Lexmark X560n User Manual

3Remove any jammed paper from inside the printer.
4Close the front door.
Clearing jams
101
Downloaded From ManualsPrinter.com Manuals 

5Grasp the handle, and pull Tray 1 out. Remove the tray completely.
Clearing jams
102
Downloaded From ManualsPrinter.com Manuals 

6Remove any jammed paper from inside the tray housing.
7Align the tray, and insert it.
Clearing jams
103
Downloaded From ManualsPrinter.com Manuals 

Clearing Tray 2 jams
If the paper did not feed from Tray 2 correctly, the jam is in the tray. Jam at Tray 2 appears.
1Grasp the handle, and pull Tray 1 out. Remove the tray completely.
Clearing jams
104
Downloaded From ManualsPrinter.com Manuals 

2Remove the jam. The jam could be in the tray or behind the tray area.
Jams in the tray—Locate the single piece of paper lying on top of the stack. Pull it straight out.
Clearing jams
105
Downloaded From ManualsPrinter.com Manuals 

Jams behind the tray area—Locate the jam on the bottom surface of the tray housing. You may have to
reach far under the printer to locate the jam, as shown in the following illustration. Pull the jam straight out.
3Align the tray, and insert it.
4Push the release button, and gently lower the front door.
CAUTION—HOT SURFACE: To reduce the risk of injury from a hot component, allow the surface to cool
before touching it.
Clearing jams
106
Downloaded From ManualsPrinter.com Manuals 

5Remove any jammed paper from inside the printer.
Clearing jams
107
Downloaded From ManualsPrinter.com Manuals 

6Close the front door.
Clearing jams
108
Downloaded From ManualsPrinter.com Manuals 

Clearing Tray 3 jams
If the paper did not feed from Tray 3 correctly, the jam is in the tray. Jam at Tray 3 appears.
1Grasp the handle, and pull Tray 3 out. Remove the tray completely.
2Remove the jam. The jam could be in the tray or behind the tray area.
Jams in the tray—Locate the single piece of paper lying on top of the stack. Pull it straight out.
Clearing jams
109
Downloaded From ManualsPrinter.com Manuals 

Jams behind the tray area—Locate the jam on the bottom surface of the tray housing. You may have to
reach far under the printer to locate the jam, as shown in the following illustration. Pull the jam straight out.
3Align the tray, and insert it.
4Push the release button, and gently lower the front door.
CAUTION—HOT SURFACE: To reduce the risk of injury from a hot component, allow the surface to cool
before touching it.
Clearing jams
110
Downloaded From ManualsPrinter.com Manuals