LG Flatron M2080d Owners Manual

							31
EXTERNAL  EQUIPMENT  SETUP
USB SETUP
Connect the USB device to the USB IN jacks on the side of SET.
After connecting the  USB IN jacks, you use the  USB function. (► p.113)1
2
Memory StickUSB Cable
   
						

							32
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
HEADPHONE SETUP
Plug the headphone into the headphone socket. 
To adjust the  headphone volume , press the 
 + or - button. If you press the  MUTE button, the 
sound from the headphone is switched off.
1
2
You can listen the sound through the headphone.
NOTE
 ►  AUDIO menu items are disabled when connecting a headphone.
 ► Optical Digital Audio Out is not available when connecting a headphone.
!
 
						

							33
EXTERNAL  EQUIPMENT  SETUP
OPTICALDIGITAL
AUDIO OUT
ANTENNA / CABLE IN
USB IN
VIDEO
YP
BPRLR AUDIO
AUDIO
IN
(RGB/DVI)H / P
COMPONENT IN
VIDEO(MONO)  L  -  AUDIO  -  R
AV IN2
LRVIDEO
Connect the  AUDIO / VIDEO  jacks between SET and external equipment. Match the jack colours.
(Video = yellow, Audio Left = white, and Audio Right = red)
Select  AV2 input source with using the  INPUT button on the remote control.
Operate the corresponding external equipment.
Refer to external equipment operating guide.1
2
3
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
1
   
						

							34
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
PC SETUP
When using the remote control, aim it at the remote control sensor on the SET.
When connecting with a D-sub 15 pin cable
Connect the signal cable from the monitor output socket 
of the PERSONAL COMPUTER  to the PC inpu t socket 
of the SET.
Connect the audio cable from the  PC to the  AUDIO IN
(RGB/DVI)  sockets of the SET.
Press the  INPUT button to select  RGB.
Switch on the  PC, and the  PC screen appears on the set.
The set can be operated as a PC monitor.1
2
3
41
2
 ► Connect the signal input cable and tighten it up by turning in 
the direction of the arrow as shown in the figure.
NOTE!
 
						

							35
EXTERNAL  EQUIPMENT  SETUP
Connecting with an HDMI to DVI cable
Connect the DVI output of the PC to the HDMI/DVI IN1 
or  HDMI/DVI IN2  jack on the SET.
Connect  the  PC  audio  output  to  the  AUDIO  IN  (RGB/
DVI)  jack on the SET.
Turn on the PC and the SET.
Select  HDMI 1  or HDMI 2  input source using the  INPUT  
button on the remote control.1
2
3
4
12
 ► Connect the signal input cable and tighten it up by turning in 
the direction of the arrow as shown in the figure.
NOTE!
 ►If you want to use HDMI-PC mode, you must set the input label to PC mode.
   
						

							36
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
Connecting with an HDMI to HDMI cable
Connect the HDMI output of the PC to the HDMI/DVI IN1 
or  HDMI/DVI IN2  jack on the SET.
Turn on the PC and the SET.
Select  HDMI 1  or HDMI 2  input source using the  INPUT  
button on the remote control.1
2
3
1
NOTE
 ► Check  that  your  HDMI  cable  is  High  Speed  HDMI  Cable.  If  the  HDMI  cables  are  not  High  Speed HDMI 
Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable.
 ► If you want to use HDMI-PC mode, you must set the input label to PC mode.
!
 
						

							37
EXTERNAL  EQUIPMENT  SETUP
BACK COVER FOR WIRE ARRANGEMENT
Tie cables together with a cable management as shown in the illustration.
M2080D / M2280D
M2380D / M2780DM2080DN / M2280DN
M2380DN / M2780DN M2080DF / M2280DF
M2380DF / M2780DF
M2080DB / M2280DB
M2380DB
   
						

							38
EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
SUPPORTED DISPALY RESOLUTION
HDMI/DVI - PC modeRGB[PC] mode
Resolution
Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
640 x 480 31.46959.94
640 x 480 37.575
800 x 600 37.87960.317
800 x 600 46.875 75
832 x 624 49.72564.55
1024 x 768 48.36360
1024 x 768 60.02375.029
1280 x 1024 63.98160.02
1600 x 900 6060
Resolution Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
640 x 480 31.46959.94
640 x 480 37.575
800 x 600 37.87960.317
800 x 600 46.875 75
832 x 624 49.72564.55
1024 x 768 48.36360
1024 x 768 60.02375.029
1152  x 870 68.68175.062
1280 x 1024 63.98160.02
1600 x 900 6060Resolution Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
720 x 400 31.46870.08
640 x 480 31.46959.94
640 x 480 37.575
800 x 600 37.87960.317
800 x 600 46.87575.0
1024 x 768 48.36360.0
1024 x 768 60.02375.029
1152 x 864 67.50075.000
1280 x 1024 63.98160.02
1280 x 1024 79.97675.025
1680 x 1050 64.67459.883
1680 x 1050 65.29059.954
1600 x 1200 75.060.0
1920 x 1080 67.560
Resolution Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
720 x 400 31.46870.08
640 x 480 31.46959.94
640 x 480 37.575
800 x 600 37.87960.317
800 x 600 46.87575.0
1024 x 768 48.36360.0
1024 x 768 60.02375.029
1152 x 864 67.50075.000
1280 x 1024 63.98160.02
1280 x 1024 79.97675.025
1680 x 1050 64.67459.883
1680 x 1050 65.29059.954
1600 x 1200 75.060.0
1920 x 1080 67.560
M2080D / M2080DF / M2080DB / M2080DN
M2080D / M2080DF / M2080DB / M2080DN M2280D  /  M2380D  /  M2780D  /  M2280DF  /
M2380DF / M2780DF / M2280DB / M2380DB / 
M2280DN / M2380DN / M2780DN
M2280D  /  M2380D  /  M2780D  /  M2280DF  /
M2380DF / M2780DF / M2280DB / M2380DB / 
M2280DN / M2380DN / M2780DN
 
