Konica Minolta magicolor 2550DN User Manual
Here you can view all the pages of manual Konica Minolta magicolor 2550DN User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 61
Configuration Menu Overview 47 PCL LINE TERMI- NATIONSettingsCR=CR LF=CRLF/ CR=CR LF=LF/ CR=CRLF LF=LF/ CR=CRLF LF=CRLF Select the definitions of the CR/LF codes in the PCL language. FONT PITCH SIZESettings44-1000-9999 Specify the bitmap font size in the PCL language. FONT NUMBERSettings0-32767 Specify the font used with the PCL language. The font numbers that appear correspond to the PCL font list. For details on printing the font list, refer to “PRINT MENU” on page 32. POINT...
Page 62
Configuration Menu Overview 48 SYSSTARTSettingsNO/YES Select whether or not the PostScript format definitions file is applied when the printer is turned on. If YES is selected, the PostScript format definitions file is applied. If NO is selected, the PostScript format definitions file is not applied. DATE & TIMESettingsyyyymmdd:hhmmss Set the date and time on the hard disk’s time-of-day (TOD) clock. The settings appear in the following order: year, month, day:hour, minutes, seconds. ENERGY...
Page 63
Configuration Menu Overview 49 SECU- RITYCONFIG ENABLESettingsOFF/ON Select whether or not the menus are protected with a password. If ON is selected, all menus are protected with a password. SET PASS- WORDSettingsSYSADMIN Specify the password for displaying the menus. The specified password is applied only if SECURITY/CONFIG/ ENABLE is set to ON. The password can contain a maximum of 16 characters. CAP- TURE PRT JOBSettingsOFF/ON/PRINT Select whether or not received print jobs are saved on...
Page 64
Configuration Menu Overview 50 SERVICE MENU With this menu, the service representative can adjust the printer and perform maintenance operations. This menu cannot be used by the user. LANGUAGE MENU RESTORE /SAVERESTORE FACTORYSettingsNO /YES Select whether or not all menu items are reset to their initial settings. If YES is selected, all menu items are reset to their initial settings. SAVE CUSTOMSettingsNO /YES Select whether or not all changed menu settings are saved. If YES is selected, all...
Page 66
Media Specifications 52 Media Specifications What types and sizes of media can I load? !For custom sizes, use the printer driver to specify the settings within the ranges shown in the above table. Media Media Size Tray* Duplex Inch Millimeter A4 8.2 x 11.7 210.0 x 297.0 1/2 Yes A5 5.9 x 8.3 148.0 x 210.0 1 No B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1 No B5 (ISO) 6.9 x 9.8 176.0 x 250.0 1 No Executive 7.25 x 10.5 184.0 x 267.0 1 No Folio 8.3 x 13.0 210.0 x 330.0 1 Yes Foolscap 8.0 x 13.0 203.2 x 330.2 1...
Page 67
Media Types 53 Media Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality. Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to printer.konicaminolta.com. Plain Paper Use plain paper that is #Suitable for plain paper laser printers, such as standard or recycled office paper. Note Do not use the media types listed below. These could cause poor print quality,...
Page 68
Media Types 54 !Keep media between 35% and 85% relative humidity. Toner does not adhere well to moist or wet paper. #Layered #Adhesive #Folded, creased, curled, embossed, warped, or wrinkled #Perforated, three-hole punched, or torn #Too slick, too coarse, or too textured #Different in texture (roughness) on the front and back #Too thin or too thick #Stuck together with static electricity #Composed of foil or gilt; too luminous #Heat sensitive or cannot withstand the fusing temperature (180°C...
Page 69
Media Types 55 DO NOT use thick stock that is #Mixed with any other media in the trays (as this will cause printer misfeed- ing) Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these lay- ered regions may be lost or faded. Use envelopes that are #Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps !Because the envelopes pass...
Page 70
Media Types 56 Labels A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: #The face sheet must follow the plain paper specification. #The face sheet surface must cover the entire carrier sheet, and no adhe- sive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one...