LG Flatron M2080d Owners Manual
Have a look at the manual LG Flatron M2080d Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
141 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new set. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on. ■To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. ■Do not to use a wet cloth.. Cleaning the Screen Cleaning the Cabinet Extended Absence 1 2 ► If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges. WARNING
142 APPENDIX APPENDIX ■The specifications shown above may be changed without prior notice for quality improvement. PRODUCT SPECIFICATIONS M2080D / M2080DF / M2080DB / M2080DN LCD Panel S c r e e n Ty p e 508.5 mm Wide (20.0 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 508.5 mm P i x e l P i t c h0.2766 mm (H) x 0.2766 mm (V) Video SignalMax. Resolution 1600 x 900 @ 60 Hz Recommended Resolution1600 x 900 @ 60 Hz Horizontal Frequency30 kHz to 65 kHz Vertical Frequency56 Hz to 75 Hz Synchronization TypeSeparate Sync, Digital Input ConnectorTV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS Power R a t e d Vo l t a g e 19 V 2.0 A Power ConsumptionOn Mode 32 W (typ.) Off Mode ≤ 1 W AC/DC Adapter Manufacturer: LITE-ON, Model PA-1650-68 TiltTi l t R a n g e-5° to 10° Dimensions (Width x Height x Depth) Weight M2080D 476.4 mm x 376.1 mm x 193.8 mm (18.75 inch x 14.81 inch x 7.62 inch) 3.5 kg ( 7.12 lb) M2080DF 476.4 mm x 387.8 mm x 193.9 mm (18.75 inch x 15.26 inch x 7.63 inch) 3.7 kg ( 8.16 lb) M2080DB 476.4 mm x 389.4 mm x 194.4 mm (18.75 inch x 15.33 inch x 7.65 inch) 3.5 kg ( 7.12 lb) M2080DN 476.4 mm x 310.5 mm x 56.1 mm (18.75 inch x 12.22 inch x 2.21 inch) 2.7 kg ( 5.95 lb) Environmental conditionsOperating Temperature Operating Humidity 10 °C to 35 °C 20 % to 80 % -10 °C to 60 °C 5 % to 90 % Storage Temperature Storage Humidity
143 APPENDIX M2280D / M2280DF / M2280DB / M2280DN LCD PanelS c r e e n Ty p e 546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 546.86 mm P i x e l P i t c h0.248 mm (H) x 0.248 mm (V) Video SignalMax. Resolution 1920 x 1080 @ 60 Hz Recommended Resolution1920 x 1080 @ 60 Hz Horizontal Frequency30 kHz to 83 kHz Vertical Frequency56 Hz to 75 Hz Synchronization TypeSeparate Sync, Digital Input ConnectorTV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS Power R a t e d Vo l t a g e 19 V 2.2 A Power ConsumptionOn Mode 35 W (typ.) Off Mode ≤ 1 W AC/DC Adapter Manufacturer: LITE-ON, Model PA-1650-68 TiltTi l t R a n g e-5° to 10° Dimensions (Width x Height x Depth) Weight M2280D 509.6 mm x 396.2 mm x 193.8 mm (20.06 inch x 15.6 inch x 7.63 inch) 3.7 kg (8.16 lb) M2280DF 509.6 mm x 407.3 mm x 193.9 mm (20.06 inch x 16.03 inch x 7.63 inch) 3.9 kg ( 8.6 lb) M2280DB 509.6 mm x 409.6 mm x 194.4 mm (20.06 inch x 16.12 inch x 7.65 inch) 3.7 kg ( 8.16 lb) M2280DN 509.6 mm x 330.5 mm x 53.6 mm (20.06 inch x 13 inch x 2.11 inch) 2.9 kg ( 6.4 lb) Environmental conditionsOperating Temperature Operating Humidity 10 °C to 35 °C 20 % to 80 % -10 °C to 60 °C 5 % to 90 % Storage Temperature Storage Humidity ■ The specifications shown above may be changed without prior notice for quality improvement.
