Home > Land Rover > Automobile > Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

Here you can view all the pages of manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.

Page 761

PANEL REPAIRS
-34 REPAIRS
Body side panel - sill section
In this procedure the sill section of the body side 
panel is changed.
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove rear road wheel.
4.Remove front and rear doors.
5.Remove SRS side crash sensor. 
 
 +  RESTRAINT SYSTEMS, REPAIRS, 
Crash sensor - side.
6.Remove front seat belt.
7.Remove front and rear door tread plates. 
8.Remove front and rear door aperture seals. 
9.Remove sill finisher. 
 
 +  EXTERIOR FITTINGS,...

Page 762

PANEL REPAIRS
REPAIRS -35
12.Fit SRS side crash sensor. 
 
 +  RESTRAINT SYSTEMS, REPAIRS, 
Crash sensor - side.
13.Fit front and rear doors.
14.Fit rear road wheel.
15.Connect alternator. 
16.Connect battery earth lead.Body side panel - sill and B/C post 
section
In this procedure the sill and B/C post section of the 
body side panel is changed.
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove all components that are removed on 
the sill section of the body side panel. 
 
 +  ,...

Page 763

PANEL REPAIRS
-36 REPAIRS
Refit
1.Fit headlining. 
 
 +  INTERIOR FITTINGS, REPAIRS, 
Headlining.
2.Fit all components that are removed on the sill 
section of the body side panel. 
 
 +  , , Body side panel - sill section.
3.Connect alternator. 
4.Connect battery earth lead.
B/C post reinforcement
In this procedure the sill and B/C post section of the 
body side panel is changed.
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove all components that are removed on 
the sill and...

Page 764

PANEL REPAIRS
REPAIRS -37
Refit
1.Fit all components that are removed on the sill 
and B/C post section of the body side panel. 
 
 +  , , Body side panel - sill section.
2.Connect alternator. 
3.Connect battery earth lead.
Sill reinforcement
In this procedure the sill and B/C post section of the 
body side panel is changed.
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove all components that are removed on 
the sill section of the body side panel. 
 
 +  , , Body side panel -...

Page 765

PANEL REPAIRS
-38 REPAIRS
Body side panel - rear section
In this procedure, the rear outer body side panel is 
replaced in conjunction with the complete rear 
quarter. 
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove rear road wheel.
4.Remove rear door.
5.Remove rear door and tail door aperture seals. 
6.Remove rear door and tail door strikers.
7.Remove sill finisher. 
 
 +  EXTERIOR FITTINGS, REPAIRS, 
Extension - spoiler - front bumper.
8.Remove rear bumper armature. 
 
 +...

Page 766

PANEL REPAIRS
REPAIRS -39
2.Remove existing panel(s), prepare panel joint 
faces and install new panel(s) in accordance 
with Panel Replacement Procedure. Punch or 
drill holes in new panel for plug welding as 
shown.
Refit
1.Fit insulation to rear quarter area.
2.Position vehicle harness to D post and rear 
quarter area.
3.Fit luggage compartment carpet.
4.Fit all navigation and in car entertainment 
components to rear quarter area. 
 
 +  NAVIGATION AND IN CAR 
ENTERTAINMENT, REPAIRS, Power...

Page 767

PANEL REPAIRS
-40 REPAIRS
Rear wheel arch reinforcement - upper
In this procedure, the rear wheel arch upper 
reinforcement is replaced in conjunction with the rear 
section of the body side panel.
The upper rear wheel arch reinforcement must be 
removed before the wheel arch assembly can be 
removed.
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove rear section of the body side panel. 
 
 +  , , Body side panel - rear section.
Repair
1.Remove existing panel(s), prepare panel...

Page 768

PANEL REPAIRS
REPAIRS -41
Body side - rear extension
In this procedure, the body side rear extension in 
conjunction with the inner body side rear panel.
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove rear section of the body side panel. 
 
 +  , , Body side panel - rear section.
Repair
1.Remove existing panel(s), prepare panel joint 
faces and install new panel(s) in accordance 
with Panel Replacement Procedure. Punch or 
drill holes in new panel for plug welding as 
shown....

Page 769

PANEL REPAIRS
-42 REPAIRS
Refit
1.Fit rear section of the body side panel. 
 
 +  , , Body side panel - rear section.
2.Connect alternator. 
3.Connect battery earth lead.
Body rear - outer panel
Remove
1.Disconnect battery earth lead.
2.Disconnect alternator. 
3.Remove tail door lower. 
4.Remove tail door aperture seal.
5.Remove rear bumper armature. 
 
 +  EXTERIOR FITTINGS, REPAIRS, 
Bumper armature - rear.
6.Remove tow bar.
7.Remove exhaust assembly. 
 
 +  MANIFOLD AND EXHAUST SYSTEM 
- Td6, REPAIR,...

Page 770

PANEL REPAIRS
REPAIRS -43
Refit
1.Secure vehicle harness to rear body lower 
closing.
2.Fit luggage space carpet. 
3.Fit LH and RH rear quarter lower trim casings. 
4.Fit air supply unit. 
 
 +  FRONT SUSPENSION, REPAIRS, Air 
supply unit.
5.Fit both tail lamp assemblies. 
 
 +  LIGHTING, REPAIRS, Lamp 
assembly - tail.
6.Fit tail door lower. 
7.Fit tail door aperture seal.
8.Fit rear bumper armature. 
 
 +  EXTERIOR FITTINGS, REPAIRS, 
Bumper armature - rear.
9.Fit tow bar.
10.Fit exhaust assembly....
Start reading Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

Related Manuals for Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

All Land Rover manuals