Konica Minolta magicolor 1690MF User Manual
Have a look at the manual Konica Minolta magicolor 1690MF User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 2-54 Downloaded From ManualsPrinter.com Manuals
3Media Handling Downloaded From ManualsPrinter.com Manuals
Print Media 3-2 Print Media Specifications Media Media Size Tray* Duplex Copy Print FAX Inch Millimeter A4 8.2 x 11.7 210.0 x 297.0 1/2 Yes Yes Yes Yes B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1 No Yes Yes No A5 5.9 x 8.3 148.0 x 210.0 1 No Yes Yes No Legal 8.5 x 14.0 215.9 x 355.6 1 No Yes (ADF)Ye s Ye s Letter 8.5 x 11.0 215.9 x 279.4 1/2 Yes Yes Yes Yes Statement 5.5 x 8.5 139.7 x 215.9 1 No Yes Yes No Executive 7.25 x 10.5 184.2 x 266.7 1 No Yes Yes No Folio 8.25 x 13.0 210.0 x 330.0 1 No Yes (ADF)Ye s N o Letter Plus 8.5 x 12.69 215.9 x 322.3 1 No No Yes No UK Quarto 8.0 x 10.0 203.2 x 254.0 1 No No Yes No Foolscap 8.0 x 13.0 203.2 x 330.2 1 No No Yes No Government Legal 8.5 x 13.0 215.9 x 330.2 1 No Yes (ADF)Ye s N o B5 (ISO) 6.9 x 9.8 176.0 x 250.0 1 No No Yes No Envelope DL 8.7 x 4.3 220.0 x 110.0 1 No Yes Yes No Envelope C6 6.4 x 4.5 162.0 x 114.0 1 No Yes Yes No J-Postcard 3.9 x 5.8 100.0 x 148.0 1 No Yes Yes No Kai 16 7.3 x 10.2 185.0 x 260.0 1 No No Yes No Kai 32 5.1 x 7.3 130.0 x 185.0 1 No No Yes No Government Letter8.0 x 10.5 203.2 x 266.7 1 No Yes Yes No 16 K 7.7 x 10.6 195.0 x 270.0 1 No No Yes No Oficio Mexico 8.5 x 13.5 215.9 x 342.9 1 No Yes (ADF)Ye s Ye s Custom, Minimum**3.6 x 7.7 92.0 x 195.0 1 No Yes Yes No Custom, Maximum**8.5 x 14.0 216.0 x 356.0 1 No Yes Yes No Notes: *Tray 1 = Multipurpose Tray 2 = Plain paper only ** With thick stock The minimum size is 3.6 x 7.25 inch (92.0 x 184.0 mm). The maximum size is 8.5 x 11.7 inch (216.0 x 297.0 mm). Downloaded From ManualsPrinter.com Manuals
Print Media3-3 Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality. Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to http://printer.konicaminolta.com. Plain Paper (Recycled Paper) Use plain paper that is „Suitable for plain paper printers and copiers, such as standard or recycled office paper. Note Do not use the media types listed below. These could cause poor print quality, media misfeeds, or damage to the machine. DO NOT use media that is „Coated with a processed surface (such as carbon paper and colored paper that has been treated) „Carbon backed „Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-press transfer paper) „Cold-water-transfer paper „Pressure sensitive „Designed specifically for inkjet printers (such as superfine paper, glossy film, and postcards) „Already been printed on by another printer, copier, or fax machine Capacity Tray 1Up to 200 sheets, depending on the media weight Tray 2Up to 500 sheets, depending on the media weight Orientation Tray 1Face up Tray 2Face up Driver Media Type Plain Paper (Recycled) Weight60 to 90 g/m² (16 to 24 lb bond) DuplexingOnly Letter/A4 plain paper can be autoduplexed. Downloaded From ManualsPrinter.com Manuals
Print Media 3-4 „Dusty „Wet (or damp) Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet media. „Layered „Adhesive „Folded, creased, curled, embossed, warped, or wrinkled „Perforated, three-hole punched, or torn „Too slick, too coarse, or too textured „Different in texture (roughness) on the front and back „Too thin or too thick „Stuck together with static electricity „Composed of foil or gilt; too luminous „Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) „Irregularly shaped (not rectangular or not cut at right angles) „Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons „Acidic „Any other media that is not approved Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1 Up to 50 sheets, depending on their thick- ness Tray 2Not supported OrientationFace up Driver Media TypeThick Stock 1 Thick Stock 2 Downloaded From ManualsPrinter.com Manuals
