LG Flatron M2080d Owners Manual

							41
WATCHING  TV  /  PROGRAMME  CONTROL
VOLUME UP/DOWNFAV
MARK
RATIO MUTE
Programme UP/DOWN
PAGE
UP/DOWN
TELETEXTBUTTONS
SUBTITLE
USB Menu control
buttons
Auto Config. Adjusts the volume.
Displays the selected favourite programme. 
(► P. 63)
Check and un-check programmes in the USB menu.
Selects your desired Aspect Ratio of picture.
Switches the sound on or off.
Selects a programme.
Move  from  one  full  set  of  screen  information  to  the 
next one.
These buttons are used for teletext.
For further details, see the ‘Teletext’ section. 
(► P. 134 to 135)
Recalls your preferred subtitle in digital mode.
USB menu(Photo List and Music List or Movie List ).
Automatically  adjusts  picture  position  and  mini -
mizes image instability.
1
1
Installing Batteries
 ■ Open  the  battery  compartment  cover  on  the  back  side  and 
install the batteries matching correct polarity  (
+with +, -with - )
 ■
Install two 1.5 V AAA batteries. Don’t mix old or used batteries 
with new ones.
 ■Close cover.
 ■To  remove  the  batteries,  perform  the  installation  actions  in 
reverse.
   
						

							42
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
TURNING ON THE TV
 -When your TV is turned on, you will be able to use its features.
PROGRAMME SELECTION
VOLUME ADJUSTMENT
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
In  standby  mode  to  turn  TV  on,  press  the 
  /  I,  INPUT   or Pꕌꕍ   button  on  the  TV  or  press  the 
POWER, INPUT,  Pꕌꕍor NUMBER button on the remote control and the TV will switch on.            
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
Language,  Mode  Setting,  Country   or Set  Password   (When  France  is  selected  for  Country),  Auto 
Tuning.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the BACK button to change the current OSD to the previous OSD.
c.  For  those  countries  without  confirmed  DTV  broadcasting  standards,  some  DTV  features  might  not  work, 
depending on the DTV broadcasting environment.
d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, “Store  Demo” mode initializes the product to the image quality set by us after a certain period of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION menu.
g. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’.
Press the  P ꕌꕍ  or NUMBER button s to select a programme number.
Press the 
 + or - button to adjust the volume.
If you wish to switch the sound off, press the  MUTE button.
You can cancel this function by pressing the  MUTE, 
 + , - button.
1
2
1
1
2
 
						

							43
WATCHING  TV  /  PROGRAMME  CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
ꔣ  Aspect Ratio : Selects your desired picture for -
mat.For Zoom Setting, select 14:9, Zoom and 
Cinema Zoom in Ratio Menu. After completing 
Zoom Setting, the display goes back to Q.Menu. 
ꔩ Backlight : Adjusts the brightness of the screen 
by controlling the LCD backlight.
ꕇ  Picture Mode : Selects your desired Picture 
Mode. ꕈ 
Sound Mode : It is a feature to automatically set 
the sound combination which it deems the best 
for the images being watched. Selects your 
desired Sound Mode.
ꔴ  Audio : Selects the sound output. 
ꔤ  Sleep Timer : Sets the sleep timer.
ꔲ  Favourite: Selects the favourite programme.
ꔢ  USB Device: Selects “Eject” in order to eject 
USB  device.
 ◄        Aspect Ratio           ►
1
2
3
Display each menu.
Select your desired Source.
• Press the  BACK button to move to the previous menu screen.
16:9
   
						

							44
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual.
SETUP
SETUPMoveMove
Move
OK OK
OK
OPTIONPICTURE
PICTURE
LOCK AUDIO
AUDIO
 TIME
USB
INPUT
LOCK
OPTION
INPUT
TIME
USB
Move OK
Move MoveMove Move
OK OKOK
OK
Auto Tuning
Manual Tuning
Programme Edit
Software Update    : ON
Diagnostics
CI Information
Menu Language  : English
Audio Language  : English
Subtitle Language   : English
Disabled Assistance
Country   :   - -
Input Label
Set ID  : 1
Power Indicator  : On
▼
Set Password
Lock System  :  Off
 • Block Programme
 •  Parental Guidance
 • Input Block 
Key Lock : Off
Antenna
AV1
AV2
Component
RGB
HDMI1
HDMI2 Photo List
Music List
Movie List
DivX Reg. Code
Deactivation
Aspect Ratio  : 
16:9
Picture Wizard
ꕊ
 Energy Saving  : Off
Picture Mode  :  Vivid
 •  Backlight    10 0
 • Contrast  10 0
 • Brightness  50
 • Sharpness  70
▼
Auto Volume  : Off
Clear Voice II  : Off ꕅ 3
Balance   0
Sound Mode  :  Music
 •  Surround X           : Off
 • Treble  50
 • Bass  50
 • Reset
▼
Clock
Off Time  : Off
On Time  :  Off
Sleep Timer  : OffAutomatic Standby : 4 hours
1
2
3
MENU
Select a menu item.
Display each menu.
Move to the pop up menu.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
NOTE
 ►It is not possible to use  CI Information in Analogue mode.
!
 
