LG Flatron M2080d Owners Manual

							71
PICTURE  CONTROL
This feature lets you adjust the picture quality of the original image.
Use  this  to  calibrate  the  screen  quality  by  adjusting  the  Black  and  White  Level  etc.  General  users  can 
calibrate the screen quality by easily following each stage.
When  you  adjust  the  image  to  Low,  Recommended  or  High,  you  can  see  the  changed  result  as  an 
example.
In RGB-PC / HDMI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE WIZARD
MoveOKPICTURE
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Vivid
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
Picture Wizard                                                       ꔉ 
➩
NextPrevious
Picture Wizard
With  Picture  Wizard,  you  can  adjust  the  picture  quality  of  the 
original image.
1
2
4
5 3
MENU
Select Picture Wizard.
Select input source to apply the settings.
Adjust 
Black level, White level, Colour, Tint, Horizontal Sharpness, Vertical Sharpness, 
Colour Temperature, Dynamic Contrast , Colour Gain, Backlight.
Select 
PICTURE.
• If you stop the setting before the final stage, the 
changes will not be applied
• The adjustment value is saved to  Expert 1.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
   
						

							72
PICTURE CONTROL
PICTURE  CONTROL
It reduces the TV’s power consumption.
The default factory setting is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the 
Picture Mode.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is fin -
ished.
Selecting  ‘Screen Off’ while tuned to a radio station channel will reduce power consumption.
ꕊ ENERGY SAVING
MoveMove
OK OKPICTUREPICTURE
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Vivid
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Vivid
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
 ꕊ Energy Saving   : Off                                    ꔉ  ꕊ Energy Saving   : Off                                    ꔉ ➩
Off
Minimum
Medium
Maximum
Screen OffOff ꔉ 
1
2
3
4
MENU
Select ꕊ  Energy Saving.
Select  Off, Minimum, Medium, Maximum  or Screen Off.
Select 
PICTURE.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
• When you select Screen Off, the screen will be turned off in 3 seconds and Screen Off will start. And 
the TV is disabled to be automatically turned off.
• You can also adjust this feature by selecting  Energy Saving button on the remote control.
• If you want to return from Screen off, input any key.
 
						

							73
PICTURE  CONTROL
Vivid    Strengthen the contrast, brightness, colour and sharpness for vivid picture.
Standard  The most general screen display status.
Cinema  Optimizes video for watching movies.
Sport   Optimizes  video for watching sports events.
Game   Optimizes video for playing games.
Picture Mode-Preset
PRESET PICTURE SETTINGS
MoveMove
OK OKPICTUREPICTURE
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Vivid
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Vivid
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
 Picture Mode  : Vivid                                 ꔉ  Picture Mode  :  Vivid                                 ꔉ ➩
1
2
3
4
MENU
Select Picture Mode.
Select  Vivid, Standard, Cinema, Sport  or Game
Select 
PICTURE.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
• Picture  Mode   adjusts  the  TV  for  the  best  picture  appearance.  Select  the  preset  value  in  the  Picture 
Mode  menu based on the programme category.
• You can also adjust Picture Mode in the  Q. Menu.
Vivid
Standard
Cinema
Sport
Game
ꕋ Expert 1
ꕋ  Expert 2Vivid ꔉ 
   
						

							74
PICTURE CONTROL
PICTURE  CONTROL
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast Adjusts the signal level between black and white in the picture. You may use Contrast when the bright 
part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture.
Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour Adjusts intensity of all colours.
Tint Adjusts the balance between red and green levels.
Colour Temperature Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
Picture Mode-User option
MANUAL PICTURE ADJUSTMENT
MoveMove
OK OKPICTUREPICTURE
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Standard
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
Aspect Ratio  : 16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Standard
 •  Backlight    1 00
 • Contrast  1 00
 • Brightness  5 0
 • Sharpness  7 0
▼
 Picture Mode  : Vivid                                 ꔉ  Picture Mode  :  Vivid                                 ꔉ ➩
1
4 2
5 3
MENU
Select Picture Mode.
Make appropriate adjustments. Select  Vivid, Standard, Cinema, Sport  or Game
Select 
PICTURE.
Select  Backlight,  Contrast,  Brightness,  Sharpness,  Colour,  Tint  or Colour 
Temperature.  
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
NOTE
 ►You cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.
 ►When  the  Expert  1/2  is  selected,  you  can  select  Backlight,  Contrast,  Brightness,  H  Sharpness,  V 
Sharpness, Colour  or Tint  .
!
Vivid
Standard
Cinema
Sport
Game
ꕋ  Expert 1
ꕋ  Expert 2Vivid ꔉ 
 