144 APPENDIX APPENDIX M2380D / M2380DF/ M2380DB / M2380DN LCD PanelS c r e e n Ty p e 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 584.2 mm P i x e l P i t c h0.265 mm (H) x 0.265 mm (V) Video SignalMax. Resolution 1920 x 1080 @ 60 Hz Recommended Resolution1920 x 1080 @ 60 Hz Horizontal Frequency30 kHz to 83 kHz Vertical Frequency56 Hz to 75 Hz Synchronization TypeSeparate Sync, Digital Input ConnectorTV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS Power R a t e d Vo l t a g e 19 V 2.4 A Power ConsumptionOn Mode 40 W (typ.) Off Mode ≤ 1 W AC/DC Adapter Manufacturer: LITE-ON, Model PA-1650-68 TiltTi l t R a n g e-5° to 10° Dimensions (Width x Height x Depth) Weight M2380D 547 mm x 415.7 mm x 193.8 mm (21.53 inch x 16.37 inch x 7.63 inch) 4.2 kg ( 9.26 lb) M2380DF 547 mm x 427.9 mm x 193.9 mm (21.53 inch x 16.85 inch x 7.6 inch) 4.4 kg ( 9.7 lb) M2380DB 547 mm x 429.1 mm x 194.4 mm (21.53 inch x 16.89 inch x 7.65 inch) 4.2 kg ( 9.26 lb) M2380DN 547 mm x 349.6 mm x 57.8 m (21.53 inch x 13.76 inch x 2.27 inch) 3.4 kg ( 7.5 lb) Environmental conditionsOperating Temperature Operating Humidity 10 °C to 35 °C 20 % to 80 % -10 °C to 60 °C 5 % to 90 % Storage Temperature Storage Humidity ■ The specifications shown above may be changed without prior notice for quality improvement.
145 APPENDIX M2780D / M2780DF / M2780DN LCD PanelS c r e e n Ty p e 685.8 mm Wide (27 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 685.8 mm P i x e l P i t c h0.3114 mm (H) x 0.3114 mm (V) Video SignalMax. Resolution 1920 x 1080 @ 60 Hz Recommended Resolution1920 x 1080 @ 60 Hz Horizontal Frequency30 kHz to 83 kHz Vertical Frequency56 Hz to 75 Hz Synchronization TypeSeparate Sync, Digital Input ConnectorTV, D-Sub Analog, SCART, PC Audio In, component, HDMI*2, CVBS Power R a t e d Vo l t a g e 19 V 2.8 A Power ConsumptionOn Mode 47 W (typ.) Off Mode ≤ 1 W AC/DC Adapter Manufacturer: LITE-ON, Model PA-1650-68 TiltTi l t R a n g e-5° to 10° Dimensions (Width x Height x Depth) Weight M2780D 644 mm x 480.6 mm x 222.8 mm (23.53 inch x 18.92 inch x 8.77 inch) 5.8 kg ( 12.79 lb) M2780DF 644 mm x 493.6 mm x 221.7 mm (23.53 inch x 19.43 inch x 8.72 inch) 6.1 kg ( 13.45 lb) M2780DN 644 mm x 407.8 mm x 57.6 mm ( 23.53 inch x 16.05 inch x 2.27 inch) 4.8 kg ( 10.58 lb) Environmental conditionsOperating Temperature Operating Humidity 10 °C to 35 °C 20 % to 80 % -10 °C to 60 °C 5 % to 90 % Storage Temperature Storage Humidity ■ The specifications shown above may be changed without prior notice for quality improvement.
146
APPENDIX
APPENDIX
IR CODES
• This feature is not available for all models.
Code (Hexa) Function Note
95 Energy Saving R/C BUTTON
08 POWER R/C BUTTON (POWER ON/OFF)
50 TV / PC R/C BUTTON
0B INPUT R/C BUTTON
79 RATIO R/C BUTTON
F0 TV/RAD R/C BUTTON
45 Q.MENU R/C BUTTON
43 MENU R/C BUTTON
AB GUIDE R/C BUTTON
40 Up (ꕌ) R/C BUTTON
41 Down (ꕍ) R/C BUTTON
07 Left () R/C BUTTON
44 OK(ꔉ ) R/C BUTTON
28 BACK R/C BUTTON
5B EXIT R/C BUTTON
AA ꘍
R/C BUTTON
02
( + )
R/C BUTTON
03
( - )
R/C BUTTON
1E FAV ( MARK ) R/C BUTTON
09 MUTE R/C BUTTON
00 P (ꕌ)
R/C BUTTON
01 P (ꕍ)
R/C BUTTON
10
to 19 Number Key 0 to 9 R/C BUTTON
53 LIST R/C BUTTON
1A Q.VIEW R/C BUTTON
72 RED Key R/C BUTTON
71 GREEN Key R/C BUTTON
63 YELLOW Key R/C BUTTON
61 BLUE Key R/C BUTTON
20 TEXT R/C BUTTON
21 T.OPT (T.Option) R/C BUTTON
39 SUBTITLE R/C BUTTON
99 Auto Config. R/C BUTTON
B1 ▀ R/C BUTTON
B0 ► R/C BUTTON
BA
l l R/C BUTTON
8F ◄◄ R/C BUTTON
8E ►► R/C BUTTON
147 APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. 15 69 RS-232C Configurations 7-Wire Configurations ( Standard RS-232C cable ) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 R TS D-Sub 9 D-Sub 9 3-Wire Configurations( Not standard ) PC TV RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 7 R TS CTS 8 8 CTS D-Sub 9 D-Sub 9 Type of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD ( Receive data ) TXD ( Transmit data ) DTR ( DTE side ready ) GND DSR ( DCE side ready ) RTS ( Ready to send ) CTS ( Clear to send ) No Connection
148 APPENDIX APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. ► p.153 OPTIONOPTION Menu Language : English Audio Language : English Subtitle Language : English Disabled Assistance Country : - - Input Label Set ID : 1 Power Indicator :On ▼ Menu Language : English Audio Language : English Subtitle Language : English Disabled Assistance Country : - - Input Label Set ID : 1 Power Indicator :On ▼ Move Move OK OK Set ID : 1 ꔉ Set ID : 1 ꔉ ➩ ◄ 1 ► Close 1 2 3 MENU Select Set ID. Adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1 to 99. Select OPTION. • Press the MENU or EXIT button to close the menu window. • Press the BACK button to move to the previous menu screen.
