Konica Minolta magicolor 1690MF User Manual

							Configuration Menu Overview 2-34
DNS CONFIG.SettingDISABLE / ENABLE
Set whether or not the DNS server set-
ting is to be specified.
If 
ENABLE is selected, specify DNS 
server addresses (up to three 
addresses).
DHCPSettingDISABLE / ENABLE
If there is a DHCP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the DHCP server.
BOOTPSettingDISABLE / ENABLE
If there is a BOOTP server on the net-
work, specify whether the IP address 
and other network information is auto-
matically assigned by the BOOTP 
server.
ARP/PINGSettingDISABLE / ENABLE
Select whether or not the ARP/PING 
command is used when the IP address 
is assigned.
HTTPSettingDISABLE / ENABLE
Select whether or not to enable HTTP.
FTPSettingDISABLE / ENABLE
Select whether or not to enable FTP.
SMBSettingDISABLE / ENABLE
Select whether or not to enable SMB.
BONJOURSettingDISABLE / ENABLE
Select whether or not to enable Bon-
jour.
IPPSettingDISABLE / ENABLE
Select whether or not to enable IPP.
If HTTP is set to DISABLE, IPP 
cannot be set.
SLPSettingDISABLE / ENABLE
Select whether or not to enable SLP.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview2-35
SNMPSettingDISABLE / ENABLE
Select whether or not to enable SNMP.
SPEED/DUPLEXSettingAUTO / 10BASE-T FULL 
/ 
10BASE-T HALF / 
100BASE-TX FULL / 
100BASE-TX HALF
Specifies the transmission speed for the 
network and the transmission method 
for bi-directional transmission. 
E-MAIL 
SETTINGSMTPSettingDISABLE / ENABLE
Select whether to enable or disable 
e-mail transmission operations for this 
machine.
SENDER NAMESpecify the name of the E-mail sender 
(up to 20 characters) used for network 
scanning.
The default setting is “magicolor_ 
1690MF”.
E-MAIL ADDRESSSpecify the E-mail address (up to 64 
characters) of the E-mail sender used 
for network scanning.
The default setting is blank.
DEFAULT SUB-
JECTSpecify the subject (up to 20 charac-
ters) of the E-mail message used for 
network scanning.
The default setting is “From 
mc1690MF”
.
SMTP SERVER 
ADDR.
Specify the IP address or host name 
(up to 64 characters) for the SMTP 
server.
The default setting is “0.0.0.0”.
SMTP PORT NO.Setting1 to 65535 (Default: 25)
Specify the port number communicating 
with the SMTP server.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 2-36
SMTP TIMEOUTSetting30 to 300 sec (Default: 
60 sec)
Select the amount of time (in seconds) 
until the connection with the SMTP 
server times out.
TEXT INSERTSettingOFF / ON
Select whether or not the specified text 
is inserted into the E-mail message.
POP 
BEFORE 
SMTPDIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable POP 
Before SMTP.
If 
ENABLE is selected, specify the time 
(between 0 and 60 seconds). The 
default setting is 5sec.
POP3 
SERVER 
ADDR.Specify the host name or IP address 
(up to 64 characters) for the POP3 
server used for authentication with POP 
Before SMTP.
The default setting is “0.0.0.0”.
POP3 
PORT 
NO.Setting1 to 65535 (Default: 110)
Specify the port number used for com-
municating with the POP3 server.
POP3 
TIME-
OUTSetting30 to 300 sec (Default: 
30 sec)
Select the amount of time (in seconds) 
until the connection with the POP3 
server times out.
POP3 
ACCOUNTSpecify the user name (up to 63 charac-
ters) used for authentication with POP3 
server.
The default setting is blank.
POP3 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for authentication with POP3 
server.
The default setting is blank.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview2-37
SMTP 
AUTH.DIS-
ABLE/
ENABLESettingDISABLE / ENABLE
Select whether or not to enable SMTP 
authentication.
SMTP 
USER-
NAMESpecify the user name (up to 63 charac-
ters) used for SMTP authentication.
The default setting is blank.
SMTP 
PASS-
WORDSpecify the password (up to 15 charac-
ters) used for SMTP authentication.
The default setting is blank.
LDAP 
SETTINGDISABLE/ENABLESettingDISABLE / ENABLE
Select whether or not to enable the 
LDAP function.
LDAP SERVER 
ADDR.Specify the address (up to 64 charac-
ters) of the LDAP server.
The default setting is “0.0.0.0”.
LDAP PORT NO.Setting1 to 65535 (Default: 389)
Specify the port number of the LDAP 
server.
SSL SETTINGSettingDISABLE / ENABLE
Select whether or not to enable SSL.
SEARCH BASESpecify the search starting point (up to 
64 characters) in a hierarchical struc-
ture arranged on the LDAP server.
The default setting is blank.
ATTRIBUTEThe conditions for searches can be 
specified as a name or e-mail address 
(up to 32 characters).
The default setting is “cn”.
SEARCH METHODSettingBEGIN / CONTAIN / END
The specified characters can be 
searched for at the beginning, within or 
at the end.
LDAP TIMEOUTSetting5 to 300 sec (Default: 
60 sec)
Specify the maximum wait time during a 
search.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 2-38
MAX.SEARCH 
RESULTSSetting5 to 100 (Default: 100)
Specify the maximum number of desti-
nations displayed after a search.
AUTHENTICATIONSettingANONYMOUS / SIMPLE / 
DIGEST-MD5 / 
GSS-SPNEGO
Select the authentication method used 
for logging on to the LDAP server.
