Lexmark X5650 User Manual

Repeating an image on one page
You can print the same page image multiple times on one sheet of paper. This option is helpful when creating labels,
decals, flyers, handouts, and so on.
1Load paper.
2Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
Adjust the paper guide on...

9Repeat steps 7 and 8 until all the pages that you want to copy have been saved to the printer memory.
10When asked if you want to scan another page, press the arrow buttons until No appears, and then press  to
start printing.
Canceling a copy job
1Press .
Scanning stops and the scanner bar returns to its home position.
2Press  to turn off the printer.
Copying
102
Downloaded From ManualsPrinter.com Manuals 

Faxing
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning
storm.
Sending a fax
Sending a fax using the printer control panel
1Make sure the printer is on and is connected to a working phone line.
2Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small...

Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
Adjust the paper guide on the ADF tray to the width of the original document.
When using the scanner glass, close the top cover to avoid dark edges on the scanned image.
3From the printer control panel, press Dialtone.
You can now hear the dial tone of the telephone line.
Note: The Dialtone button will be active only when the fax...

9If necessary, repeat step 8 and then press  until a maximum of 30 fax numbers have been entered.
10Press  to start scanning the document.
Note: At the designated time, the fax numbers are dialed and the fax is sent to all of the designated fax numbers. If
the fax transmission is unsuccessful to any of the numbers on the broadcast list, then the unsuccessful numbers will
be dialed again.
Receiving a fax
Receiving a fax automatically
1Make sure the printer is on and is connected to a working phone line....

3Set the answering machine to answer incoming calls before the printer does.
For example, if you set the answering machine to answer calls after three rings, set the printer to answer calls
after five rings.
Forwarding faxes
Use the fax-forwarding feature if you are going to be away, but still want to receive your faxes. There are three
fax-forwarding values or settings:
Off—(Default)
Forward—The printer sends the fax to the designated fax number.
Print & Forward—The printer prints the fax and then sends...

eRepeat steps c through d as necessary. You can enter up to 30 fax numbers for the group.
If you do not want to add another fax number, press the arrow buttons until No appears, and then press 
.
fEnter the group name in the Enter name field, and then press  to save the entry.
Notes:
You can include a calling card number as part of the fax number.
A fax number can include up to 64 numbers, commas, periods, spaces, and/or these symbols: * # + - ( ).
Setting up a dialing prefix
You can add a prefix to the...

4Press the arrow buttons until Ring Pattern appears, and then press .
5Press the arrow buttons until the ring pattern that you want appears, and then press .
Setting a fax manual answer code
1From the printer control panel, press .
2Press the arrow buttons until Fax Setup appears, and then press .
3Press the arrow buttons until Ringing and Answering appears, and then press .
4Press the arrow buttons until Manual Pickup Code appears.
5Enter the code you want to use.
Note: The code can include up to seven...

cPress the arrow buttons until Date/Time appears, and then press .
dEnter the date using the keypad, and then press .
eEnter the time using the keypad, and then press .
fIf the hour you entered is 12 or less, press the arrow buttons until AM, PM, or 24hr appears, and then
press 
 to save the setting.
Printing fax activity reports
You can print reports of faxes sent and/or received.
1From the printer control panel, press .
2Press the arrow buttons until Fax Setup appears, and then press .
3Press the arrow...

2To add each fax number you want to block:
aFrom the printer control panel, press .
bPress the arrow buttons until Fax Setup appears, and then press .
cPress the arrow buttons until Fax Blocking appears, and then press .
dPress the arrow buttons until Add appears, and then press .
eUse the keypad to enter the fax number in the Fax Number field, and then press  to save.
fUse the keypad to enter the name of the person associated with the fax number in the Name field.
gRepeat steps 2e through 2f until you...