Konica Minolta magicolor 1690MF User Manual

Making Basic Copies 5-2
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and 
the functions that are frequently used when making copies, such as specify-
ing the zoom ratio and the copy density.
Before making copies, check that the Copy key is lit up in green. If the 
key is not lit up in green, press the Copy key to enter Copy mode.
The default paper size setting can be changed with TRAY1 PAPER 
SETUP
 in the UTILITY menu. For details, refer to “TRAY1 PAPER...

Making Basic Copies5-3
2Press the Copy key.
3Specify the desired copy settings.
For details on specifying the copy mode and the copy density, refer 
to “Specifying the Copy Quality Setting” on page 5-3.
For details on specifying the zoom ratio, refer to “Specifying the 
Zoom Ratio” on page 5-4.
For details on selecting the media tray, refer to “Selecting the 
Media Tray” on page 5-5.
For details on setting 2in1 copying, refer to “Setting 2in1 Copying” 
on page 5-6.
For details on ID card copying, repeat...

Making Basic Copies 5-4
Specifying the Copy Density
1In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2Press the + or , key to select DENSITY, and then press the Select key.
3Press the * or ) key to select the desired copy density, and then press 
the Select key.
As the indicator is moved to right, the density becomes darker.
The main screen (Copy mode) appears again.
If TEXT or FINE/TEXT is selected as the copy mode,...

Making Basic Copies5-5
3Use the keypad to type in the desired zoom ratio, or press the + or , key 
to specify the zoom ratio, and then press the Select key.
The main screen (Copy mode) appears again.
Each press of the + or , key changes the zoom ratio by 1%.
A setting between 50% and 200% can be specified.
Selecting the Media Tray
If an optional lower feeder unit is not installed, this setting is not avail-
able.
1In the main screen (Copy mode), press the + or , key to select the cur-
rent media tray...

Making Advanced Copies 5-6
Making Advanced Copies
This section contains descriptions on setting 2in1 copying, ID card copying, 
repeat copying, poster copying, duplex (double-sided) copying and collated 
(Sort) copying.
ID card copying, repeat copying or poster copying cannot be set at the 
same time that 2in1 copying, duplex (double-sided) copying or col-
lated (Sort) copying is set.
Setting 2in1 Copying
If 2in1 copying is set, two document pages can be copied together onto a sin-
gle page.
2in1...

Making Advanced Copies5-7
4To print color copies, press the Start-Color key. To print monochrome 
copies, press the Start-B&W key.
Scanning of the document begins.
In order to perform duplex (double-sided) copying or collated (Sort) 
copying with 2in1 copying, specify the necessary settings before 
performing step 4. For details, refer to “Setting Duplex (Dou-
ble-Sided) Copying” on page 5-11 and “Setting Collated (Sort) 
Copying” on page 5-13.
5When NEXT PAGE? appears in the message window, place the...

Making Advanced Copies 5-8
ID Card Copying
With ID card copying, the back and front of a document, such as a certificate, 
are copied at full size on a single sheet of paper.
The paper sizes that are available for ID card copying are A4, Let-
ter and Legal.
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 3-28.
2In the main screen (Copy mode), press the + or , key to select the cur-...

Making Advanced Copies5-9
To print only the front sides that were scanned first, press the 
Start-Color key or the Start-B&W key in step 5.
Repeat Copying
With repeat copying, small documents, such as memos, are tiled and printed 
on a single page.
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 3-28.
2In the main screen (Copy mode), press the + or , key to select the cur-
rent copy...

Making Advanced Copies 5-10
Poster Copying
With poster copying, the length and width of the scanned document are each 
enlarged 200%, and printed on four pages.
If the scanned image does not fit on the size of paper that is used, 
there may be margins on the sides of the image or the image may not 
fit in the paper.
1Position the document on the original glass.
For details on positioning the document on the original glass, refer 
to “Placing a document on the original glass” on page 3-28.
2In the main...

Making Advanced Copies5-11 Setting Duplex (Double-Sided) Copying
In order to perform double-sided copying, the duplex option must be installed 
on the machine.
For details on installing the duplex option, refer to “Duplex Option” on 
page 10-7.
Duplex (Double-Sided) Copying From the ADF
With duplex (double-sided) copying, two single-sided document pages can be 
scanned with the ADF and printed onto a single sheet of paper.
1In the main screen (Copy mode), press the + or , key to select the cur-
rent...