						

							75
PICTURE  CONTROL
You can calibrate the screen for each Picture Mode or set the video value according to the special video 
screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture 
Reset”  function for each  Picture Mode.
PICTURE IMPROVEMENT TECHNOLOGY
MoveMove
OK OKPICTUREPICTURE
     ▲ •  Brightness  5 0 • Sharpness  7 0 • Colour  5 0 • Tint  0 • Colour Temperature 0 •  Advanced Control • Picture ResetScreen
     ▲ •  Brightness  5 0 • Sharpness  7 0 • Colour  5 0 • Tint  0 • Colour Temperature 0 •  Advanced Control • Picture ResetScreen
 •  Advanced Control             ꔉ  • Advanced Control             ꔉ 
➩
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
◄  High  ►
Off
Off
Off
Off
Off
Dynamic Contrast
Dynamic Colour
Noise Reduction
Gamma
Black Level
Film Mode
Close
1
2
3
4
MENU
Select Advanced Control.
Select your desired Source. Select 
Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level 
or  Film Mode. (Refer to p. 77 to 78)
Select 
PICTURE.
   
						

							76
PICTURE CONTROL
PICTURE  CONTROL
By segmenting categories, Expert 1 and Expert 2  provide more categories which users can set as they 
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
EXPERT PICTURE CONTROL
MoveOKPICTURE
Aspect Ratio  :  16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Standard
 •  Backlight    7 0
 • Contrast  9 0
 • Brightness  5 0
 • H Sharpness  7 0
▼
 Picture Mode  : ꕋ Expert 1                          ꔉ ➩
MoveOKPICTURE
     ▲ •  Contrast  9 0 • Brightness  5 0 • H Sharpness  5 0 • V Sharpness  4 9  • Colour  50 • Tint  0 •  Advanced Control • Picture Reset▼
 •  Expert Control                   ꔉ 
◄    Medium   ►
Off
Off
Off
High
HD
Off
Off
Warm
Dynamic Contrast
Nosie Reduction
Gamma
Black Level
Film Mode
Colour Standard
Expert Pattern
Colour Filter
Colour Temperature
Close
1
2
3
4
5
6
MENU
Select Picture Mode.
Select  Expert Control .
Select your desired Source.
Make appropriate adjustments. Select 
 ꕋ  Expert 1  or ꕋ  Expert 2.
Select 
PICTURE.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Vivid
Standard
Cinema
Sport
Game
ꕋ Expert 1
ꕋ  Expert 2
ꕋ Expert 1 ꔉ 
 
						

							77
PICTURE  CONTROL
Dynamic Contrast(Off/Low/High) ■ Adjusts the contrast to keep it at the best level according to the brightness 
of the screen. The picture is improved by making bright parts brighter and 
dark parts darker.
Dynamic Colour (Off/Low/High )
 ■ Adjusts  screen  colours  so  that  they  look  livelier,  richer  and  clearer.  This 
feature enhances hue, saturation and luminance so that red, blue, green 
and white look more vivid.
Noise Reduction
(Off/Low/Medium/High)
 ■ Reduces screen noise without compromising video quality.
Gamma
(Low/Medium/High)
 ■ You can adjust brightness of dark area and middle gray level area of 
the picture.
  • Low: Make dark and middle gray level area of the picture brighter.
  • Medium: Express original picture levels.
  • High: Make dark and middle gray level area of the picture darker.
Black Level
(Low/High/Auto) • 
Low : The picture of the screen gets darker.
•  High: The picture of the screen gets brighter.
•  Auto: Realizing the black level of the screen and set it to High or Low 
automatically.
 ■ Set black level of the screen to proper level.
 ■This function enables to select  'Low' or 'High' in the following mode: 
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 
'Auto'.
Film Mode (On/Off)
 ■ You can watch a cinema-like video by eliminating judder effect.
 ■Use this function when you watch movies.
Colour Standard (SD/HD)
 ■Converts the colour of a different video to HD colour. This function is 
set for SD video (BT-601) and HD video (BT-709) colour format.
   
