Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
47 Using TTI to move phones 
3
Instructions
TTI merge from a voice TTI port
!CAUTION:
You can destroy your hardware if you attempt to connect an analog 
telephone to a digital port.
To merge an extension to a telephone with TTI, complete the following steps from 
the telephone you want to merge:
1. Dial the TTI merge FAC.
— If the code is correct, you receive dial tone.
— If the code is not correct, you...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
48 Using TTI to move phones 
3
TTI separation from a telephone
To complete a TTI separation, complete the following steps from the telephone 
that needs to be separated:
1. Dial the TTI separate FAC.
2. Dial the TTI security code.
— If the code is correct, you receive dial tone.
— If the code is not correct, you receive intercept tone.
3. Dial the extension of the telephone to be separated.
— If you have...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
49 Removing phones 
3
translation. This can happen when the number of telephones allowed by the 
system is twice the number of data terminals. For example, if the system 
limit for telephones is 15,000 and 7,500 for data, then when TTI was turned 
on for data first, only the first 7,500 unadministered ports would get TTI 
port translations.
nWhen TTI is activated for the system, the following actions take...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
50 Removing phones 
3
3. Type list groups-of-extension 1234 and press RETURN.
The Extension Group Membership screen shows whether the extension is a 
member of any groups on the system.
4. Press 
CANCEL.
5. If the extension belongs to a group, access the group screen and delete the 
extension from that group.
For example, if extension 1234 belongs to pickup group 2, type 
change 
pickup group 2
 and delete...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
51 Adding a fax or modem 
3
Now you can unplug the set from the jack and store it for future use. You do not 
need to disconnect the wiring at the cross-connect field. The extension and port 
address remain available for assignment at a later date.
Once you successfully remove a set, that set is permanently erased from system 
memory. If you want to reactivate the set, you have to add it again as though it...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
52 Adding a DEFINITY IP Softphone 
3
Adding a DEFINITY IP Softphone
DEFINITY IP Softphones enable the end user to control telephone calls directly 
from a personal computer (PC). An end user can log into your company’s 
DEFINITY server remotely and make and receive telephone calls from the 
telephone extension. 
DEFINITY IP Softphone supports the following two configurations:
nroad-warrior application
You...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
53 Adding a DEFINITY IP Softphone 
3
Instructions for adding a road-warrior 
application
You can use the road-warrior application when you have only a single telephone 
line available to access the DEFINITY system over the IP network.
Let’s add a road-warrior application at extension 3001. You have to actually 
administer two extensions for each road-warrior application, so we will first add 
an H.323...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
54 Adding a DEFINITY IP Softphone 
3
2. In the Type field, enter the model of phone you want to use, such as 6408D. 
3. In the Port field, type 
x for virtual phone or enter the port number if there is 
hardware.
4. In the Security Code field, enter the password for this remote user, such as 
1234321.
This password can be up to 7 digits in length.
5. In the Media Complex Ext field, type 
3000.
This is the...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
55 Adding a DEFINITY IP Softphone 
3
NOTE:
Use the add station command if this is a new DCP extension. Use 
the 
change station command for an existing DCP extension and 
ignore steps 2 and 3.) 
2. In the Port field, type 
x for virtual phone or enter the port number if there is 
hardware.
3. In the Security Code field, enter the password for this remote user, such as 
1234321.
This password can be up to 7...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Managing phones 
56 Adding a DEFINITY IP Softphone 
3