Lexmark Interpret S405 User Manual

Load up to:Make sure that:
10 iron-on transfersYou follow the loading instructions on the iron-on transfer
packaging.
The print side of the transfer is faceup.
The paper guides rest against the edges of the transfer.
You select Automatic, Normal, or Photo print quality.
50 transparenciesThe rough side of the transparencies is faceup.
The paper guides rest against the edges of the
transparencies.
Saving paper default settings
You can set the default paper size, paper type, and photo print size for the...

Loading original documents on the scanner glass
1Open the scanner lid and place the document facedown on the scanner glass.
2Close the scanner lid.
WFI IP
R
I
N
T
I
N
G
WFI IP
R
I
N
T
I
N
G
Loading original documents into the ADF
You can load up to 35 sheets of an original document into the ADF for scanning, copying, and faxing. You can load A4-,
letter-, or legal-size paper into the ADF.
1Adjust the paper guide on the ADF tray to the width of the original document.
2Load the original document faceup and...

Printing
Tips for printing
Use the appropriate paper for your print job.
Select a higher print quality for better prints.
Make sure there is enough ink in the ink cartridges.
Remove each sheet as it is printed when printing photos or when working with specialty media.
Select the borderless setting when printing photos.
Printing basic documents
Printing a document
For Windows users
1With a document open, click File > Print.
2Click Properties, Preferences, Options, or Setup.
3Select the print quality, the...

Collating printed copies
When printing multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies
as groups of pages (not collated).
Collated Not collated
Notes:
The collate option is available only when you are printing multiple copies.
To prevent smudging when printing photos, remove each photo as it exits the printer, and then let it dry before
stacking.
For Windows users
1With a document open, click File > Print.
2Click Properties, Preferences,...

3From the Copies area of the Print Setup tab, select a page order:
To print the last page first, select Print Last Page First.
To print the first page first, clear the Print Last Page First check box.
Note: If two-sided printing is enabled, then you cannot print the last page first. To change the print order, you
must first disable two-sided printing.
4Click OK to close any printer software dialogs.
5Click OK or Print.
For Macintosh users
1With a document open, choose File > Page Setup.
2From the Page...

4From the menu bar, choose File > Print.
5From the Printer pop-up menu, choose your printer.
6From the print options pop-up menu, choose Layout.
7From the Pages per Sheet pop-up menu, choose the number of page images to print on each page.
8Adjust other settings as needed.
9Click Print.
Printing on both sides of the paper (duplexing) manually
For Windows users
1With a document open, click File  Print.
2Click Properties, Preferences, Options, or Setup.
3Click the Advanced tab.
4From the 2-Sided Printing...

5After printing the first set of pages, flip and reload the paper.
WFI IPRINTING
3
1
2
6Repeat steps 1 and 2.
7From the Print or “Pages to print” pop-up menu, select to print the even-numbered pages.
8Click Print.
Printing documents from a memory card or flash drive (Windows only)
To enable the File Print function:
The printer must be connected to a computer through a USB cable or through a network.
The printer and the computer must be on.
The memory card or flash drive must contain document files that...

cWhen prompted, press the arrow buttons to select the name of the network computer, and then press  to
start printing the document.
Notes:
You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.
To assign a computer name and a PIN to the computer, see the Help for the printer software associated
with your operating system.
Printing specialty documents
Printing envelopes
For Windows users
1With a document open, click File > Print.
2Click Properties, Preferences,...

Printing labels
For Windows users
1With a document open, click File > Print.
2Click Properties, Preferences, Options, or Setup.
3Navigate to:
Print Setup tab > Paper Type list > select your paper type
4Navigate to:
Paper Size list > select your paper size
If no paper size matches the label sheet size, then set a custom size.
5Click OK to close any printer software dialogs.
6Click OK or Print.
For Macintosh users
1With a document open, choose File > Page Setup.
2From the “Format for” pop-up menu, choose...

Printing on custom-size paper
For Windows users
1With a document open, click File > Print.
2Click Properties, Preferences, Options, or Setup.
3Navigate to:
Print Setup tab > Paper Size list > select Custom Size
4Adjust the settings as needed to create a custom size, and then click OK.
5Click OK to close any printer software dialogs.
6Click OK or Print.
For Macintosh users
1With a document open, choose File > Page Setup.
2From the “Format for” pop-up menu, choose your printer.
3From the Paper Size pop-up...