Kyocera FS 1116 User Manual

							Troubleshooting 
OPERATION GUIDE10-7
2Open the Scan Unit.
3Open the Front Cover.
4Lift the Developer Unit together with the 
Toner Container out of the printer.
5Using the green handles lift the Drum Unit 
out of the machine.
NOTE: The Drum Unit is sensitive to light. 
Never expose the Drum Unit to light for 
more than five minutes.
6If the jammed paper appears to be pinched 
by rollers, pull it along the normal running 
direction of the paper.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting 
10-8OPERATION GUIDE If it has not be fed as far as the metal 
registration roller, remove the paper from 
the Manual Feed Tray side.
7Return the Drum Unit to its position, aligning 
the guides at both ends with the slots in the 
printer. 
8Insert the Developer Unit together with the 
Toner Container, back into the machine.
9Close the Front Cover.
10Close the Scan Unit pushing the Lever.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting 
OPERATION GUIDE10-9
IMPORTANT: Take care not to place your 
fingers between the scan unit and the main 
body when the scan unit is closed. 
11Reload the Manual Feed Tray.
Inside Machine
1Open the Scan Unit.
2Open the Front Cover.
3Lift the Developer Unit together with the 
Toner Container out of the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting 
10-10OPERATION GUIDE
4Using the green handles lift the Drum Unit 
out of the machine.
NOTE: The Drum Unit is sensitive to light. 
Never expose the Drum Unit to light for 
more than five minutes.
5Remove the paper from the machine.
NOTE: If the jammed paper appears to be 
pinched by rollers, pull it along the normal 
running direction of the paper.
6Return the Drum Unit to its position, aligning 
the guides at both ends with the slots in the 
machine. 
7Insert the Developer Unit together with the 
Toner Container, back into the machine.
8Close the Front Cover.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting 
OPERATION GUIDE10-11
9Close the Scan Unit pushing the Lever.
IMPORTANT: Take care not to place your 
fingers between the scan unit and the main 
body when the scan unit is closed. 
Document Processor
1Remove all of the originals from the Original 
Table.
2Open the Left Cover of the document 
processor.
3Remove the jammed original.
If the original is caught in the rollers or 
difficult to remove, proceed to the next step.
Downloaded From ManualsPrinter.com Manuals 
						

							Troubleshooting 
10-12OPERATION GUIDE
4Remove the jammed original.
5Close the Left Cover.
6Place the originals.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDE11-1
11 Specifications
NOTE: Specifications are subject to change without notice.
Main Body
Item Specification
Printing system Electro-photographic
Originals Sheets of paper, books and 3-dimensional objects
Copy sizes
Cassette A4, B5 (JIS), A5, Folio, Legal, Letter, Oficio II
Manual Feed Tray A4, B5 (JIS), A5, Folio, Legal, Letter, Oficio II, 
Statement, Executive, A6, B6, B5 (ISO), Envelope 
#10, Envelope #9, Envelope Monarch, Envelope #6, 
Envelope C5, Envelope DL, 16K
Paper Types
Cassette
Plain paper, recycled paper, thick paper 60 to 105g/m
2
Manual Feed Tray
Plain paper, recycled paper, thick paper 60 to 163g/m2
Transparency, envelopes and post cards supported
Paper feed source capacity
Cassette 250 sheets
Manual Feed Tray 1 sheet
Output Tray Capacity 100 sheets (face-down)
Warm-up time 25 seconds or less
Memory FS-1016MFP: 32MB
FS-1116MFP: 64MB
Ambient conditions
Temperature 10 to 32.5°C
Humidity 20 to 80%RH
Altitude Maximum 2,000m
Illumination 1,500lux or less
Power source 120V AC, 60Hz, 8.2A
220 to 240V AC, 50/60Hz, 3.9A
Dimensions (W) × (D) × (H) 476 × 392 × 489mm
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications 
11-2OPERATION GUIDE
Copying Functions
Printing Functions
Weight Approx. 15kg
Required space (W) × (D) 479 × 437mm
Item Specification
Copying speed
Platen (1:1) A4: 16copies/min.
A5: 10copies/min.
B5: 14copies/min.
Letter: 17copies/min.
Document Processor 
(1:1)A4: 12copies/min.
A5: 10copies/min.
B5: 14copies/min.
Letter: 13copies/min.
Legal: 11copies/min.
First copy (1:1, Letter/A4)
Platen
12 ±0.5 seconds
Document Processor
14 ±0.5 seconds
Resolution
Scanning and Printing 600 × 600dpi
Continuous copying 1 to 99sheets
Zoom ratios Any 1% increment between 25 and 400%
Item Specification
Printing speed A4 16 pages per minute / Letter 17 pages per minute
First print 11 seconds or less
Resolution 600 × 600dpi
Host Interface USB: 1 port (Hi-speed USB)Item Specification
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications 
OPERATION GUIDE11-3
Scanning Functions
Document Processor
Environmental Specifications
Item Specification
Scanning Speed
   (1:1, A4, 300dpi) Monochrome: 5scan/min.
Full Color or Grayscale: 5scan/min. (TWAIN), 4scan/
min. (QLINK)
Resolution 600 × 300dpi
Color mode Full Color: 24bit/dot (each color) Grayscale: 8bit/dot
Monochrome: 1bit/dot
File format PDF, TIFF, JPEG (8-Bit Gray mode, 24-Bit Color  mode), BMP
Host Interface USB (TWAIN): 1 port (Hi-speed USB)
Item Specification
Original feed system Automatic feeding
Originals Sheets of paper
Original sizes Maximum: Legal Minimum: Statement and A5R
Original paper weight 60 to 105g/m²
Maximum number of 
originals 50
Item Specification
Duplex copying Manual
Paper feed Recycled paper made from 100% recycled pulp may  be used with this product.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications 
11-4OPERATION GUIDE
Optional Equipment
Print Server (IB-110)
The print server (IB-110) provides an optimal printing network 
for Kyocera printers and copiers so that all users on the network 
can take advantage of them. The included utility, Virtual Link 
enables you to utilize the MFP’s scanning function.
The print servers USB interface offers easy external 
connections. Our original utility simplifies configuring your 
Ethernet network to offer printing to users.
Using Print Server (IB-110)
When the Print Server (IB-110) is connected, perform the following procedure. 
Connect and set up the machine, refer to the Print Servers Set up Guide.
Loading Software
1Follow steps 1 to 8 of Loading Software on page 3-2.
2Select Custom Mode and click Next.
3Select Network connection and click Next.
4Select KMPrint Port and click Next.
5Select your printer and click Next.
6Click Select All and click Next. 
7Enter the name of the printing system and click Next.
8Click Add Port. The KMprint Add Port Wizard window is displayed.
9Enter the IP address or host name and click Next.
NOTE: Click Search to search available printers within the network, and select it.
10Enter the Destination Printer Port Name and click Next. 
11Click Finish. 
12Select the printer port and click Next.
13Click Install. The installation program installs the software.
14When the installation is complete, the Installation Completed window is displayed. 
Click Finish to leave the install program and return to the disc main menu.
Downloaded From ManualsPrinter.com Manuals