Lexmark Interpret S405 User Manual

Working with photos
Using a memory card or flash drive with the printer
Memory cards and flash drives are storage devices frequently used with cameras and computers. You can remove the
memory card from the camera or the flash drive from the computer and insert it directly into the printer.
1Insert a memory card into the card slot or a flash drive into the USB port.
Inserting a memory card Inserting a flash drive
WFI I
M
E
M
O
RYS
T
I
C
K
Notes:
Insert the card with the brand name label facing right.
Make...

Supported memory cards and file types
Memory CardFile Type
Secure Digital (SD)
Secure Digital High Capacity (SDHC)
Micro Secure Digital (with adapter) (Micro SD)
Mini Secure Digital (with adapter) (Mini SD)
MultiMedia Card (MMC)
Reduced Size MultiMedia Card (with adapter) (RS-MMC)
MultiMedia Card mobile (with adapter) (MMCmobile)
Memory Stick
Memory Stick PRO
Memory Stick Duo (with adapter)
Memory Stick PRO Duo (with adapter)
xD-Picture Card
xD-Picture Card (Type H)
xD-Picture Card (Type M)
Documents:...

7Press the Color/Black button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
8Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a memory device using the printer software
1Load photo paper with the glossy or printable side faceup. (If you are not sure which side is the printable side, then
see the instructions that came with the paper.)
2From...

Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer.
WFI IPRINTING
Notes:
Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the...

Printing photos from a memory device using the proof sheet
1Load letter- or A4-size plain paper.
2From the printer control panel, press .
3Insert a memory card or flash drive.
If document files and image files are stored in the memory device, then press the arrow buttons to select
Photos, and then press 
.
4Press the arrow buttons to scroll to Proof Sheet, and then press .
5Press the arrow buttons to select an option to print a proof sheet.
You can print a proof sheet:
For all photos on the memory...

Printing photos from a digital camera using DPOF
If your camera supports Digital Print Order Format (DPOF), then you can specify which photos to print, how many of
each, and the print settings while the memory card is still in the camera. The printer recognizes these settings when
you insert the memory card into the printer or connect the camera to the printer.
Note: If you specify a photo size while the memory card is still in the camera, then make sure that the size of the paper
loaded in the printer...

To set up a connection between the printer and a Bluetooth-enabled device:
1Insert a USB Bluetooth adapter into the USB port located on the front of the printer.
WFI IP
R
I
N
T
I
N
G
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2From the printer control panel, press .
3Press the arrow buttons to scroll to Bluetooth Setup, and then press .
4Press the arrow buttons to scroll to Discovery, and then press .
5Make sure Discovery is set to On....

Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2From the printer control panel, press .
3Press the arrow buttons to scroll to Bluetooth Setup, and then press button .
4Press the arrow buttons to scroll to Security Level, and then press .
5Press the arrow buttons to select the security level, and then press .
Select Low to allow Bluetooth devices to connect and send print jobs to your printer without requiring users to
enter a pass key....

3Set up the Bluetooth device to print to the printer. For more information, see the documentation for your Bluetooth
device.
4See the documentation for your Bluetooth device to begin printing.
Note: If the Bluetooth Security Level on the printer is set to High, you must enter a pass key.
Managing print jobs
Setting your printer as the default printer
Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually
select your printer, then it is not...

For Macintosh users
1With a document open, choose File > Print.
2From the printer pop-up menu, choose the printer.
3From the print options pop-up menu, choose Print Settings or Quality & Media, depending on your operating
system.
4From the Print Quality pop-up menu, choose Draft or Quick Print as the printing mode.
5From the Presets pop-up menu, choose Save as, and then type a name for your setting configuration.
You must choose this configuration name from the Presets pop-up menu for each print job....