Home > Lexmark > Printer > Lexmark C935dtn User Manual

Lexmark C935dtn User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark C935dtn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Menu itemDescription
    Set Zone
    Provides a list of AppleTalk zones available on the network
    Note: The default setting is the default zone for the network. If no default
    zone exists, the zone marked with an * is the default setting.
    LexLink menu
    Menu itemDescription
    View Nickname
    Shows the assigned LexLink nickname
    Activate
    On
    OffActivates or deactivates LexLink support
    Note: On is the factory default setting.
    USB Direct menu
    Menu itemDescription
    USB Direct
    Enable
    DisableSpecifies whether support for the USB Direct interface on the control panel is
    enabled
    Note: Enable is the factory default setting. Enable must be selected in order to
    print directly from a device connected to the USB Direct interface.
    Help menu
    The Help menu consists of a series of Help pages that are stored in the printer as PDFs. They contain information about
    using the printer and performing printing tasks.
    English, French, German, and Spanish translations are stored in the printer. Other translations are available on the
    Software and Documentation CD.
    Menu itemDescription
    Print All Prints all the guides
    Print Quality Provides information about solving print quality issues
    Color Quality Provides information about adjusting and customizing color printing
    Printing Guide Provides information about loading paper and other speciality media
    Supplies Guide Provides part numbers for ordering supplies
    Media Guide Provides a list of the paper sizes supported in trays, drawers, and feeders
    Menu Map Provides a list of the control panel menus and settings
    Information Guide Provides help in locating additional information
    Connection Guide Provides information about connecting the printer locally (USB) or to a network
    Moving Guide Provides instructions for safely moving the printer
    Understanding printer menus111
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Understanding printer messages
    List of status and error messages
    Activating Menu Changes
    Wait for the message to clear.
    Activating PPDS Mode
    The PPDS emulator has been activated. Wait for the message to clear.
    Bin  Full
    Remove the stack of paper from the specified exit bin to clear the message.
    Busy
    Wait for the message to clear.
    Calibrating
    Wait for the message to clear.
    Cancel not available
    Wait for the message to clear.
    Canceling
    Wait for the message to clear.
    Change  to 
    Press  until Continue appears, and then press  if the paper was changed.
    Press  until Use Current appears, and then press  to print on the paper currently in the printer.
    Cancel the current print job.
    For more information, select Show Me. Understanding printer messages112
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Check  guides
    The printer cannot determine the size of the paper.
    Readjust the paper guides.
    Note: To learn how to adjust the paper guides, press 
     repeatedly until Show Me appears, and then press
    .
    Check the tray configuration.
    Clearing job accounting statistics
    Wait for the message to clear.
    Close cover 
    1Press  until Show me appears, and then press .
    An image of the cover appears.
    2Close the specified cover to clear the message.
    Close door 
    1Press  until Show me appears, and then press .
    An image of the open door appears.
    2Close the specified door.
    Copies
    Enter the desired number of copies.
    Deactivating PPDS Mode
    The PPDS emulator has been deactivated. Wait for the message to clear.
    Defragmenting Flash DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not turn the printer off while this message appears on the display.
    Delete/Delete all/Delete all confidential jobs
    Press  until Continue appears, and then press  to delete the specified job.
    Press  to delete the job. Understanding printer messages113
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Deleting
    Wait for the message to clear.
    Disabling DLEs
    Wait for the message to clear.
    Disabling Menus
    Wait for the message to clear.
    Note: While the menus are disabled, printer settings cannot be changed from the control panel.
    Disk Corrupted. Reformat?
    The printer attempted to recover a disk, but was not able to do so. Reformat appears. Press  to reformat the
    disk.
    Note: Reformatting the disk deletes all the files currently stored on the disk.
    Disk recovery x/y XX% DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not power off while the printer is attempting to recover the printer hard disk.
    Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.
    Empty hole punch box
    Empty the hole punch box, and then reinsert it into the finisher. Wait for the message to clear.
    Note: To learn how to empty the hole punch box, press 
     repeatedly until Show Me appears, and then press .
    Enabling Menus
    Wait for the message to clear.
    Encrypting disk x/y XX% DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not power off while the printer is encrypting the printer hard disk.
    The percentage completed appears on the display. Understanding printer messages114
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Enter PIN
    Enter the PIN you created in Print Properties when the confidential job was sent for printing.
    Enter PIN to lock
    Enter the PIN you created to lock the control panel and prevent menu changes.
    Error reading USB drive
    Remove the device and wait for the message to clear. The USB drive may be corrupted.
    Flushing buffer
    Wait for the message to clear.
    Formatting Disk x/y XX% DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not power off while the printer is formatting the printer hard disk.
    The percentage completed appears on the display.
    Formatting Flash DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not power off while the printer is formatting the flash memory.
    Incorrect orientation
    Change the orientation of the paper in the tray or the position of the paper guides. Make sure the print job is requesting
    the correct paper size.
    Insert hole punch box
    Insert the hole punch box into the finisher. Wait for the message to clear.
    Note: To learn how to insert the hole punch box, press 
     repeatedly until Show Me appears, and then press .
    Insert Tray 
    Insert the specified tray into the printer. Understanding printer messages115
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Internal System Error, Reload Bookmarks
    1Press  until Continue appears, and then press  to clear the message and continue printing.
