LG Flatron M2080d Owners Manual

							131
TO  USE A  USB  DEVICE
Using the remote control
◄◄ / ►►When playing, 
repeatedly, press the REW(
◄◄) button to speed up  ◄◄(x2) →  ◄◄◄ (x4) 
→  ◄◄◄◄ (x8) → ◄◄◄◄◄(x16) →◄◄◄◄◄◄ (x32) .
repeatedly, press the FF( ►►) button to speed up  ►►(x2) →  ►►► (x4) → 
►►►►  (x8) → ►►►►► (x16) → ►►►►►► (x32).
■ Pressing these buttons repeatedly increases the fast forward/reverse speed.
During playback, press the  Pause (II) button.
■ Still screen is displayed. ■ If no buttons are pressed on the remote control for 10 minutes after paus- ing, the TV returns to the playback state.
■ Press the  Pause (II) button and then use the  FF (►► ) button for slow motion.
<  > When using the < or >  button during playback a cursor indicating the position
can be viewed on the screen.
Play(►) Press the Play(►) button to return to normal playback.
Press the ENERGY SAVING button repeatedly to increase the brightness of 
your screen. (Refer to p. 72)
   
						

							132
TO USE A USB DEVICE
TO  USE A  USB  DEVICE
Confirm  the  DivX  registration  code  number  of  the  TV.  Using  the  registration  number,  movies  can  be 
rented or purchased at www.divx.com/vod.
With  a  DivX  registration  code  from  other  TV,  playback  of  rented  or  purchased  DivX  file  is  not  allowed. 
(Only DivX files matched with the registration code of the purchased TV are playable.)
DIVX REGISTRATION CODE
USB USBMove Move
OK OK
Photo List
Music List
Movie List
DivX Reg. Code
DeactivationPhoto List
Music List
Movie List
DivX Reg. Code
Deactivation
DivX Reg. Code                                      
ꔉ DivX Reg. Code                                      ꔉ ➩DivX(R) Video On Demand
Your registration Code is: xxxxxxxxxx
To learn more visit www.divx.com/vod.
Close
1
2
3
Select  DivX Reg. Code.
Display  DivX Reg. Code.Select 
USB.
MENU
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen. 
NOTE
 ►Movie files are supported as follows
Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
 ►Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 
1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2
!
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of 
Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play pur -
chased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.
com for more information on how to complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and 
are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
 
						

							133
TO  USE A  USB  DEVICE
The purpose of deactivation is to allow deactivation of devices for users who have activated all the avail-
able devices through the web server and are blocked from activating more devices. DivX VOD allowed 
the  consumer  to  activate  up  to  6  devices  under  one  account,  but  to  replace  or  deactivate  any  of  those 
devices, the consumer had to contact DivX Support and request deletion. Now with this added feature, 
consumers  will  be  able  to  deactivate  the  device  themselves  and  hence  better  manage  their  DivX  VOD 
devices.
DEACTIVATION
USB USBMove Move
OK OK
Photo List
Music List
Movie List
DivX Reg. Code
DeactivationPhoto List
Music List
Movie List
DivX Reg. Code
Deactivation
Deactivation                                            
ꔉ Deactivation                                            ꔉ 
➩
➩DivX(R) Video On Demand
Do you want to deactivate your device?
YesNo
1
2
3
4
Select  Deactivation.
Select  Yes.
Display  Deactivation.Select 
USB.
MENU
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Close
   
						

							134
TELETEXT
TELETEXT
Teletext is a free service broadcast by most TV stations which gives up-to-
the-minute  information  on  news,  weather,  television  programmes,  share 
prices and many other topics.
The  teletext  decoder  of  this  TV  can  support  the  SIMPLE,  TOP  and 
FASTEXT   systems.  SIMPLE  (standard  teletext)  consists  of  a  number  of 
pages  which  are  selected  by  directly  entering  the  corresponding  page 
number.  TOP  and  FASTEXT   are  more  modern  methods  allowing  quick 
and easy selection of teletext information.
Enter the desired page number as a three-digit number with the NUMBER buttons. If during selection you 
press  a  wrong  number,  you  must  complete  the  three-digit  number  and  then  re-enter  the  correct  page 
number.
The P ꕌꕍ  button can be used to select the previous or next page.
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group. 
Alternatively, the   P  ꕌ button can be used.
The RED button permits you to return to previous selection. Alternatively, the  P ꕍ button can be used.
As  with  SIMPLE  teletext  mode,  you  can  select  a  page  by  entering  it  as  a  three  digit  number  using  the 
NUMBER buttons in TOP mode.
This feature is not available in all countries.
 ■
Page selection
 ■Block / group / page selection
 ■Direct page selection
Press  the 
TEXT  button  to  switch  to  teletext. The  initial  page  or  last  page 
appears on the screen.
Two page numbers,  TV station name, date and time are displayed on the 
screen headline. The first page number indicates your selection, while the 
second shows the current page displayed.
Press the  TEXT or EXIT  button to switch off teletext. The previous mode 
reappears.
The  user  guide  displays  four  fields-red,  green,  yellow  and  blue  at  the  bottom  of  the  screen. The  yellow 
field denotes the next group and the blue field indicates the next block.
SWITCH ON/OFF
TOP TEXT SIMPLE TEXT
1
1
2
2
3
4
 
