Lexmark Prospect Pro205 User Manual

5Press the up or down arrow button to select a photo printing option, and then press .
Note: You can choose to print all the photos, print photos that fall within a date range, print selected photos by
photo range, print photos using pre-defined photo size templates, or print pre-selected photos from a digital
camera using Digital Print Order Format (DPOF). The DPOF option appears only when there is a valid DPOF file in
your memory device.
6Press the left or right arrow button to select the layout of the...

10If you want to adjust the print settings:
aPress  again.
bPress the arrow buttons to make your selections.
cPress  to save your selections.
dPress the up or down arrow button to scroll to Continue, and then press .
11Press the Color/Black button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
12Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from...

Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer.
WFI IPRINTING
Notes:
Make sure that the digital camera is set to the correct USB mode. If the camera USB selection...

4If you want to change the default print settings:
aPress  to access the PictBridge menu.
bPress the arrow buttons to select the paper size, paper type, photo size, and layout of the photos that you want
to print. Press 
 each time you make a selection.
Note: The printer will use the default print settings unless you change the print settings from the camera.
5See the documentation for your camera to begin printing.
Note: If you insert the camera while the printer is performing another job, then wait for...

11Press the Color/Black button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
12Press  to print the photos.
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a digital camera using DPOF
If your camera supports Digital Print Order Format (DPOF), then you can specify which photos to print, how many of
each, and the print settings while the memory card is...

The Bluetooth-enabled device you are using requires users to set up a Bluetooth connection on every print job. For
more information, see the documentation for your Bluetooth device.
The name of the Bluetooth device you are using is automatically deleted from the Bluetooth device list.
When the Bluetooth security level is set to High, the printer saves a list of up to eight Bluetooth devices that have
previously set up a connection with the printer. When the printer detects more than eight devices, the...

Setting the Bluetooth security level
1Insert a Bluetooth USB adapter into the USB port.
WFI IP
R
I
N
T
I
N
G
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2From the printer control panel, press .
3Press the up or down arrow button to scroll to Bluetooth Setup, and then press button .
4Press the up or down arrow button to scroll to Security Level, and then press .
5Press the up or down arrow button to select the security level, and then...

1Insert a USB Bluetooth adapter into the USB port.
WFI IP
R
I
N
T
I
N
G
Bluetooth Dongle Connected appears on the display.
Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the USB Bluetooth
adapter, or the printer in the areas shown while actively printing, reading, or writing from a Bluetooth-enabled
device. A loss of data can occur.
Notes:
A Bluetooth adapter is not included with the printer.
Your printer automatically switches to Bluetooth mode when you insert a USB...

3Navigate to:
Advanced tab > 2-Sided Printing area > select On
Note: To use the settings defined in the printer, select Use Printer Settings.
4Select either the Side Flip or Top Flip option. Side Flip is the setting most often used.
5Click OK to close any printer software dialogs.
6Click OK or Print.
To return to single-sided printing, navigate to:
Advanced tab > 2-Sided Printing area > select Off
For Macintosh users
1With a document open, choose File > Page Setup.
2From the Page Setup dialog, set the...

Setting the duplex printing dry time (Macintosh only)
In Mac OS X version 10.6
1From the Apple menu, navigate to:
System Preferences > Print & Fax > select your printer > Open Print Queue > Printer Setup > Driver
2From the Two-Sided Printing Dry Time pop-up menu, choose a dry time setting.
Note: Under conditions of high humidity, or if the normal drying time does not allow the ink to dry completely,
choose Extended.
3Click OK or Apply Changes.
In Mac OS X version 10.5 or earlier
1With a document open,...