Kyocera KM C4035E User Manual

Part Names
1-5
Touch Panel
Copy Screen
Displayed by pressing the Copier key. Screen changes when 1, 2, 3, 4, and 5 are pressed. 
1[Basic] screen
2[User choice] screen
3[Function] screen
4[Color func.] ([Colour 
func.]) screen
11×8½ Paper Si ze Set
Co mbi ne
Sheet Ma r g i n /
Ce nte r i ng
Col or  func. Functi on User choice
Ba si c 11×8½
Plain
11×17
Co l o r
11×8½
Plain
11×8½
PlainMP  tr a y
Plain AP SAuto %
Re d u ce 100%
Exposur e Auto
Stapl e Stapl e
Left Top Stapl e Off100%
Exposur e
/Enlarge ModeEr...

Part Names
1-6
5[Program] screen
Printer Screen 
Displayed by pressing the 
Printer key. 
Scanner Screen
Displayed by pressing the 
Scanner key. 
11×8½ Paper  Si ze Set
Co mbi ne
Sheet Ma r g i n /
Ce n te r i n g
Col or  func. Function User choice Ba si cCha nge Delete abc100%Ready to copy.
NameEr ase
Pr ogr amRe g ./ D e l e te
list a
list b
list clist d
file 1
file 2Re g i ste r Re ca l l
( Full-Color )
Pr i nter
Me n uCa nce l
Ready to pr int.
GO
Select scanner function.
Send
Database
Connecti onScan...

2-1
2 Preparation for Usage
This chapter explains the preparations required before using the machine.
• Loading Paper...2-2
• Setting Paper Type and Size for the Cassettes and MP Tray...2-7
• Placing Originals...2-16
• Language...2-20
• Connecting Cables...2-21
• Preparing the Printer...2-22
• Preparing the Scanner...2-26
Downloaded From ManualsPrinter.com Manuals 

Preparation for Usage
2-2
Loading Paper
How to load paper in the 2 cassettes, the MP tray, and/or the optional paper feeder or 3000 sheet 
paper feeder. 
Before Loading Paper
When you open a new package of paper, fan through the sheets to separate them slightly prior to 
loading as described below.
1Bend the stack of paper so that the 
middle of the paper lifts upwards. 
2Gripping both ends of the paper, push 
inward to cause the stack of paper to 
fluff up. 
3Introduce air into the stack of paper by...

Preparation for Usage
2-3
1Pull the cassette out toward you until it stops. 
2Adjust the paper length guide to fit the paper size. 
NOTE: Paper sizes are marked on the cassette.
3Holding the paper width adjusting tab both ends, move 
the paper width guide to fit the paper.
NOTE: Paper sizes are marked on the cassette.
When loading paper smaller than 11 × 8
1/2 or A4 into 
Cassette 1, raise the support lever as shown in the 
illustration. 
4Align the paper flush against the left side of the 
cassette as...

Preparation for Usage
2-4
IMPORTANT: Verify that the paper is pressed snugly 
against the vertical and horizontal size guides. If a gap 
is present, reset the width guide or length guide. 
Overloading may cause paper jams.
Before loading the paper, be sure that it is not curled 
or folded. Overloading may cause paper jams.
Ensure that the loaded paper does not exceed the 
level indicated. Overloading may cause paper jams.
5Insert the appropriate paper size card in the slot to 
indicate the size of the...

Preparation for Usage
2-5
NOTE: Before loading the paper, be sure that it is not 
curled or folded. Curled or folded paper may cause 
paper jams. 
Ensure that the loaded paper does not exceed the 
level indicated.
3Gently push the cassette back in all the way.
Loading Paper in the MP Tray
In addition to standard and recycled paper, special paper (60 - 220 g/m2) may be loaded. 100 sheets 
of 11 × 8
1/2 or A4 or smaller size paper (80 g/m2) or 50 sheets of 81/2× 14 or B4 or larger paper 
(80 g/m2) may be...

Preparation for Usage
2-6
2Adjust the sliders to fit the width of the paper. 
3Insert the paper along the sliders into the tray until it 
stops. 
Ensure that the sliders are flush against the edges of 
the paper.
IMPORTANT: Before loading postcards and other 
types of thick paper that may be curled, straighten out 
the paper. The paper may not be fed depending on the 
paper quality.
To print on both the front and back side of the post 
card, be sure to print the back side before printing the 
address...

Preparation for Usage
2-7
Setting Paper Type and Size for the Cassettes and MP Tray
When loading paper into Cassette 1 and 2 and the optional paper feeders (Cassette 3 and 4), set 
the paper size and type. Refer to Specifying Paper Size and Specifying the Paper Type on page2-8 
below.
When loading paper into the optional 3000 sheet paper feeder (Cassette 3), set the paper type. 
Refer to Specifying the Paper Type on page2-8.
After loading paper in the MP tray, specify both the paper type and size. Refer...

Preparation for Usage
2-8
4Press [S] or [T], select the cassette you 
wish to set the paper size from Paper 
size (1st cassette) - Paper size (4th 
cassette) and press [Change #]. 
NOTE: 3rd cassette and 4th cassette are shown when the optional paper feeder or 3000 sheet 
paper feeder have been installed. 
5If [Auto Detection] is selected, choose 
the unit type. If [Standard sizes] is 
selected, choose the paper size. 
Press [Close]. 
6Press [Close]. 
7Press [End]. The display returns to the [Basic]...