						

							78
PICTURE CONTROL
PICTURE  CONTROL
Expert Pattern
(Off/Expert 1/Expert 2) ■ This is the pattern necessary for expert adjustment.
 ■This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
 ■ This is the function to filter the specific colours of the video.
    You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature
 (Medium/Warm/Cool)
 ■ This  is  the  function  to  adjust  the  overall  colour  of  the  screen  to  the 
feeling you want.
a. • Method: 2 Points
    • Pattern: Inner, Outer
    • Red/Green/Blue Contrast, Red/Green/Blue Brightness :
      The adjustment range is -50 to +50.
b. • Method: 10 point IRE
    • Pattern: Inner / Outer
    • IRE (Institute of Radio Engineers) is the unit to display the size of 
      the video signal and can be set among 10, 20, 30 to 100. You can  adjust Red, Green or Blue according to each setting.
    • Red/Green/Blue: The adjustment range is -50 to +50.
Colour Management System
 ■As  the  tool  used  by  the  experts  to  make  adjustments  by  using  the 
test  patterns,  this  does  not  affect  other  colours  but  can  be  used  to 
selectively  adjust  the  6  colour  areas  (Red/Green/Blue/Cyan/
Magenta/Yellow).
Colour  difference  may  not  be  distinctive  even  when  you  make  the 
adjustments for the general video.
 ■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan/Magenta  Colour:  The  adjustment 
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range 
is -30 to +30.
 ■This feature is disable in RGB-PC and HDMI (PC) mode.
 
						

							79
PICTURE  CONTROL
Settings of the selected picture modes BACK  to the default factory settings.
PICTURE RESET
MoveMove
OK OKPICTUREPICTURE
     ▲ •  Brightness  5 0 • Sharpness  7 0 • Colour  5 0 • Tint  0 • Colour Temperature 0 •  Advanced Control • Picture ResetScreen
     ▲ •  Brightness  5 0 • Sharpness  7 0 • Colour  6 0 • Tint  0 • Colour Temperature 0 •  Advanced Control • Picture ResetScreen
 •  Picture Reset                    ꔉ  • Picture Reset            ꔉ 
➩
NOYes
?All picture setting will be resetted.
continue?
1
2
3
4
MENU
Select Picture Reset.
Select  Yes or No.
Select 
PICTURE.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
   
						

							80
PICTURE CONTROL
PICTURE  CONTROL
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.


M2080D / M2080DF / M2080D / M2080DN
M2280D / M2380D / M2780D
M2280DF / M2380DF / 2780DF
M2280DB / M2380DB
M2280DN / M2380DN / M2780DN
SCREEN SETUP FOR PC MODE
MoveOKPICTURE
      ▲ •  Brightness  5 0 • Sharpness  7 0 • Colour  5 0 • Tint  0 • Colour Temperature 0 •  Advanced Control • Picture ResetScreen  Screen                                                          ꔉ 
➩
Resolution     ►
Auto Config.
Position
Size
Phase
Reset 1024 x 768
1280 x 768
1360 x 768 1280 x 960
1440 x 900
1600 x 900
1280 x 960
1440 x 900
1600 x 900
Resolution     ►
Auto Config.
Position
Size
Phase
Reset
Resolution     ►
Auto Config.
Position
Size
Phase
Reset
MovePrev.SCREEN SCREEN
SCREEN
1
2
3
4
5
MENU
Select Screen.
Select  Resolution.
Select the desired resolution. Select  PICTURE.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
MovePrev.
MovePrev.