LDAP ACCOUNTSpecify the account (up to 64 charac-
ters) used to connect to the LDAP 
server.
The default setting is blank.
LDAP PASSWORDSpecify the password (up to 32 charac-
ters) used to connect to the LDAP 
server.
The default setting is blank.
DOMAIN NAMESpecify the domain name (up to 64 
characters) used to connect to the 
LDAP server.
The default setting is blank.
USB SETTINGSettingWindows / Mac
Select the operating system of the PC 
to which this machine is connected with 
a USB cable.
COMM. 
SETTINGTONE/PULSESettingTONE / PULSE
Select the dialing system. If this param-
eter is not correctly set to the type of 
dialing system used, faxes cannot be 
sent and received.
Select the correct setting after checking 
which type of dialing system is used by 
your telephone line.
If PTT SETTING in the USER 
SETTING
 menu is set to 
U.S.A, CANADA or NEW 
ZEALAND
, the settings cannot 
be changed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview2-39
LINE MONITORSettingOFF / LOW / HIGH
Select the volume of the monitoring 
sound of the transmission signal.
PSTN/PBXSettingPSTN / PBX
Select whether the connected tele-
phone wiring is a public switched tele-
phone network (PSTN) or a private 
branch exchange (PBX).
For a PBX system, the prefix number 
(outside line access number or exten-
sion number) can be specified.
USER 
SETTINGPTT SETTINGSettingARGENTINA / AUSTRA-
LIA
 / AUSTRIA / BEL-
GIUM
 / BRAZIL / 
CANADA / CHINA / 
CZECH / DENMARK / 
EUROPE / FINLAND / 
FRANCE / GERMANY / 
GREECE / HONG KONG / 
HUNGARY / IRELAND / 
ISRAEL / ITALY / 
JAPAN / KOREA / 
MALAYSIA / MEXICO / 
THE NETHERLANDS / 
NEW ZEALAND / NORWAY 
/ 
PHILIPPINES / 
POLAND / PORTUGAL / 
RUSSIA / SAUDI ARA-
BIA
 / SINGAPORE / 
SLOVAKIA / SOUTH 
AFRICA
 / SPAIN / SWE-
DEN
 / SWITZERLAND / 
TAIWAN / TURKEY / 
U.S.A / UNITED KING-
DOM
 / VIETNAM
Select the country where this machine 
is installed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 2-40
DATE&TIMESettingTIME: 00:00-23:59
(Default: 
00:00)
DATE: ’00/01/01-’99/12/31
ZONE: 
GMT+12:00-GMT-12:00 (in 
30-minute intervals)
(Default: 
GMT+00:00)
Use the keypad to specify the current 
date, time and time zone.
DATE FORMATSettingMM/DD/YY, DD/MM/YY, 
YY/MM/DD
Select the display format for reports and 
lists.
PRESET ZOOMSettingINCH / METRIC
Select the measurement units for the 
preset zoom ratios.
The default setting is 
INCH for USA 
and Canada, and 
METRIC for other 
countries.
USER FAX NUM-
BEREnter your fax number. A maximum of 
20 characters (consisting of numbers, 
spaces, + and -) can be entered. The 
specified number is printed in the 
header of outgoing faxes. The default 
setting is blank.
USER NAMEEnter your name. A maximum of 32 
characters can be entered. The speci-
fied name is printed in the header of 
outgoing faxes. The default setting is 
blank.
AUTO 
REDIALNUMBER OF 
REDIALSetting1 to 10 (Default: depends 
on 
PTT SETTING)
Specify the number of times a redial is 
attempted if there is no answer, for 
example, when the line is busy.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview2-41
INTERVALSetting2 to 99 min (Default: 
depends on 
PTT SET-
TING
)
Specify the interval between redial 
attempts.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 2-42
COPY SETTING Menu
*1 This appears only when the duplex option has been installed.
Manufacturer’s default settings appear in bold.
COPY SETTING PAPER PRIORITY
QUALITY PRIORITY
DENSITY PRIORITY
DENSITY LEVEL AUTO
MANUAL
OUTPUT PRIORITY
DUPLEX COPY
*1
PAPER PRIOR-
ITYSettingTRAY1 / TRAY2
Specify the paper tray that is normally used.
If an optional lower feeder unit is not installed, 
this setting is not available.
QUALITY PRI-
ORITYSettingMIX , TEXT , PHOTO , FINE/MIX , 
FINE/TEXT , FINE/PHOTO
Select the type of document being copied.
DENSITY PRI-
ORITYSettingAUTO / MANUAL
Select the density that is normally used.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview2-43
DEN-
SITY 
LEVELAUTOSetting
(LIGHT) (DARK)
Adjust the density of the background color.
MANUALSetting
(LIGHT) (DARK)
Specify the default copy density.
OUTPUT PRIOR-
ITYSettingNON-SORT / SORT
Select whether or not to sort copies by sets.
DUPLEX COPYSettingOFF / LONG EDGE / SHORT EDGE
Select the default setting for duplex (double-sided) 
copying.
If 
OFF is selected, duplex (double-sided) copying is 
not performed as a default.
If 
LONG EDGE is selected, duplex (double-sided) 
copying is performed as a default, and the pages are 
fed out with the binding along the long side.
If 
SHORT EDGE is selected, duplex (double-sided) 
copying is performed as a default, and the pages are 
fed out with the binding along the short side.
Downloaded From ManualsPrinter.com Manuals