						

							39
EXTERNAL  EQUIPMENT  SETUP
HDMI/DVI - DTV modeComponent mode
ResolutionHorizontal
Frequency(kHz) Vertical
Frequency(Hz)
720 x 480 31.469
31.5 59.94
60
720 x 576 31.2550
1280 x 720 37.50050
1280 x 720 44.96
45 59.94
60
1920 x 1080 33.72
33.7559.94
60
1920 x 1080 28.12550.00
1920 x 1080 2724
1920 x 1080 33.7530.00
1920 x 1080 56.25050
1920 x 1080 67.43
67.5 59.94
60Resolution Horizontal
Frequency(kHz) Vertical
Frequency(Hz)
720 x 480 15.7359.94
720 x 480 15.7560.00
720 x 576 15.62550.00
720 x 480 31.4759.94
720 x 480 31.5060.00
720 x 576 31.2550.00
1280 x 720 44.9659.94
1280 x 720 45.0060.00
1280 x 720 37.5050.00
1920 x 1080 33.7259.94
1920 x 1080 33.7560.00
1920 x 1080 28.12550.00
1920 x 1080 56.2550
1920 x 1080 67.43259.94
1920 x 1080 67.560.00
NOTE
 ►Avoid keeping a fixed image on the set’s screen 
for  prolonged  periods  of  time.  The  fixed  image 
may  become  permanently  imprinted  on  the 
screen use a screen saver when possible.
 ► There  may  be  interference  relating  to  resolution, 
vertical  pattern,  contrast  or  brightness  in  PC 
mode. Change the PC mode to another resolution 
or change the refresh rate to another rate or adjust 
the  brightness  and  contrast  on  the  menu  until  the 
picture is clear. If the refresh rate of the PC graph-
ic  card  can  not  be  changed,  change  the  PC 
graphic card or consult the manufacturer of the PC 
graphic card. 
 ►The synchronization input waveform for Horizontal 
and Vertical frequencies are separate.
 ►Connect  the  signal  cable  from  the  monitor  output 
port of the PC to the RGB (PC) port of the SET or 
the  signal  cable  from  the  HDMI  output  port  of  the 
PC to the HDMI/DVI IN port on the SET.
 ►Connect the audio cable from the PC to the Audio 
input  on  the  SET.  (Audio  cables  are  not  included 
with the SET).
 ►If  using  a  sound  card,  adjust  PC  sound  as 
required.
 ►If the graphic card on the PC does not output ana -
logue  and  digital  RGB  simultaneously,  connect 
only one of either RGB or HDMI/DVI IN to display 
the PC output on the SET.
 ► If  the  graphic  card  on  the  PC  does  output  ana -
logue and digital RGB simultaneously, set the SET 
to either RGB or HDMI. (The other mode is set to 
Plug and Play automatically by the SET.)
 ► DOS mode may not work depending on the video 
card if you use an HDMI to DVI cable. 
 ►If  you  use  too  long  an  RGB-PC  cable  that  is  too 
long, there may be interference on the screen. We 
recommend  using  under  5m  of  cable.  This  pro -
vides the best picture quality.
!
   
						

							40
WATCHING TV / PROGRAMME CONTROL
WATCHING  TV  /  PROGRAMME  CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the set.
ꔰ (POWER)
ENERGY SAVING
TV/PC 
INPUT
TV/RAD Switches the set on from standby or off to standby. Adjust the Energy Saving mode of the SET.
(► P. 72)
Selects TV or PC mode.
External input mode rotates in regular sequence. 
Selects Radio, TV and DTV channel.
0~9  number
button
LIST
Q.VIEW
MENU
GUIDE
Q. MENU
THUMBSTICK
(Up/Down/Left/Right)
OK
BACK
꘍
EXIT Selects a programme.
Selects numbered items in a menu.
Displays the programme table. (► P. 62)
Returns to the previously viewed programme.
Selects a menu.
Clears  all  on-screen  displays  and  returns  to  TV 
viewing from any menu. (► P. 44)
Shows programme schedule. (► P. 65 to 68)
Select  the  desired  quick  menu  source.  (Aspect 
Ratio,  Clear  Voice  II  ,  Picture  Mode,  Sound  Mode, 
Audio, Sleep Timer, Favourite, USB Device). (►P.43)
Allows  you  to  navigate  the  on-screen  menus  and 
adjust the system settings to your preference.
Accepts your selection or displays the current mode.
Allows the user to move return one step in an inter -
active  application,  EPG  or  other  user  interaction 
function.
Shows the present screen information.
Clears  all  on-screen  displays  and  returns  to  TV 
viewing from any menu
Coloured
buttons These buttons are used for teletext (on TELETEXT
models only) , Programme edit.