Konica Minolta magicolor 4650EN User Manual
Have a look at the manual Konica Minolta magicolor 4650EN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 37 PAPER MENU With this menu, the paper used for printing can be managed. PAPER TYPE DEFAULT TRAY TRAY 1PAPER SIZE CUSTOM SIZE* TRAY 2 PAPER TYPE PAPER SIZE TRAY 3*** PAPER SOURCE COLLATE***** DUPLEX**** COPIES PAPER TYPE PAPER SIZE PAPER MENU TRAY CHAINING TRAY MAPPING LOGICAL TRAY 0 TRAY MAPPING MODE LOGICAL TRAY 9 CUSTOM SIZE** Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 38 * This menu item appears only when you select CUSTOM from the TRAY 1/PAPER SIZE menu. **This menu item appears only when you select CUSTOM from the TRAY 2/PAPER SIZE menu. *** This menu item appear only if the optional lower feeder unit is installed. **** This menu item appears only magicolor 4650DN. ***** This menu item appears only if an optional hard disk kit or a CompactFlash card of 1 GB or more is installed. All factory default values are shown in bold. PAPER SOURCEDEFAULT TRAYSettingsTRAY1/TRAY2/TRAY3 Select the setting for the default tray. TRAY 3 appears only if the optional lower feeder unit is installed. TRAY 1 PAPER SIZESettingsANY/LETTER/LEGAL/ EXECUTIVE/A4/A5/A6/ B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/ FOLIO/SP FOLIO/UK QUARTO/FOOLSCAP/GOVT LEGAL/16K/PHOTO 4×6/ KAI 16/KAI 32/ENV C6/ ENV DL/ENV MONARCH/ ENV CHOU#3/ENV CHOU#4/B5(ISO)/ENV #10/JPOST/JPOST-D/ CUSTOM Select the setting for the size of paper loaded into Tray 1. The default setting for North America is LETTER. The default setting for all other regions is A4. Depending on the setting selected for SYS DEFAULT MENU/ PAPER/UNIT OF MEASURE , PHOTO 4×6 may change to PHOTO 10×15. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 39 CUSTOM SIZESpecify the paper size when custom-sized paper is loaded into Tray 1. The setting units can be switched between millimeters and inches with the SYS DEFAULT MENU/PAPER/UNIT OF MEASURE setting. Setting range for WIDTH „For MILLIMETERS: 92 to 216 mm (default) –North America: 216 mm –All other regions: 210 mm „For INCHES: 3.63 to 8.50 inches (default) –North America: 8.50 inches –All other regions: 8.26 inches Setting range for LENGTH „For MILLIMETERS: 148 to 356 mm (default) –North America: 279 mm –All other regions: 297 mm „For INCHES: 5.83 to 14.00 inches (default) –North America: 11.00 inches –All other regions: 11.69 inches This menu item appears only if PAPER SIZE is set to CUSTOM. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 40 PAPER TYPESettingsANY/PLAIN PAPER/ RECYCLED/THICK 1/ THICK 2/LABEL/ TRANSPARENCY/ ENVELOPE/POSTCARD/ LETTERHEAD/GLOSSY 1/ GLOSSY 2 Select the setting for the type of paper loaded into Tray 1. TRAY 2 PAPER SIZESettingsANY/LETTER/EXECUTIVE/ A4/A5/A6/ B5(JIS)/B6(JIS)/GOVT LETTER/STATEMENT/UK QUARTO/16K/PHOTO 4×6/ KAI 16/KAI 32/CUSTOM Select the setting for the size of paper loaded into Tray 2. The default setting for North America is LETTER. The default setting for all other regions is A4. Depending on the setting selected for SYS DEFAULT MENU/ PAPER/UNIT OF MEASURE, PHOTO 4×6 may change to PHOTO 10×15. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 41 CUSTOM SIZESpecify the paper size when custom-sized paper is loaded into Tray 2. The setting units can be switched between millimeters and inches with the SYS DEFAULT MENU/PAPER/UNIT OF MEASURE setting. Setting range for WIDTH „For MILLIMETERS: 92 to 216 mm (default) –North America: 216 mm –All other regions: 210 mm „For INCHES: 3.63 to 8.50 inches (default) –North America: 8.50 inches –All other regions: 8.26 inches Setting range for LENGTH „For MILLIMETERS: 148 to 297 mm (default) –North America: 279 mm –All other regions: 297 mm „For INCHES: 5.83 to 11.69 inches (default) –North America: 11.00 inches –All other regions: 11.69 inches This menu item appears only if PAPER SIZE is set to CUSTOM. PAPER TYPESettingsANY/PLAIN PAPER/ RECYCLED Select the setting for the type of paper loaded into Tray 2. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 42 TRAY 3 PAPER SIZEThe size of paper loaded in Tray 3 is indicated. This menu item only shows the current setting. This setting cannot be changed. PAPER TYPESettingsANY/PLAIN PAPER/ RECYCLED Select the setting for the type of paper loaded into Tray 3. TRAY CHAININGSettingsON/OFF If ON is selected and the specified tray runs out of paper during printing, a tray loaded with paper of the same size is automatically selected so printing can continue. If OFF is selected and the specified tray runs out of paper, printing stops. TRAY MAPPINGTRAY MAPPING MODESettingsON/OFF Select whether or not the Tray Mapping function is used. LOGICAL TRAY 0-9SettingsPHYSICAL TRAY1/ PHYSICAL TRAY2/ PHYSICAL TRAY3 Select the tray that is used for printing when a print job is received from another manufacturer’s printer driver. The default setting for LOGICAL TRAY 1 is PHYSICAL TRAY1. The default setting for all other trays is PHYS- ICAL TRAY2 . PHYSICAL TRAY3 appears only if an optional lower feeder unit is installed. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 43 DUPLEXSettingsOFF/LONG EDGE/SHORT EDGE If LONG EDGE is selected, the pages will be printed on both sides of the paper for long-edge binding. If SHORT EDGE is selected, the pages will be printed on both sides of the paper for short-edge binding. The setting specified in the printer driver will override this menu setting. For magicolor 4650DN only COPIESSettings1-9999 Specify the number of copies to be printed. The setting specified in the printer driver will override this menu setting. COLLATESettingsON/OFF If ON is selected, all pages of the document are printed before the next copy is printed. If OFF is selected, all copies of the document are not printed separately. The setting specified in the printer driver will override this menu setting. This menu item appears only if an optional hard disk kit or a CompactFlash card of 1GB or more is installed. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 44 QUALITY MENU With this menu, settings for the print quality can be specified. TEXT PRINTING COLOR MODE BRIGHTNESS HALFTONE QUALITY MENU IMAGE PRINTING GRAPHICS PRINTING IMAGE PRINTING PCL SETTINGCONTRAST TEXT PRINTING EDGE ENHANCEMENTIMAGE PRINTING GRAPHICS PRINTING EDGE STRENGTH ECONOMY PRINT RGB SOURCE RGB INTENT RGB GRAY Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 45 TEXT PRINTINGRGB SOURCE RGB INTENT RGB GRAY PS SETTINGIMAGE PRINTINGRGB SOURCE RGB INTENT RGB GRAY DESTINATION PROF GRAPHICS PRINTINGRGB SOURCE RGB INTENT RGB GRAY TEXT PRINTINGRGB SOURCE RGB INTENT RGB GRAY DESTINATION PROF GRAPHICS PRINTINGRGB SOURCE RGB INTENT RGB GRAY DESTINATION PROF Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 46 All factory default values are shown in bold. COLOR MODESettingsCOLOR/GRAYSCALE If COLOR is selected, the pages are printed in full color. If GRAYSCALE is selected, the pages are printed in black and white. BRIGHT- NESSSettings-15%/-10%/-5%/0%/+5%/+10%/ +15% The brightness of the printed image can be adjusted. HALFTONE IMAGE PRINTINGSettingsLINE ART/DETAIL/ SMOOTH Select how halftones in images are reproduced. If LINE ART is selected, halftones are reproduced with high precision. If DETAIL is selected, halftones are reproduced with detail. If SMOOTH is selected, halftones are reproduced with smoothness. SIMULATION PROF SIMULATION INTENT CMYK GRAY SIMULATION TONE CALIBRATION AIDC PROCESS CALIBRATION COLOR SEPARATION CMYK DENSITY BLACK CYAN MAGENTA YELLOW Downloaded From ManualsPrinter.com Manuals