 
						

							45
WATCHING  TV  /  PROGRAMME  CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The  maximum  number  of  programmes  that  can  be  stored  is  1000.  But  the  number  may  differ  slightly 
depending on broadcasting signals.
(For countries other than Finland, Sweden, Denmark and Norway)
SETUPSETUPMoveMove
OK OK
Auto Tuning
Manual Tuning
Programme Edit
Software Update   :  ON
Diagnostics
CI Information
Auto Tuning
Manual Tuning
Programme Edit
Software Update  
 :  ON
Diagnostics
CI Information
1
2
4 3
MENU
Select Auto Tuning.
Select  Antenna.
Select 
SETUP.
Run  Auto tuning.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Auto Tuning     ꔉ Auto Tuning    ꔉ 
➩ ➩
• Use NUMBER   buttons  to  input  a  4-digit 
password in  Lock System ‘On’ .
• If you wish to keep on auto tuning select 
Start using the ꕌꕍ button. Then, press 
the  OK button . Otherwise select  Close.
• Automatic  Numbering:  Decide  wheth -
er  to  use  the  programme  numbers  as 
sent by broadcasting stations for tuning.
• When select  Italy in the County menu, if 
the  pop  up  is  displayed  when  the  con -
flicted  Programme  after  Auto  Tuning, 
select  a  broadcaster  for  conflicting  pro -
gramme number to solve.
Check your antenna connection.
The previous channel information will 
be updated during Auto Tuning.
□ SECAM L Search
□ Automatic Numbering
Start
Close
   
						

							46
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
If you want to select the Antenna,
AUTO PROGRAMME TUNING
DVB-C Auto Tuning is a menu for users in countries that support DVB cable.
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
SETUPSETUP
Auto Tuning
Manual Tuning
Programme Edit
Software Update   :  ON
Diagnostics
CI Information
Auto Tuning
Manual Tuning
Programme Edit
Software Update  
 :  ON
Diagnostics
CI Information
1
2
4
5 3
MENU
Select Auto Tuning.
Select  Start.
Select 
Antenna.
Select 
SETUP.
(Only for  Finland, Sweden, Denmark and Norway )
Run Auto tuning.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Auto Tuning     ꔉ Auto Tuning    ꔉ Please select your TV Connection.
AntennaCable
Close
➩ ➩
• Use NUMBER   buttons  to  input  a  4-digit 
password in  Lock System ‘On’ .
• If you wish to keep on auto tuning select 
Start  using  the ꕌꕍbutton.  Then,  press 
the  OK button . Other wise select  Close.
• Automatic  Numbering:  Decide  wheth -
er  to  use  the  programme  numbers  as 
sent by broadcasting stations for tuning.
MoveOKMoveOK
Check your antenna connection.
The previous channel information will 
be updated during Auto Tuning.
□ SECAM L Search
□ Automatic Numbering
Start
Close
 
						

							47
WATCHING  TV  /  PROGRAMME  CONTROL
SETUP
SETUPSETUP
SETUP
Move
Move Move
Move
OK
OK OK
OK
Auto Tuning
Manual Tuning
Programme Edit
Software Update   :  ON
Diagnostics
CI Information
Auto Tuning
Manual Tuning
Programme Edit
Software Update    :  ON
Diagnostics
CI Information Auto Tuning
Manual Tuning
Programme Edit
Software Update  
 :  ON
Diagnostics
CI Information Auto Tuning
Manual Tuning
Programme Edit
Software Update  
 :  ON
Diagnostics
CI Information
If you want to select the Cable,
Auto Tuning     ꔉ 
Auto Tuning    ꔉ 
Auto Tuning    ꔉ Auto Tuning    ꔉ Please select your TV Connection.
AntennaCable
Close
➩ ➩
➩ ➩
OK
Close
640AM
362000
0
6875
◄             Default             ►
Frequency(kHz)
Symbol rate(kS/s)
Modulation
Network ID
1
2
8
9
5
6 4 7
3
MENU
Select Auto Tuning. Select Start.
Run  Auto tuning.
Make appropriate adjust -
ments.  (Except  for  Full 
mode) Select 
Close.
Select  Cable.
Select  Comhem  or  Other 
Operators.
Select  Default, Full  or User
Select 
SETUP.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Check your antenna connection.
The previous channel information will 
be updated during Auto Tuning.
□ SECAM L Search
Start
Close
Comhem               ꔉ 
Other Operators
Next
Previous
Service Operator
• Use 
NUMBER   buttons  to  input  a  4-digit 
password in  Lock System ‘On’ .
• If you wish to keep on auto tuning select 
Start using the ꕌꕍ button. Then, press 
the  OK button . Other wise select  Close.
• Automatic  Numbering:  Decide  wheth -
er  to  use  the  programme  numbers  as 
sent by broadcasting stations for tuning.
 ■ The image shown may be somewhat different from your set.
   