Print Media3-5 DO NOT use thick stock that is „Mixed with any other media in the trays (as this will cause media misfeed- ing) Envelope Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these lay- ered regions may be lost or faded. You can print continuously with envelope. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Use envelopes that are „Envelope C6 or Envelope DL (Other envelope sizes are not supported.) „Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „Approved for laser printing „Dry Weight Thick Stock 1: 91 to 163 g/m 2 (25 to 43.5 lb bond) Thick Stock 2: 164 to 209 g/m 2 (43.6 to 55.6 lb bond) DuplexingNot supported Capacity Tray 1 Up to 10 sheets, depending on their thick- ness Tray 2Not supported OrientationFace up Driver Media TypeEnvelope DuplexingNot supported Downloaded From ManualsPrinter.com Manuals
Print Media 3-6 DO NOT use envelopes that have „Sticky flaps „Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „Transparent windows „Too rough of a surface „Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „Been presealed Label A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: „The face sheet must follow the plain paper specification. „The face sheet surface must cover the entire carrier sheet, and no adhe- sive should come through on the surface. You can print continuously with label sheets. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Check your application documentation for more information on printing labels. Use label sheets that are „Recommended for laser printing DO NOT use label sheets that „Have labels that easily peel off or have parts of the label already removed „Have backing sheets that have peeled away or have exposed adhesive Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. Capacity Tray 1 Up to 50 sheets, depending on their thick- ness Tray 2Not supported OrientationFace up Driver Media TypeLabels DuplexingNot supported Downloaded From ManualsPrinter.com Manuals
Print Media3-7 „Are precut or perforated Letterhead You can print continuously with letterhead. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement. Postcard You can print continuously with postcard. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Try printing your data on a sheet of plain paper first to check placement.Capacity Tray 1Up to 50 sheets, depending on their size and thickness Tray 2Not supported OrientationFace up Driver Media TypeLetterhead DuplexingNot supported Capacity Tray 1 Up to 50 sheets, depending on their thick- ness Tray 2Not supported OrientationFace up Do not useOK to use Shiny backed paper Full-page labels (uncut) Downloaded From ManualsPrinter.com Manuals
Print Media 3-8 Use postcards that are „Approved for laser printing DO NOT use postcards that are „Coated „Designed for inkjet printers „Precut or perforated „Preprinted or multicolored „Folded or wrinkled If the postcard is warped, press on the warped area before putting it in the tray. Driver Media TypePostcard DuplexingNot supported Downloaded From ManualsPrinter.com Manuals
Printable Area3-9 Printable Area The printable area on all media sizes is up to 4.0 mm (0.157) from the edges of the media. Each media size has a specific print- able area (the maximum area on which the machine can print clearly and with- out distortion). This area is subject to both hardware limits (the physical media size and the margins required by the machine) and software constraints (the amount of memory available for the full-page frame buffer). The printable area for all media sizes is the page size minus 4.0 mm (0.157) from all edges of the media. When printing in color on legal-size media, the following limitations apply. zThe printable area is 339.6 (13.4) mm from the leading edge of the paper. (However, there is a non-printable area up to 4.0 mm (0.157) from the leading edge.) zThe bottom margin is 16.0 mm (0.63). a a a a Printable Area a=4.0 mm (0.157) Downloaded From ManualsPrinter.com Manuals