149
APPENDIX
Communication Parameters
■Baud rate: 9600 bps (
UART )
■
Data length: 8 bits
■Parity : None
■Stop bit: 1 bit
■Communication code: ASCII code
■Use a crossed (reverse) cable.
Transmission
*
[Command 1] : F irst command to control the TV.
( j, k, m or x)
* [Command 2] : S econd command to control the TV.
* [Set ID] : You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every con -
nected set is controlled.
Set ID is indicated as decimal (1 to 99) on
menu and as Hexa decimal (0x0 to 0x63)
on transmission/receiving protocol.
*
[DATA] : T o transmit command data.
Transmit ‘FF’ data to read status of com -
mand.
*
[Cr] : C arriage Return
A SCII code ‘0x0D’
* [ ] : A SCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The set transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates pres -
ent status data. If the data is data write mode, it
returns the data of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
Command Reference List
Data 00: Illegal Code
* When setting the 17 to 24, a menu does not appear on screen.
* Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are not exe-
cuted and treated as NG.
COMMAND
1 COMMAND
2 DATA
(Hexadecimal)
01. Power ka
00 to 01
02. Aspect Ratio kcRefer to p. 150
03. Screen Mute kd
00
to 01
04. Volume Mute ke
00
to 01
05. Volume Control kf
00
to 64
06. Contrast kg
00
to 64
07. Brightness kh
00
to 64
08. Colour ki
00
to 64
09. Tint kj
00
to 64
10. Sharpness kk
00
to 64
11. OSD Select kl
00
to 01
12.
Remote control lock modek m
00 to 01
13. Treble kr
00
to 64
14.
Bassk s
00 to 64
15. Balance kt
00
to 64
16.
Colour Temperaturex u
00 to 64
17. Energy Saving jq
00
to 05
18. Auto Configuration ju 01
19. Tune Command maRefer to p. 152
20. Programme Add/Skip mb
00
to 01
21. Key mcKey Code
22. Back Light mg
00
to 64
23. Input select (Main) x bRefer to p. 153
150
APPENDIX
APPENDIX
04. Volume Mute (Command: k e)
►To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
Transmission
Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)
[k][e][ ][Set ID][ ][Data][Cr]
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture Size)
►To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission
Data 01 : Normal screen (4:3) 02 : Wide screen (16:9) 04 : Zoom 06 : Original
07 : 14:9
09 : Just Scan
0B : Full Wide10 to 1F : Cinema Zoom 1 to 16
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50 Hz /
60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz)
mode, Just Scan is available.
* Full Wide is supported only for Analogue, AV1, 2.
[c][ ][Set ID][ ][OK/NG][Data][x] 03. Screen Mute (
Command: k d)
►To select screen mute on/off.
Transmission
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : V ideo mute on
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
[k][d][ ][Set ID][ ][Data][Cr]
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►To adjust volume. You can also adjust volume with the VOLUME but-
tons on remote control.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][f][ ][Set ID][ ][Data][Cr]
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
► To adjust screen contrast. You can also adjust contrast in the PICTURE menu.
Transmission
Data Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 153.
[k][g][ ][Set ID][ ][Data][Cr]
[g][ ][Set ID][ ][OK/NG][Data][x]
01. Power
(Command: k a)
►To control Power On/Off of the set.
Transmission
Data 00 : Power Off 01 : Power On
[k][a][ ][Set ID][ ][Data][Cr]
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
►To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
* Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed
back presents status about each function.
* OK Ack., Error Ack. and other message may dis -
play on the screen when TV is power On.
[a][ ][Set ID][ ][OK/NG][Data][x]
Ack