Home > Lexmark > Printer > Lexmark X364dn User Manual

Lexmark X364dn User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark X364dn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							123
    4
    5
    6
    7
    8
    1Front door release button
    2Printer control panel
    3Automatic Document Feeder (ADF)
    4System board door
    5Front door
    6Multipurpose feeder door
    Note: Depending on your printer model, this could be the manual feeder door.
    7Standard 250‑sheet tray (Tray 1)
    8Standard exit bin
    The following illustration shows the printer back with its basic features or parts: Learning about the printer11
    Downloaded From ManualsPrinter.com Manuals 
    						
    							1
    2
    8
    47
    3
    6
    5
    1Rear door
    2Ethernet port
    3Wireless antenna
    Note: The wireless antenna appears on wireless models only.
    4Fax ports
    Note: Fax ports appear on fax models only.
    5USB port
    6Printer power cord socket
    7Power switch
    8Locking device
    Learning about the printer12
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Configured model
    The following illustration shows the printer configured with an optional 250‑ or 550‑sheet drawer:
    1
    1Optional 250‑ or 550‑sheet drawer (Tray 2)
    Basic functions of the scanner
    The scanner provides copy, fax, and scan capability. You can:
    Make quick copies, or change the settings on the printer control panel to perform specific copy jobs.
    Send a fax using the printer control panel.
    Send a fax to multiple fax destinations at the same time.
    Scan documents and send them to your computer, an e-mail address, or a flash drive.
    Note: The fax function is available on selected printer models only. Learning about the printer13
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Understanding the ADF and scanner glass
    Automatic Document Feeder (ADF)Scanner glass
    Use the ADF for multiple‑page documents.Use the scanner glass for single pages, small items (such as postcards or
    photos), transparencies, photo paper, or thin media (such as magazine
    clippings).
    Using the ADF
    The ADF can scan multiple pages, including two‑sided pages on some models. When using the ADF:
    Load the document into the ADF faceup, short edge first.
    Adjust the paper guides to touch the sides of the paper loaded.
    Remove staples before loading.
    Separate punched sheets before loading.
    Load up to 50 sheets of plain paper in the ADF input tray, based on 75 g/m2 (20 lb.) paper.
    Scan sizes from 124.46 x 127 mm (4.9 x 5 in.) to 215.9 x 355.6 mm (8.5 x 14 in.).
    Scan documents with mixed page sizes (letter and legal).
    Scan media weights from 52 to 120 g/m2 (14 to 32 lb).
    Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
    into the ADF. Place these items on the scanner glass.
    Using the scanner glass
    The scanner glass can be used to scan or copy single pages or book pages. When using the scanner glass:
    Place a document facedown on the scanner glass in the upper left corner.
    Scan or copy documents up to 215.9 x 297.18 mm (8.5 x 11.7 in.).
    Copy books up to 25.3‑mm (1‑in.) thick. Learning about the printer14
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Understanding the printer control panel
    Shortcuts
    3DEF6MNO9WXYZ#
    2ABC5JKL8TUV0 1
    @!.4PQRS7
    *
    FaxRedial/Pause
    Resolution
    Options
    Hook
    Select
    Start Stop/Cancel Menu
    Back Copy
    Copies
    Scale
    Options Content
    Darkness
    Duplex/2-SidedText
    Text/Photo
    PhotoCopy
    Scan/Email
    Fax
    12
    3
    ItemDescription
    1Selections and
    settingsSelect a function such as Copy, Scan, Email, or Fax. Change default copy and scan settings such
    as the number of copies, duplex printing, copy options, and scaling. Use the address book when
    scanning to e‑mail.
    2Display  area View scanning, copying, faxing, and printing options as well as status and error messages. Access
    the administration menus, start, stop, or cancel a print job.
    3Keypad area Enter numbers, letters, or symbols on the display, print using the USB flash memory device, or
    change the default fax settings.
    1
    2
    3
    4
    5
    6
    7 8 9 10
    ItemDescription
    1Copy Enters the copy function
    2Content Enhances copy, scan, e‑mail, or fax quality. Choose from Text, Text/Photo, or Photo.
    3Copies Enters the number of copies to print
    4Scale Changes the size of the copied document to fit onto the currently selected paper size
    5Options Changes Original Size, Paper Source, and Collate settings
    6Address Book Opens the address book
    7Darkness Adjusts the current darkness settings
    Learning about the printer15
    Downloaded From ManualsPrinter.com Manuals 
    						
    							ItemDescription
    8Duplex 2-Sided Makes a two‑sided copy
    Note: On selected printer models, you can also perform two‑sided scan jobs.
    9Fax Enters the fax function
    Note: Fax mode is not available on selected printer models.
    10Scan/Email Enters the scan or scan to e‑mail function
    9876
    543 2
    1
    ItemDescription
    1Menu
    Enters the administration menus
    2Display View scanning, copying, faxing, and printing options as well as status and error messages.
    3Stop/Cancel
    Stops all printer activity
    4Start
    Starts a copy or scan job
    5Right arrow
    Scrolls right
    Learning about the printer16
    Downloaded From ManualsPrinter.com Manuals 
    						
    							ItemDescription
    6Select
    Accepts menu selections and settings
    7Left arrow
    Scrolls left
    8Indicator light
    Off—The power is off.
    Blinking green—The printer is warming up, processing data, or printing.
    Solid green—The printer is on, but idle.
    Blinking red—Operator intervention is needed.
    9Back
    Returns one screen at a time to the Ready screen
    Note: An error beep sounds when you press 
     if a flash drive is connected and the USB menu is
    displayed.
    12
    3
    4 5 6 7
    ItemDescription
    1Redial/Pause
    Press once to cause a two- or three-second dial pause in a fax number. In the “Fax To” field,
    a Dial Pause is represented by a comma (,).
    Press to redial a fax number.
    2Keypad Enters numbers, letters, or symbols on the display
    Learning about the printer17
    Downloaded From ManualsPrinter.com Manuals 
    						
    							ItemDescription
    3Front USB port
    Lets you scan to a flash drive or print supported file types
    Notes:
    The front USB port is available only on selected printer models.
    When a USB flash memory device is inserted into the printer, the printer can only scan to
    the USB device or print files from the USB device. All other printer functions are
    unavailable.
    4Shortcuts
    #
    Enters the shortcut screen
    5Hook
    Press  once to take the telephone line off‑hook (like picking up a telephone receiver). Press
     a second time to hang up the line.
    Note: The Hook button is available only on selected printer models.
    6Options Changes Original Size, Broadcast, Delayed Send, and Cancel settings
    7Resolution Selects a dpi value for the scan
    Note: Press the arrow buttons to scroll through the values, and then press 
     to enter a
    value.
    Learning about the printer18
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Additional printer setup
    Installing internal options
    CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
    devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
    wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
    and unplug any cables going into the printer.
    Installing a flash memory card
    The system board has a connection for one optional flash memory card.
    CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
    devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
    wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
    and unplug any cables going into the printer.
    Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
    something metal on the printer before touching any system board electronic components or connectors.
    1Access the system board.
    Additional printer setup19
    Downloaded From ManualsPrinter.com Manuals 
    						
    							2Unpack the card.
    Note: Avoid touching the connection points along the edge of the card.
    3Holding the card by its sides, align the card with the connector on the system board.
    4Push the card firmly into place.
    Notes:
    The entire length of the connector on the card must touch and be flush against the system board.
    Be careful not to damage the connectors.
    If your printer model does not fax, your system board will not have the fax card attached to the system
    board.
    5Close the system board door. Additional printer setup20
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark X364dn User Manual