    2Reload the bookmarks.
    Internal System Error, Reload Security Certificates
    Reload the security certificates.
    Press  until Continue appears, and then press  to clear the message and continue printing.
    Invalid Engine Code
    You need to download valid engine code for the printer.
    For information about downloading code, see the Users Guide on the Software and Documentation CD.
    Note: Engine code may be downloaded while this message appears on the display.
    Invalid file format
    A file stored on the USB drive is invalid. The file extension is correct, but the file contents are not properly formatted.
    Convert files to any of the following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
    Invalid Network Code
    You need to download valid network printing code for the internal print server. The internal print server is a hardware
    option installed inside the printer.
    Note: Network code may be downloaded while this message appears on the display.
    Invalid PIN
    Enter a valid PIN.
    Load manual feeder with 
    Load the specified paper in the multipurpose feeder.
    Note: To learn how to load the multipurpose feeder, press 
     repeatedly until Show Me appears, and then
    press 
    .
    Press  repeatedly until Continue appears, and then press  to clear the message and continue printing.
    If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
    a tray with the correct paper type and size, it prints from the default source.
    Cancel the current job. Understanding printer messages116
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Load  with 
    Load the paper tray or other source with the correct paper type and size.
    Note: To learn how to load the specified paper source, press 
     repeatedly until Show Me appears, and then
    press 
    .
    Cancel the current job.
    Load staples 
    Replace the specified staple cartridge in the finisher.
    Note: To learn how to replace the specified staple cartridge, press 
     repeatedly until the Show Me message
    for the specified staple cartridge appears, and then press 
    .
    Press  repeatedly until Continue appears, and then press  to clear the message and continue printing.
    Cancel the print job.
    Menus are disabled
    The printer menus are disabled. The printer settings cannot be changed from the control panel. Contact your system
    support person for help.
    Note: When menus are disabled, it is still possible to cancel a print job, print a confidential job, or print a held job.
    Network/Network 
    The printer is connected to the network.
    Network indicates that the printer is using the standard network port built into the printer system board. Network
     indicates that an internal print server is installed inside the printer or that the printer is connected to an external
    print server.
    No held jobs
    Wait for the message to clear.
    No jobs to cancel
    Wait for the message to clear.
    No recognized file types
    Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the following
    supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx. Understanding printer messages117
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Power Saver
    The printer is saving power while it waits for the next print job.
    Send a job to print.
    Press  to warm the printer to normal operating temperature. Afterwards, Ready appears.
    Printer locked, enter PIN to unlock
    The control panel is locked. Enter the correct PIN to unlock it.
    Printing
    Wait for the message to clear.
    Programming disk DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not turn the printer power off while Programming disk appears on the
    display.
    Programming flash DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not turn the printer power off while Programming flash appears on the
    display.
    Programming System Code DO NOT POWER OFF
    Wait for the message to clear.
    Warning—Potential Damage: Do not turn the printer power off while Programming System Code appears on
    the display.
    Reading USB drive DO NOT REMOVE
    Wait for the message to clear.
    Ready
    The printer is ready to receive print jobs. Understanding printer messages118
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Remote Management Active DO NOT POWER OFF
    The printer settings are being configured. Wait for the message to clear.
    Warning—Potential Damage: Do not turn the printer power off while Remote Management Active appears
    on the display.
    Remove paper from all bins
    Output bins have reached their capacity. Remove paper from all output bins to clear the message and continue printing.
    Remove paper from standard bin
    The standard exit bin has reached its capacity. Remove paper from the standard exit bin to clear the message and
    continue printing.
    Remove paper from bin 
    The specified output bin has reached its capacity. Remove paper from the specified bin to clear the message and
    continue printing.
    Resetting the printer
    Wait for the message to clear.
    Restore Held Jobs?
    Press  until Continue appears, and then press  to restore all held jobs stored on the printer hard disk.
    Press  until Do not restore appears, and then press . No print jobs will be restored.
    Restoring Factory Defaults
    Wait for the message to clear.
    When factory default settings are restored:
    All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
    All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom
    settings in the Serial , Network, Infrared, LocalTalk, and USB menus.
    Restoring Held Job(s) x/y
    Wait for the message to clear.
    Press  until Quit restoring appears, and then press  to delete unrestored held jobs.
    Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored. Understanding printer messages119
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Serial 
    The printer is using a serial cable connection. The serial port is the active communication link.
    Some held jobs were not restored
    Press  until Continue appears, and then press  to delete the specified job.
    Some held jobs will not be restored
    Press  until Continue appears, and then press  to clear the message and resume printing.
    Cancel the current job.
    Standard Bin Full
    Remove the stack of paper from the standard exit bin to clear the message.
    Staples  empty or misfed
    Load the specified staple cartridge into the finisher to clear the message and continue stapling.
    Staples  low or missing
    Load the specified staple cartridge in the finisher to clear the message.
    Submitting Selection
    Wait for the message to clear.
    Tray  Empty
    Load paper in the tray to clear the message.
    Tray  Low
    Load paper in the specified tray to clear the message.
    Tray  Missing
    Insert the specified tray into the printer.
    USB/USB 
    The printer is using a USB cable connection. The USB port is the active communication link. Understanding printer messages120
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark C935dtn User Manual