						

							135
TELETEXT
Press the T.OPT button and then use  ꕌꕍ button to select  ꔻ menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured 
buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with 
the NUMBER buttons in FASTEXT mode.
The  P ꕌꕍ  button can be used to select the preceding or following page.
 ■Page selection
 ■Press the  T. OPT button and then use  ꕌꕍ button to select the  Text Option menu.
ꔻ Index
Select the each index page.
ꔾ  Time
When  viewing  a TV  programme,  select  this  menu  to  display  the  time  at  the  top 
right hand corner of the screen.
In  the  teletext  mode,  press  this  button  to  select  a  sub  page  number.  The  sub 
page number is displayed at the bottom of the screen. To hold or change the sub 
page, press the RED/GREEN, < > or NUMBER buttons.
ꕀ  Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. 
The  number  of  sub  pages  and  the  sub  page  displayed  is,  usually,  shown  on  the  screen  below  the 
time.  When  this  menu  is  selected  the  stop  symbol  is  displayed  at  the  top  left-hand  corner  of  the 
screen and the automatic page change is inactive.
ꔽ Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
ꔼ Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear 
at the top left hand corner of the screen. When the updated page is available then display will change 
to the page number. Select this menu again to view the updated teletext page.
The  teletext  pages  are  colour  coded  along  the  bottom  of  the  screen  and  are  selected  by  pressing  the 
corresponding coloured button.
FASTEXT
SPECIAL TELETEXT FUNCTION 
1
2
3
4
Index
Time
Hold
Reveal
Update
Text Option
Close
   
						

							136
DIGITAL  TELETEXT
DIGITAL TELETEXT
The  TV  gives  you  access  to  digital  teletext  which  is  greatly  improved  in  various  aspects  such  as  text, 
graphics etc.
This  digital  teletext  can  access  special  digital  teletext  services  and  specific  services  which  broadcast 
digital teletext.
You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
*This function works in UK, Ireland only.
TELETEXT WITHIN DIGITAL SERVICE
TELETEXT IN DIGITAL SERVICE
Press  the  numeric  or 
P ꕌꕍ   button  to  select  a  digital 
service which broadcasts digital teletext.
Follow  the  indications  on  digital  teletext  and  move 
onto  the  next  step  by  pressing  TEXT,  OK, ꕌꕍ<  >  , 
RED, GREEN, YELLOW, BLUE  or NUMBER  buttons 
and etc.
To  change  digital  teletext  service,  select  a  different 
service by the numeric or  P ꕌꕍ  button.
Press the numeric or  P ꕌꕍ  button to select a certain 
service which broadcasts digital teletext.
Press  the  TEXT  or  coloured  button  to  switch  on  tele -
text.
Follow  the  indications  on  digital  teletext  and  move 
onto  the  next  step  by  pressing  OK, ꕌꕍ<  >  ,  RED, 
GREEN,  YELLOW,  BLUE  or  NUMBER   buttons  and 
so on. 
Press  the  TEXT  or  colour  button  to  switch  off  digital 
teletext and return to  TV viewing.
Some services may allow you to access text services 
by pressing the  RED button.1
1
2
2
3
3
4
 
						

							137
APPENDIX
APPENDIX
TROUBLESHOOTING
The operation does not work normally.The remote controldoesn’t work
 ■Check to see if there is any object between the product and the remote 
control causing obstruction. Ensure you are pointing the remote control 
directly at the set.
 ■Ensure that the batteries are installed with correct polarity (+ to +, - to -).
 ■Ensure that the correct remote operating mode is set: TV, VCR, etc.
 ■Install new batteries.
Power is suddenly turned off
 ■Is the sleep timer set?
 ■Check the power control settings. Power interrupted.
 ■If  the  TV  is  switched  on  and  there  is  no  input  signal,  it  will  switch  off 
automatically after 15 minutes to save the power consumption.
 ■When a broken file was played in the USB mode, the TV may turn off. 
Please check the file in your usb storage.
 ■Except the screen off mode of the energy saving menu.
The video function does not work.
No picture &No sound
 ■Check whether the product is turned on.
 ■Try another channel. The problem may be with the broadcast.
 ■Is the power cord inserted into wall power outlet?
 ■Check your antenna direction and/or location.
 ■Test  the  wall  power  outlet,  plug  another  product’s  power  cord  into  the 
outlet where the product’s power cord was plugged in.
Picture appears slowly after switching on
 ■This is normal, the image is muted during the product startup process. 
Please  contact  your  service  centre,  if  the  picture  has  not  appeared 
after five minutes.
No color, poor colour, or poor picture
 ■Adjust Colour in menu option.
 ■Keep a sufficient distance between the product and the VCR.
 ■Try another channel. The problem may be with the broadcast.
 ■Are the video cables installed properly?
 ■Activate any function to restore the brightness of the picture.
Horizontal / vertical bars or picture shaking
 ■Check  for  local  interference  such  as  an  electrical  appliance  or  power 
tool.
   
