LG Flatron M2080d Owners Manual

							151
APPENDIX
12. Remote control lock mode (Command: k m)
 ►To  lock  the  front  panel  controls  on  the  monitor  and 
remote control.
Transmission
[k][m][  ][Set ID][  ][Data][Cr]
Ack
Data 00  : Lock off 01 : Lock on
* If you are not using the remote control, use this  mode.
 When main power is on/off, external control lock is released.
* Local Power Key will work properly.
[m][  ][Set ID][  ][OK/NG][Data][x]
11. OSD Select (
Command: k l)
 ►To select OSD (On Screen Display) on/off when control-
ling remotely.
Transmission
[k][l][  ][Set ID][  ][Data][Cr]
Ack
 Data 00 : OSD off 01 : OSD on
[l][  ][Set ID][  ][OK/NG][Data][x]
09. Tint ( Command: k  j)
 ►To adjust the screen tint. (Except PC mode)
 You can also adjust tint in the PICTURE menu.
Transmission
Data Red : 00 to Green : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][j][  ][Set ID][  ][Data][Cr]
Ack
[j][  ][Set ID][  ][OK/NG][Data][x]
 ►
To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
Transmission
10. Sharpness (Command: k k)
Data Min : 00 to Max : 64 * 
Refer to ‘Real data mapping 1’. See page 153.
[k][k][  ][Set ID][  ][Data][Cr]
Ack
[k][  ][Set ID][  ][OK/NG][Data][x]
14. Bass (Command: k s)
 ►
To adjust bass.   You can also adjust bass in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][s][  ][Set ID][  ][Data][Cr]
Ack
[s][  ][Set ID][  ][OK/NG][Data][x]
13. Treble (Command: k r)
 ►
To adjust treble.  You can also adjust treble in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][r][  ][Set ID][  ][Data][Cr]
Ack
[r][  ][Set ID][  ][OK/NG][Data][x]
08. Colour (
Command: k  i)
 ►To adjust the screen colour. (Except PC mode) You can also adjust colour in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][i][  ][Set ID][  ][Data][Cr]
Ack
[i][  ][Set ID][  ][OK/NG][Data][x]
07. Brightness (
Command: k h)
 ►To adjust screen brightness. You can also adjust brightness in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][h][  ][Set ID][  ][Data][Cr]
Ack
[h][  ][Set ID][  ][OK/NG][Data][x]
   
						

							152
APPENDIX
APPENDIX
15. Balance (Command: k t)
 ►To adjust balance. You can also adjust balance in the AUDIO menu.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][t][  ][Set ID][  ][Data][Cr]
Ack
[t][  ][Set ID][  ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
 ► To adjust colour temperature. You can also adjust Colour 
Temperature in the PICTURE menu.
Transmission
Data  Min  : 00  to  Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[x][u][  ][Set ID][  ][Data][Cr]
Ack
[u][  ][Set ID][  ][OK/NG][Data][x] 18. Auto Configure(Command: j u)
 ►
To  adjust  picture  position  and  minimize  image  shaking 
automatically. It works only in RGB (PC) mode.
Transmission
Data 01: To set
[j][u][  ][Set ID][  ][Data][Cr]
Ack
Ack
[u][  ][Set ID][  ][OK/NG][Data][x]
[q][ ][Set ID][ ][OK/NG][Data][x]
17. Energy Saving (Command: j q)
 ►
To  reduce  the  power  consumption  of  the  TV.  You 
can also adjust Energy Saving in OPTION menu.
Transmission
[j][q][  ][Set ID][  ][Data][Cr]
Power Saving 
FunctionLevel Description
7 654 3210
0 000 Low Power 0000 Off
0 000 Low Power 0001 Minimum
0 000 Low Power 0010 Medium
0 000 Low Power 0011 Maximum
0 000 Low Power 0101 Screen Off
19.Tune Command (Command: m a)
 ►Select channel to following physical number.
Transmission
Data00 : High  channel dataData01 : Low channel data ex. No. 47 -> 00 2F (2FH)   No. 394 -> 01 8A (18AH),    DTV  No. 0 -> Don’t careData02 : 0x00  : Analogue Main     0x10 : DTV Main     0x20 : Radio
Channel data range
 Analogue - Min: 00  to Max: 63 (0  to 99)
 Digital - Min: 00  to Max: 3E7 (0  to 999)
(Except  For  Sweden,  Finland,  Norway,  Denmark, 
Ireland)
 Digital - Min: 00  to Max: 270F (0  to 9999)
(Only Sweden, Finland, Norway, Denmark, Ireland)
[m][a][  ][Set ID][  ][Data0][  ][Data1][  ][Data2][Cr]
Ack
[a][  ][Set ID][  ][OK/NG][Data][x]
Data Min: 00 to  Max: 7DH
 
						

							153
APPENDIX
23. Input select (Command: x b)
  (Main Picture Input)
 ►To select input source for main picture.
Transmission
Data Structure
[x][b][  ][Set ID][  ][Data][Cr]
22. Back Light (Command: m g)
 ►
To Control the back light.
Transmission
[m][g][  ][Set ID][  ][Data][Cr]
Ack
[g][  ][Set ID][  ][OK/NG][Data][x]
Ack
[b][  ][Set ID][  ][OK/NG][Data][x]
Data : data Min: 00 to Max: 64
21. Key(Command: m c)
 ► To send IR remote key code.
Transmission
Data Key code - Refer to page 148.
[m][c][  ][Set ID][  ][Data][Cr]
Ack
[c][  ][Set ID][  ][OK/NG][Data][x]
20. Programme Add/Skip(Command: m b)
 ►
To set skip status for the current Programme.
Transmission
 Data 00 : Skip            01 : Add
[m][b][  ][Set ID][  ][Data][Cr]
Ack
[b][  ][Set ID][  ][OK/NG][Data][x]
*  Real data mapping 1
00 : Step 0 Tint
Step 0 : R50
A : Step 10 (Set ID 10)
Step 49 : R1
F : Step 15 (Set ID 15) Step 50 :   0
10 : Step 16 (Set ID 16) Step 51 : G1
64 :Step 100 Step 100 : G50
6E :Step 110 Balance
Step 0 : L50
73 : Step 115
74 :Step 116 Step 49 : L1
Step 50 : 0
CF : Step 199 Step 51 : R1
FE :Step 254 Step 100 : R50
FF : Step 255
Colour TemperatureStep 0 : W50
Step 49 : W1
Step 50 : 0
Step 51 : C1
Step 100 : C50
Data 00: DTV 40: Component
10: Analogue 60: RGB
20: AV 90: HDMI
   
						

							UK Only
 
						

							         
Make \bure to read the Safety \frecaution\b before
u\bing the product.
Keep  the  Owner ’\b  Manual  (CD)  in  an  acce\b\bible 
place for future reference.
The  model  and  \berial  number  of  the  SET  i\b 
located  on  the  back  and  one  \bide  of  the  SET. 
Record it below \bhould you ever need \bervice.
MO\fEL
SERIAL