting (MW) lamps....

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
816 Mode Code Related System Parameters 
17
OFF
Sending Delay
VMS Hunt Group Extension
A check is made to verify that a valid hunt group extension is entered, but a check 
is not made to verify that the hunt group members are VMI extensions.
Remote VMS Extensions - First 
You can administer this field if the Mode Code for Centralized Voice Mail field on 
the System-Parameters Customer-Options screen is set...