						

							138
APPENDIX
APPENDIX
The audio function does not work.Picture OK & No sound
 ■Press the   + or - button.
 ■ Sound muted? Press MUTE button.
 ■Try another channel. The problem may be with the broadcast.
 ■Are the audio cables installed properly?
No output from one of the speakers
 ■ Adjust Balance in menu option.
Unusual sound from inside the product
 ■ A change in ambient humidity or temperature may result in an unusual 
noise  when  the  product  is  turned  on  or  off  and  does  not  indicate  a 
problem with the product.
No sound when
connecting HDMI or USB
 ■Check HDMI cable is High Speed HDMI Cable.
 ■Check USB cable over version 2.0.
 ■If  the  sound  is  abnormal  in  the  HDMI,  check  the  audio  format  in  your 
external equipments
 ► Audio Supported format : Dolby Digital, PCM
The video function does not work.
Poor reception onsome channels
 ■ Station  or  cable  product  experiencing  problems,  tune  to  another  sta -
tion.
 ■ Station signal is weak, reorient antenna to receive weaker station.
 ■Check for sources of possible interference.
Lines or streaks in pictures
 ■Check antenna (Change the direction of the antenna).
No picture
when connecting HDMI
 ■ Check that your HDMI cable is High Speed HDMI Cable. 
If  the  HDMI  cables  are  not  High  Speed  HDMI  Cable,  flickering  or  no 
screen display can result. Please use the High Speed HDMI Cable.
 
						

							139
APPENDIX
No image is displayed.Power is on, power indictor is blue but the screen
appears extremely dark.
 ■ Adjust brightness and contrast again.
Does the ‘Invalid format’ message appear?
 ■The signal from the PC (Video card) is out of the vertical or horizontal 
frequency range of the product.
Adjust  the  frequency  range  by  referring  to  the  Specifications  in  this 
user’s guide.
Does the ‘Check signal
cable’ message appear?
 ■ The signal cable between PC and product is not connected. Check the 
signal cable.
 ■Press  the  ‘ INPUT’  button  in  the  remote  control  to  check  the  input  sig -
nal.
Only PC mode applied
There is a problem with PICTURE settings.
When the user changesthe picture settings, the
TV automatically converts back to the initial settings after a certain period of time.
 ■It means that the TV is currently set to  Store Demo mode.
To switch to Home use mode you should do the followings:
From  the  TV  Menu,  choose  OPTION  →  Choose  Mode  Setting  → 
Choose  Home use . Now, you have completed switching to the Home 
use mode.
‘Unknown Product’ message appears when the product is connected.
Did you install the driver?
 ■ Install the product driver, which is provided with the product, or down -
load it from the web site. (http://www.lg.com)
 ■ See  if  the  plug  &  play  function  is  supported  by  referring  to  the  video 
card user’s guide.
After-image appears on the product.
After-image appears when the product is turned off.
 ■ If  you  use  a  fixed  image  for  a  long  time,  the  pixels  may  be  damaged 
quickly.
Use the screen saver function.
   
						

							140
APPENDIX
APPENDIX
Screen color is abnormal.Screen has poor color res- oluion (16_colors).
 ■Set screen color resolution to more than 24 bits (true color)
Select  control  Pane  →  Display  →  Settings  →  Color  Table  menu  in 
Windows.
Screen color is unstable or mono color.
 ■Check the connection status of the signal cable.
Do back spots appear on the screen?
 ■Several  pixels  (red,  green,  white  or  black  color)  may  appear  on  the 
screen,  which  can  be  attributable  to  the  unique  characteristics  of  the 
LCD panel. 
It is not a malfunction of the LCD.
The screen image looks abnormal.
Is the screen position wrong?
 ■Adjust the Position menu in OSD.
 ■A See if the video card resolution and frequency are supported by the 
product. If the frequency is out of range, set to the recommended reso -
lution in the Control Panel  → Display  → Setting menu.
Do thin lines appear on
the background screen?
 ■ Adjust the  Clock menu in OSD.
Horizontal noise appears or the characters look blurred.
 ■Adjust the  Phase menu in OSD.