Kyocera FS 1370DN User Manual

							Introduction-xix
If dust accumulates within the machine, there is a danger of fire or 
other trouble. It is therefore recommended that you consult with 
your service representative in regard to cleaning of internal parts. 
This is particularly effective if accomplished prior to seasons of 
high humidity. Consult with your service representative in regard 
to the cost of cleaning the internal parts of the machine.
Other precautions
Do not place heavy objects on the machine or cause other damage to 
the machine.
Do not open the upper front cover, turn off the main power switch, or pull 
out the power plug during printing.
When lifting or moving the machine, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit 
boards. They could be damaged by static electricity.
Do not attempt to perform any operations not explained in this 
handbook.
Use shielded interface cables.
Caution
Use of controls or adjustments or performance of procedures other than 
those specified herein may result in hazardous radiation exposure.
Cautions when Handling Consumables 
Caution
Do not attempt to incinerate the Toner Container. Dangerous 
sparks may cause burns.
Keep the Toner Container out of the reach of children.
If toner happens to spill from the Toner Container, avoid inhalation 
and ingestion, as well as contact with your eyes and skin.
•If you do happen to inhale toner, move to a place with fresh 
air and gargle thoroughly with a large amount of water. If coughing 
develops, contact a physician.
•If you do happen to ingest toner, rinse your mouth out with water and 
drink 1 or 2 cups of water to dilute the contents of your stomach. If 
necessary, contact a physician.
•If you do happen to get toner in your eyes, flush them thoroughly 
with water. If there is any remaining tenderness, contact a physician.
•If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the Toner Container.
Other precautions
After use, always dispose of the Toner Container in accordance with 
Federal, State and Local rules and regulations.
Store all consumables in a cool, dark location.
If the machine will not be used for an extended period of time, remove 
the paper from the cassette, return it to its original package and reseal it.
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction-xx
About the Operation Guide
This Operation Guide contains the following chapters:
1Machine Parts
This chapter explains the names of parts.
2 Loading Paper
This chapter explains paper specifications for this printer and how to 
load paper into the cassette or MP tray.
3Printing
This chapter explains how to install the printer driver, print from your PC, 
and use the application software included in the CD-ROM. 
4 Maintenance
This chapter explains how to replace the toner container and how to care 
for your printer.
5 Troubleshooting
This chapter explains how to handle printer problems that may occur, 
such as paper jams.
6 Specifications
This chapter lists the specifications of this printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction-xxi
Conventions in This Guide
This manual uses the following conventions.
ConventionDescriptionExample
Italic 
TypefaceUsed to emphasize a key word, 
phrase or reference to additional 
information.Refer to Print Quality Problems on page 
5-3.
BoldUsed to denote buttons on the 
software.To start printing, click OK.
Bracket BoldUsed to denote operation panel 
keys.
Press [GO] to resume printing.
NoteUsed to provide additional or 
useful information about a 
function or feature.NoteDo not remove the toner 
container from the carton until you 
are ready to install it in the printer.
ImportantUsed to provide important 
information.
IMPORTANTTake care not to touch 
the transfer roller (black) during 
cleaning.
CautionCautions are statements that 
suggest mechanical damage as 
a result of an action.CAUTION  When pulling the paper, pull 
it gently so as not to tear it. Torn pieces 
of paper are difficult to remove and may 
be easily overlooked, deterring the 
paper jam recovery.
WarningUsed to alert users to the 
possibility of personal injury.WARNINGIf you ship the printer, 
remove and pack the developer unit 
and drum unit in a plastic bag and ship 
them separately from the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Introduction-xxii
Downloaded From ManualsPrinter.com Manuals 
						

							Machine Parts1-1
1Machine Par ts
This chapter identifies machine parts and operation panel keys.
Components at the Front of the Printer 1-2
Components at the Rear of the Printer 1-2
Operation Panel 1-3
Downloaded From ManualsPrinter.com Manuals 
						

							1-2Machine Parts
Components at the Front of the Printer
1Top Cover
2Paper Stopper
3Top Tray
4Operation Panel
5USB Memory Slot
6Right Cover
7Paper Cassette
8Front Cover
9MP Tray
10Subtray
Components at the Rear of the Printer
11Network Interface Connector
12USB Interface Connector
13Rear Cover
14Power Cord Connector
15Power Switch
1234
6
7
8 9
105
11
14 12
15 13
Downloaded From ManualsPrinter.com Manuals 
						

							Machine Parts1-3
Operation Panel
1Indicators
2Message Display
3Cursor Keys
4[GO] Key
5 [Cancel] Key
6[OK] Key
7 [MENU] Key
21
3
4
5 67
Downloaded From ManualsPrinter.com Manuals 
						

							1-4Machine Parts
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Paper2-1
2Loading Paper
This chapter explains how to load paper into the cassette or MP tray.
Preparing the Paper 2-2
Loading Paper into Cassette 2-2
Loading Paper into MP (Multi-Purpose) Tray 2-5
Downloaded From ManualsPrinter.com Manuals 
						

							2-2Loading Paper
Preparing the Paper
After removing paper from the packaging, fan through the sheets to 
separate them prior to loading.
If using paper that has been folded or is curled, straighten it prior to 
loading. Failure to do so may result in a paper jam.
Loading Paper into Cassette
250 sheets of 11 × 8 1/2 or A4 paper (80 g/m²) may be loaded into the 
Cassette. 
1Pull the cassette completely out of the printer.
2Adjust the position of the width guides located on the left and right 
sides of the cassette. Press the release button on the left guide and 
slide the guides to the paper size required.
IMPORTANTEnsure paper is not stapled and clips are removed.
IMPORTANTWhen pulling the cassette out of the printer, ensure 
it is supported and does not fall out.
NotePaper sizes are marked on the cassette.
Downloaded From ManualsPrinter.com Manuals