Kyocera FS 1370DN User Manual

							Troubleshooting5-13
Paper Cassette/Paper Feeder
1
Pull out the cassette or optional paper feeder.
2Remove any partially fed paper. 
3Push the cassette back in securely. The printer warms up and 
resumes printing.
IMPORTANTDo not try to remove paper that has already been 
partially fed. Proceed to Inside the Printer on page5-15.
NoteCheck to see if paper is loaded correctly. If not, reload 
the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							5-14Troubleshooting
Duplexer
Paper is jammed in the duplexer. Remove the jammed paper using the 
procedure given below.
1Pull the paper cassette all the way out of the printer.
2Open the duplexer’s cover in front of the printer and remove any 
jammed paper.
Open the duplexer’s cover at the rear of the printer and remove any 
jammed paper.
3Push the cassette back in securely, and open and close the top 
cover to clear the error. The printer warms up and resumes printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting5-15
Inside the Printer
1
Pull the paper cassette all the way out of the printer. Remove any 
partially fed paper.
2Open the top cover and front cover, and lift the developer unit 
together with the toner container out of the printer.
3Remove the drum unit from the printer by holding the green levers 
with both hands.
4If the jammed paper appears to be pinched by rollers, pull it along 
the normal running direction of the paper.
IMPORTANTDo not try to remove paper that has already been 
partially fed. Proceed to step 2.
CAUTION  The fuser unit inside the printer is hot. Do not 
touch it, as it may result in burn injury.
NoteThe drum is sensitive to light. Never expose the drum 
unit to light for more than five minutes.
Downloaded From ManualsPrinter.com Manuals 
						

							5-16Troubleshooting
5Return the drum unit to its position, aligning the guides at both ends 
with the slots in the printer.
6Insert the developer unit together with the toner container, back into 
the machine. Close the top cover and the front cover. The printer 
warms up and resumes printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting5-17
Rear Cover
1
Open the rear cover and remove the jammed paper by pulling it out.
If the paper is jammed inside the fuser unit, open the fuser cover and 
remove the paper by pulling it out.
2Close the rear cover, and open and close the top cover to clear the 
error. The printer warms up and resumes printing.
CAUTION  The fuser unit inside the printer is hot. Do not 
touch it, as it may result in burn injury.
Downloaded From ManualsPrinter.com Manuals 
						

							5-18Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix6-1
6Appendix
This section lists the following information of this printer.
Specifications 6-2
Environmental Standard Requirements 6-4
Downloaded From ManualsPrinter.com Manuals 
						

							6-2Appendix
Specifications
NoteThese specifications are subject to change without notice.
ItemDescription
Ty p e
Desktop
Printing Method
Electrophotography, laser scan
Paper Weight Cassette
60 to 120 g/m² (Duplex: 60 to 105 g/m²)
MP Tray
60 to 220 g/m²
Paper Type Cassette
Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color (Colour), 
Prepunched, High Quality, Custom 1 to 8 
MP Tray
Plain, Transparency, Preprinted, Labels, Bond, Recycled, Rough, Vellum, 
Letterhead, Color (Colour), Prepunched, Envelope, Cardstock, Thick paper, 
High Quality, Custom 1 to 8
Paper Size Cassette
A4, JIS B5, A5, Folio, Legal, Letter, Oficio II, Statement, Executive, A6, B6, ISO 
B5, Envelope C5, 16K, Custom (105 × 148 to 216 × 356mm (4-1/8 × 5-13/16 to 
8-1/2 × 14 inches)
Paper Feeder
A4, JIS B5, A5, Folio, Legal, Letter, Oficio II, Executive, B6, ISO B5, Envelope 
C5, 16K, Custom (148 × 210 to 216 × 356mm (5-13/16 × 8-5/16 to 8-1/2 × 14 
inches)
MP Tray
A4, JIS B5, A5, Folio, Legal, Letter, Oficio II, Statement, Executive, A6, B6, ISO 
B5, Envelope C5, Envelope #10, Envelope #9, Envelope #6-3/4, Envelope 
Monarch, Envelope DL, Hagaki, Ofuku Hagaki, 16K, Yokei 2, Yokei 4, Custom 
(70 × 148 to 216 × 356mm (2-13/16 × 5-13/16 to 8-1/2 × 14 inches)
Magnification ratio
25 to 400 %, 1 % increments
Printing Speed Simplex A4/Letter: 35 ppm/37 ppm
A5: 17 ppm
Duplex A4/Letter: 19 ppm/20 ppm
First Print Time (A4, feed from 
Cassette)7 seconds or less
Warm-up Time 
(22°C/71.6°F, 
60 %RH)Power on
20 seconds or less (120 V AC), 19 seconds or less (230 V AC)
Sleep
15 seconds or less (120 V AC), 14 seconds or less (230 V AC)
Paper Capacity Cassette (1 to 3)
250 sheets (80 g/m², 11 × 8 1/2/A4 or smaller)
MP Tray
50 sheets (80 g/m², 11 × 8 1/2/A4 or smaller)
Output Tray 
CapacitySimplex
250 sheets (80 g/m²)
Duplex
200 sheets (80 g/m²)
Continuous printing
1 to 999 sheets
Resolution Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 dpi
Operating 
EnvironmentTemperature
10 to 32.5°C/50 to 90.5°F
Humidity
15 to 80 %
Altitude
2,500 m/8,202 ft maximum
Brightness
1,500 lux maximum
Downloaded From ManualsPrinter.com Manuals 
						

							Appendix6-3
Controller PowerPC 440F5/500 MHz
Supported OS
Microsoft Windows 2000/XP/Vista/7, Windows  Server 2003/2008
Mac OS X 10.x
Interface Hi-Speed USB: 1
Network: 1 (10BASE-T/100BASE-TX)
KUIO-LV(W) slot: 1
PDL
PRESCRIBE
Emulation PCL 6, KPDL, KPDL (AUTO), Line Printer, IBM Proprinter, DIABLO 630, 
EPSON LQ-850
Memory
Standard128 MB
Maximum1152 MB
Dimension (W × D × H) 375 × 393 × 267 mm
14 3/4 × 15 1/2 × 10 1/2
Weight (without toner container)
12 kg/26.5 lb
Power Requirements
120 V AC, 60 Hz, 8.0 A/220 to 240 V AC, 50/60 Hz, 4.2 A
Power 
Consumption
Maximum925 W (U.S.A./Canada), 987 W (European countries)
During printing584 W (U.S.A./Canada), 553.9 W (European countries)
During standby10.3 W (U.S.A./Canada), 11 W (European countries) when EcoFuser is On.
93.3 W (U.S.A./Canada), 89.3 W (European countries) when EcoFuser is Off.
Sleep mode5.5 W
Power off 0 W
Options
Expanded memory, Paper Feeder (250-sheet × 2)
ItemDescription
Downloaded From ManualsPrinter.com Manuals 
						

							6-4Appendix
Environmental Standard Requirements
This machine conforms to the following environmental standard 
requirements.
•Time for switching to Sleep mode (default): 15 minutes
•Duplex Printing: Standard Equipment
•Durable paper for feeding: Paper made of 100 % recycled paper
NoteContact your dealer or service representative for recommended 
paper types
.
Downloaded From ManualsPrinter.com Manuals