Lexmark X560n User Manual

Menu itemDescription
PCL Macro List
Prints a list of PCL macros
Stored Documents
Prints a list of documents stored in the printer when using the
secure print and sample print feature
Billing Meters menu
Menu itemDescription
Total impression
Displays the total number of pages printed
Color Impression
Displays the total number of pages printed in color
Black Impression
Displays the total number of pages printed in black and white
Admin Menu
Address Book menu
Menu itemDescription
Speed Dial

Name

Fax...

Print Language menu
Menu itemDescription
PCL
Paper Supply
Auto
Tray 1 (MPT)
Tray 2
Tray 3
Document Size
Letter - 8.5 x 11”
US Folio - 8.5 x 13”
Legal - 8.5 x 14”
A4 - 210 x 297mm
A5 - 148 x 210mm
B5 - 182 x 257mm
Executive - 7.25 x 10.5”
Monarch Env. - 3.9 x 7.5”
DL Env. - 110 x 220mm
C5 Env. - 162 x 229mm
#10 Env. - 4.1 x 9.5”
New Custom Size
Portrait(Y)

Landscape(X)

Orientation
Portrait
Landscape
2 Sided Print
Off
On
Binding Edge
Flip long edge
Flip Short edge
Font
Specifies PCL settings
Notes:
Paper...

Menu itemDescription
PCL (continued)
Symbol Set

Font Size
4–50 point
Font Pitch
6.00–24.00 pitch
Form Line
5–128
Quantity
1–999
Image Enhance
Off
On
Hex Dump
Disable
Enable
Draft Mode
Disable
Enable
Line Termination
Off
Add-LF
Add-CR
CR-XX
Default Color
Black
ColorSpecifies PCL settings
Notes:
Symbol Set—Specifies the font for symbols. The factory
default setting is ROMAN-8.
Font Size—Specifies the font size. This setting is available
only for typographic fonts. Font Size can be changed in
increments of...

Network Settings menu
Menu itemDescription
Ethernet
Auto
10Base Half
10Base Full
100Base Half
100Base FullSpecifies the communication speed and the modes of Ethernet
Note: Auto is the factory default setting.
TCP/IP
Get IP Address
DHCP/Autonet
BOOTP
RARP
DHCP
Panel
IP Address

Network Mask

Gateway Address
Specifies the TCP/IP settings for the network
Note: DHCP/Autonet is the factory default setting.
Understanding printer menus
134
Downloaded From ManualsPrinter.com Manuals 

Menu itemDescription
Protocol
LPR
Disable
Enable
Port9100
Disable
Enable
FTP
Disable
Enable
SNMP
Disable
Enable
Email Alerts
Disable
Enable
Web Server
Disable
Enable
Bonjour(mDNS)
Disable
EnableSpecifies which network protocol to use
Note: Enable is the factory default setting.
IP Filter
Specifies blocking the reception of data from certain IP
addresses. You can block up to five IP addresses. The change
becomes effective after the printer is turned off and then on
again.
Note:  This feature is available...

Parallel Settings menu
Menu itemDescription
ECP
Disable
EnableSpecifies if the ECP communication mode of the parallel
interface is enabled or disabled
Note: Enable is the factory default setting.
Adobe Protocol
TBCP
BinarySpecifies PostScript communication protocol for the parallel
interface. Restart the printer after making changes in the
menu.
Note: TBCP is the factory default setting.
USB Settings menu
Menu itemDescription
Adobe Protocol
TBCP
BinarySpecifies PostScript communication protocol for the...

Menu itemDescription
Ans Select
TEL Mode
FAX Mode
TEL/FAX Mode
Ans/FAX Mode
DRPD ModeSpecifies the receiving mode
Notes:
TEL Mode—Automatic fax reception i s  t u r n e d  o f f .  Y o u  c a n
receive a fax by picking up the handset of the external
phone and then pressing the remote receive code, or by
setting OnHook to On (you can hear voice or fax tones
from the remote machine) and then pressing Start.
FAX Mode—A fax is automatically received.
TEL/FAX Mode—When the printer receives an incoming
fax,...

Menu itemDescription
Ring Tone Volume
None
Min
Middle
MaxSpecifies the volume for the incoming faxes
Note: Max is the factory default setting.
Line Type
PSTN
PBXSpecifies the line type
Note: PSTN is the factory default setting.
Dialing Type
PB
DP(10PPS)
DP(20PPS)Specifies the dialing type
Note: PB is the factory default setting.
Junk Fax Filter
Off
OnWhen Junk Fax Filter is set to On, incoming faxes are accepted
only from numbers registered in the Address Book.
Note: Off is the factory default setting....

Menu itemDescription
DRPD Pattern
Pattern1
Pattern2
Pattern3
Pattern4
Pattern5Specifies a distinctive ring pattern for use with DRPD service.
DRPD Patterns are specified by your telephone company.
Note: Pattern4 is the factory default setting.
Forward Settings
Trans. at Error
Trans. Always
Not Trans.Specifies when you want the printer to forward all of the
outgoing faxes to a specified destination
Notes:
Trans. at Error—Outgoing faxes are forwarded only
when an error occurs.
Trans. Always—Outgoing faxes...

Menu itemDescription
Extel Hook Thresh
Lower
Normal
HigherSpecifies the threshold value for the external telephone
Note: Normal is the factory default setting.
Country
Specifies the country or region where the printer is used
Note:  Country must be set before faxes can be sent.
Fwd. Error Print
Off
OnPrints the documents that failed to transfer when Fwd. Set Print
is set to Off.
Note: On is the factory default setting.
System Settings menu
Menu itemDescription
2 Mode Power Saver?
Disable
EnableSpecifies...