						

							48
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
The following values are needed in order to search all available programmes quickly and correctly.
The commonly used values are provided as "default".
However, for correct settings, please inquire of the cable service provider.
When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find avail-
able channels.
In the case when the programme is not searched by selecting the Default, perform the searching by select -
ing the Full.
However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be 
taken too much.
• Frequency : Enter a user-defined frequency range.
• Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem 
sends symbols to a channel).
• Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier).
• Network ID: Unique identifier allocated for each user. 
• Acquired certification SO: Sweden(Comhem), Denmark(YouSee, Stofa).
• If there are not any Service Operator that you want, select  Other Operators.
• If you select "Other Operators", or the selected country supports "Other Operators" only, it may take some 
time to search all the channels, or it may not search some of the channels.
If some of the channels do not appear, follow the steps below.
1.  SETUP → Auto Tuning → Cable
2. Input additional values such as the frequency, symbol rate, modulation, and network ID
(You can ask your cable service provider for the above information
• When you select the  Cable, the Cable Service Operator  selection screen can differ or not exist by the 
Cable situation of the applicable country
• The popup window to select between  Service Operator is only shown initially for the 3 cases when you 
accessing the  Initial Setting menu, when you change from  Antenna to Cable  or when you access the 
menu after changing the  Country.
• When you want to select between  Service Operator aside from the above 3 cases, you can do so by 
selecting  SETUP → Cable DTV Setting → Service Operator.
 
						

							49
WATCHING  TV  /  PROGRAMME  CONTROL
To  watch  DVB-C  in  the  countries  excluding  Finland,  Sweden,  Denmark  and  Norway  select  '-  -'  as  the 
Country in OPTION.
You can select User mode or  Full mode in  Auto Tuning.
The corresponding home frequency information may need to be changed when tuning the  User mode, and 
the corresponding information depends on the Cable Service Operator (SO) in service.
During  Full mode tuning, some channel may be restricted for some Cable Service Operator (SO), and it may 
take a long time for tuning.
Note
 ► Your cable provider may charge for their services, or require you to agree to its items and conditions of business.
 ►DVB-C Cable may not operate correctly with some cable providers.
 ►Compatibility with DVB-C digital cable broadcasts is not guaranteed.
AUTO PROGRAMME TUNING
If you select the “- -” of Country Setting, (Except for Finland, Sweden, 
Denmark and Norway)
NOTE
 ►M**80D/DF/DB/DN-PYM does not support DVB-C. (Check the model name on the label on the 
back of the product.)
!
   
						

							50
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
CABLE DTV SETTING (IN CABLE MODE ONLY)
The  range  that  a  user  can  select  from  the  Service  Operator  menu  differs  depending  on  number  of  Service 
Operator supported by each country, and if number of supported Service Operator for each country is 1, cor-
responding function becomes non-activation.
After changing Service Operator, a warning window saying that channel map will be deleted when  OK button 
is pressed or Close is selected, and a Auto-tuning pop-up window appears when  'YES' is selected.
SETUPSETUP
Auto Tuning
Manual Tuning
Programme Edit
Software Update    :  ON
Diagnostics
CI Information
Cable DTV Sttiing
Auto Tuning
Manual Tuning
Programme Edit
Software Update  
 :  ON
Diagnostics
CI Information
Cable DTV Sttiing
1
2
4 3
MENU
Select Cable DTV Setting.
Select your desired source. Select 
Service  Operator  or 
Channel Auto Update. Select  SETUP.
• Press the  MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Cable DTV Settiing   ꔉ Cable DTV Settiing   ꔉ 
➩
• If  you  select  Cable,  you  can  see  Cable 
DTV Setting menu.
• When  Channel  Auto  Update  in  On,  the 
channel  information  will  be  automatically 
updated whenever the network information 
changes.
• When  Channel  Auto  Update  is  Off,  the 
channel information will not be updated.
MoveOKMoveOK
◄  Comhem  ►
On
Service Operator
Channel Auto Update
Close