Kyocera FS 1116 User Manual

							Loading Paper 
OPERATION GUIDE2-5 Envelopes should be fed in the face-up 
position, right edge first.
NOTE: Prior to purchasing envelopes, 
print a sample to check quality.
IMPORTANT: Slide the paper firmly into the 
tray until it stop.
Load one sheet or envelope at a time.
Start printing after loading the Manual Feed Tray.
6After use, move the width guides fully outwards and close the Manual Feed Tray.
NOTE: For further information about the sizes and types of media that can be 
used, refer to Specifications on page 11-1.
7Pull out the paper stopper.
Manual Duplex
Use Manual Duplex if you require printing on both sides of the paper. For Manual 
Duplex, load one sheet on the Manual Feed Tray at a time.
1Load one sheet on the Manual Feed Tray in 
the face-up position and print the front side 
first.
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Paper 
2-6OPERATION GUIDE
2Load the printed sheet in the printed face-down position on the Manual Feed Tray 
again, and print the rear side.
Long edge binding or Short edge binding can be selected depending on the 
orientation of the sheet. 
Selecting Paper Size
After loading paper, you need register the paper size.
The paper size that can be used are: A4, Letter, Legal, A5, B5, OfficioII, 
Executive, Statement, Folio, B6, A6, ISO B5, Envelope C5, 
Envelope #10, Envelope DL, Envelope #9, Monarch, Envelope #6, 16K
1Access 12. Paper Size.
If you are unsure how to use this route map refer to Accessing Menu Items on 
page xx.
2Press W or X to select the paper size and press [OK]. The display returns to 
the ready screen. Binding Orientation How to Load
Long Edge Binding
Short Edge Binding
[Menu]
W or X
1. Common Setup
[OK]
W or X
12. Paper Size
[OK]
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Paper 
OPERATION GUIDE2-7
Selecting Media Type
You can select the media type.
The media type that can be used are: PLAIN, TRANSP., PREPRINT, BOND, 
RECYCLED, VELLUM, ROUGH, LETTERHD, COLOR, PREPUNCH, ENVELOPE, 
CARDSTOCK, COATED, THICK, HIGH QLT, CUSTOM
1Access 15.Media Type.
If you are unsure how to use this route map refer to Accessing Menu Items on 
page xx.
2Press W or X to select the media type and press [OK]. The display returns to 
the ready screen. [Menu]
W or X
1. Common Setup
[OK]
W or X
15.Media Type
[OK]
Downloaded From ManualsPrinter.com Manuals 
						

							Loading Paper 
2-8OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDE3-1
3 Preparations
Connecting the Cables
The machine can be connected to a computer.
Connecting the USB Cable
To connect the machine directly to your computer, use the USB cable.
1Turn the machine off, remove the power 
cord from the outlet and turn the computer 
off.
2Connect the USB cable to the USB interface 
connector located at the rear side of the 
machine.
3Connect the other end of the USB cable to the USB interface connector on your 
computer.
Connecting the Power Cord
Connect the power cord to the rear of the 
machine. Connect the other end to a 
suitable power outlet.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparations 
3-2OPERATION GUIDE
Turning the Machine On
Turn the power switch on. The machine will 
begin to warm up after which the ready 
screen is displayed.
Loading Software
Installing the Printer Driver and Scanner Driver.
Ensure the machine is plugged in and connected to the computer’s USB port before 
installing software from the CD-ROM.
Required operating systems (OS) for using the Software:
Microsoft Windows 98SE/Me/2000/XP
Examples of the operations given in this guide are for the Windows XP. Essentially 
the same operations 
are used for Windows 98SE/Me/2000 environments.
1Switch on the PC and activate Windows.
NOTE: If the Welcome to the Found New 
Hardware Wizard dialog box displays, 
select Cancel.
2Insert the CD-ROM (Product Library) into 
the CD-ROM drive. Once the installation 
program launches, the License Agreement 
Notice is displayed.
NOTE: If the installation program fails to launch, use Windows Explorer to access 
the CD-ROM and double-click Setup.exe.
3Click View License Agreement to display and read it.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparations 
OPERATION GUIDE3-3
4Click Accept to proceed.
5Click Select Language.
6Click the language to be used.
7Click Install Software. The Installation 
Wizard starts.
8Click Next.
9For the simple, default installation, select 
Express Mode and click Next.
NOTE: If you selected Custom Mode, 
select Universal serial bus (USB) to select 
the 
connection method, and follow the on-
screen instructions. For details, refer to Custom 
Installation on page 3-4.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparations 
3-4OPERATION GUIDE
10Click Install. The installation program 
installs the software.
NOTE: When installing software for 
Windows XP, if a software installation 
warning for an unsigned device 
driver is 
displayed, click Continue Anyway to bypass the 
warning and install the driver. All device drivers 
have been fully tested.
11When the installation is complete, the Installation Completed window is displayed. 
Click Finish to leave the install program and return to the disc main menu.
Custom Installation
The Custom Mode is the user selection mode and can be customized the install 
options.
1Follow steps 1 to 8 of Loading Software on page 3-2.
2Select Custom Mode and click Next.
3Select Universal serial bus (USB) and click NEXT.
4Select the software packages you wish to install, and clear the ones you do not want 
installed.
5Click Next. 
6Click Install. The installation program installs the software.
7When the installation is complete, the Installation Completed window is displayed. 
Click Finish to leave the install program and return to the disc main menu.
Remove Software
When you fail in the installation of Software, please uninstall it once.
1Follow steps 1 to 6 of Loading Software on page 3-2.
2Click Remove Software.
3Select the software packages you wish to uninstall, and click Uninstall.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparations 
OPERATION GUIDE3-5
4Click Next.
5Click Finish to leave the install program and return to the disc main menu.
Downloaded From ManualsPrinter.com Manuals 
						

							Preparations 
3-6OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals