Kyocera KM C4035E User Manual

Basic Operation
3-11
Duplex Mode
Use Duplex mode to create two-sided copies from a 
variety of originals, including facing pages (such as 
books or magazines) and two-sided originals.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. The back side of the last copied page will be 
blank for originals with an odd number of pages. 
The following binding options are available.
• Original Left/Right Bind to Finish Left/Right Bind: Back side is copied with same orientation as 
front...

Basic Operation
3-12
Book to Two-sided
Produces two-sided copies from originals such as books and magazines with facing pages.
NOTE: Supported paper sizes for Book to Two-Sided operation are limited to: 11 × 17, 81/2×11, 
A3, B4, A4R, B5R, A5R, and 8K. 
Follow the steps as below to use duplex copying.
1Press [Function]. 
2Press [2 sided/Separation] 
([2-sided/Split]). 
3Select the desired Duplex mode.
4For [2 sided J 2 sided] ([2-sided J 
2-sided]) or [Book J 2 sided] ([Book J 
2-sided]), select the bind...

Basic Operation
3-13
For [1 sided J 2 sided] ([1-sided J 
2-sided]) or [2 sided J 2 sided] ([2-sided 
J 2-sided]), select the bind direction for 
Finished. 
For [Book J 2 sided] ([Book J 2-sided]), 
set the copy page order for Finished. 
For [1 sided J 2 sided] ([1-sided J 
2-sided]) or [2 sided J 2 sided] ([2-sided 
J 2-sided]), set [Top Edge] ([Back 
Edge]) or [Left Top Edge] ([Left top 
corner]) from Select Original Image 
Direction. 
5Place the original and press the Start key. 
If the original has...

Basic Operation
3-14
Split Mode
Use Split mode to create single-sided copies from two-sided originals or originals with facing pages 
(such as books or magazines) as follows.
Two-sided to One-sided
Copies each side of a two-sided original onto two individual sheets.
NOTE: This operation requires the optional document processor. 
The following binding options are available.
• Open from Left/Right: The back side and front side of the original are copied with the same 
orientation. 
• Open from top: The...

Basic Operation
3-15
2Press [2 sided/Separation] 
([2-sided/Split]). 
3 Select the desired Split mode.
4Specify the binding in the Original 
section. 
5When [2 sided J 1 sided] ([2-sided J 
1-sided]) is selected, select [Top Edge] 
([Back Edge]) or [Left Top Edge] ([Left 
top corner]) for Select Original Image 
Direction. 
6Place the original and press the Start key. 
If the original has been placed on the optional 
document processor, copying begins automatically. 
If the original is placed on the...

Basic Operation
3-16
Sort Mode
Scans multiple originals to deliver complete sets of 
copies as required according to page number. 
Follow the steps as below to use Sort mode.
1Press [Function]. 
2Press [Sort/Offset] ([Sort/Group]). 
3Press [Sort: On]. 
4Use the numeric keys to enter the copy quantity.
5Place the original and press the Start key. 
If the original has been placed on the optional 
document processor, copying begins automatically. 
If the original is placed on the platen, Scan next...

Basic Operation
3-17
Interrupt Copy
Interrupt copying is useful to pause one copy job and 
copy other originals with different copy settings. After 
completing the urgent job, you can resume the 
interrupted jobs according to their original settings. You 
can also pause copy or print jobs to make emergency 
copies. 
Follow the steps as below to use interrupt copying.
1Press the Interrupt key. 
Interrupt Mode OK will be displayed. 
2Temporarily remove and set aside the original pages of the current job.
3...

Basic Operation
3-18
Job Reservation
Scan an original and reserve the next job even when a copy or print job is being outputted. The 
reserved job will be started after the current job is completed. If the optional fax is installed, reserve 
jobs even when received fax data is being printed. 
Follow the steps as below to use Job Reservation mode.
1Press [Reserve next copy]. 
Copying can be reserved will be 
displayed.
2Place the Job Reservation original. 
3Specify the copy settings for the 
reserved...

Basic Operation
3-19
Canceling a Print Job
Follow the steps below to cancel printing and clear data. 
Canceling a Print Job Currently Being Processed 
Use the printer screen to cancel a print job that is currently spooling. 
1Press the Printer key. 
2Press [Cancel]. 
3 Select the interface to cancel. 
4Printing is canceled. 
Or i g. Page
Ca nce l
Processing.
11×8½
Network I/F
User name: NO USER NAME
Select interface to cancel the job.
OnBa ck
USB Network
Seri al Parall el Cur r e nt
Job
Downloaded From...

Basic Operation
3-20
Scanner Operation
This section explains basic scanner operation. The following 5 methods may be used to scan 
originals. 
• Scan an Image for Send E-mail...3-20
• Scan an Image for Scan to PC...3-23
• Scan an Image Using TWAIN...3-27
• Database Connection Setup...3-28
• Scan an Image for Scan to FTP...3-32
Scan an Image for Send E-mail
Use Send E-mail to send a scanned original image to an e-mail recipient as an attachment. 
Before using Send E-mail
This operation requires the...