Konica Minolta magicolor 2550DN User Manual

Configuration Menu Overview 37
TRAY 
CHAININGSettingsYES/NO
If YES is selected and the specified paper tray runs 
out of paper during printing, a paper tray loaded with 
paper of the same size is automatically selected so 
printing can continue.
If 
NO is selected and the specified paper tray runs 
out of paper, printing stops.
MAP MODESettingsON/OFF
Select whether or not the Tray Mapping 
function is used.
LOGI-
CAL 
TRAY 
0-9SettingsPHYSICAL TRAY 1/ 
PHYSICAL TRAY 2
Specify whether jobs received from...

Configuration Menu Overview 38
QUALITY MENU
With this menu, settings for the print quality can be specified.
BLACK
CYAN
MAGENTA
TONER OUT ACTION
REPLACE TONER
AIDCREQUEST AIDC
QUALITY MENU
YELLOW
BLACK
CYAN
MAGENTA
YELLOW
DENSITY CONTROL
MODE
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 39
!All factory default values are shown in bold.
REPLACE 
TONERBLACKSettingsYES
/NO
When YES is selected, the carousel rotates to the 
black toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to 
“Replacing a Toner Cartridge” on page 82.
CYANSettingsYES
/NO
When YES is selected, the carousel rotates to the 
cyan toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to 
“Replacing a Toner...

Configuration Menu Overview 40
DENSITY 
CONTROLBLACKSettings1/2/3
/4/5
Adjust the density of the black toner to one of five 
levels.
If 
1 is selected, the density is at its lightest level. If 5 
is selected, the density is at its darkest level.
CYANSettings1/2/3
/4/5
Adjust the density of the cyan toner to one of five 
levels.
If 
1 is selected, the density is at its lightest level. If 5 
is selected, the density is at its darkest level.
MAGENTASettings1/2/3
/4/5
Adjust the density of the magenta toner...

Configuration Menu Overview 41 INTERFACE MENU
With this menu, interface settings can be specified.
!Restart the printer after changing settings in the ETHERNET menu.
IP ADDRESS
DEFAULT ROUTER
SUBNET MASK
FRAME TYPE
NAME
TCPIPENABLE
DHCP/BOOTP
IPX/SPX
ETHERTALK
ETHERNET SPEED
ETHERNET
INTERFACE MENU
ENABLE HTTP
ENABLE AUTO IP
NETZONE
NETZONE2
NAME2
PS PROTOCOL
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 42
!All factory default values are shown in bold.
ETHER-
NETTCPIP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is selected, TCP/IP is disabled.
DHCP/
BOOTPSettingsYES/NO
Select whether or not the IP address is 
automatically acquired.
If 
YES is selected, the IP address is auto-
matically acquired.
If 
NO is selected, the IP address is not 
automatically acquired.
IP 
ADDRESSSetting192.168.1.2
Set the IP address for this printer on the 
network.
Use the...

Configuration Menu Overview 43
SUBNET 
MASKSetting0.0.0.0
Specify the subnet mask for the network. 
Use the Up, Down, Left, and Right keys 
to specify the value.
ENABLE 
HTTPSettingYES/NO
Specify whether or not HTTP is used.
If 
YES is selected, the Web page pro-
vided to the printer by the built-in HTTP 
server is enabled.
If 
NO is selected, the Web page cannot 
be used.
ENABLE 
AUTO 
IPSettingYES/NO
Select whether or not the IP address is 
automatically acquired when DHCP/
BOOTP and PING, ARP are not...

Configuration Menu Overview 44
NET
ZONESettings✱
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum 
of 16 characters.
NET
ZONE2Settings-
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum 
of 16 characters.
ETHERNET 
SPEEDSettingsAUTO/100 FULL DUPLEX/
100 HALF DUPLEX/
10 FULL DUPLEX/
10 HALF DUPLEX
Specify the transmission speed for the network and 
the transmission method for bi-directional 
transmission.
PS 
PROTOCOLSettingsBINARY/QUOTED BINARY
Select...

Configuration Menu Overview 45 SYSTEM DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the time until the machine enters Energy Saver mode.
PRINT QUALITY
EMULATIONSDEFAULT
AUTO DEFAULT
ERROR PAGE
PCLLINE TERMINATION
FONTPITCH SIZE
FONT NUMBER
POINT SIZE
SYMBOL SET
STARTUP OPTIONSSTART PAGE
DATE & TIME*
ENERGY SAVER
SYSTEM DEFAULT
COLOR MODE
POSTSCRIPT
SYSSTART*
ENERGY SAVER MGT**
SECURITYCONFIGENABLE
SET PASSWORD
Downloaded From ManualsPrinter.com...

Configuration Menu Overview 46
!* These menu items appear only if an optional hard disk is installed.
** This menu item appears only on 120 V units.
!All factory default values are shown in bold.
PRINT 
QUAL-
ITYSettingsHIGH/STANDARD
Select the image quality for prints.
COLOR 
MODESettingsCOLOR/GRAYSCALE
Specify whether printing is in full color or grayscale.
EMULA-
TIONSDEFAULTSettingsAUTOMATIC/POSTSCRIPT/PCL5/
PCL XL/HEX DUMP/PDF
Specify the printer control language.
If 
AUTO is selected, the printer...