Konica Minolta bizhub C552 User Manual

bizhub C652/C652DS/C552/C552DS/C4527-53
7.10 Security Settings7
Copy Guard No
Password Copy No Factory default
Downloaded From ManualsPrinter.com Manuals 

bizhub C652/C652DS/C552/C552DS/C4527-54
7.10 Security Settings7
7.10.5 Enhanced Security Mode
The enhanced security mode cannot be enabled when any of the current functional settings conflict with the 
enhanced security mode.
When the enhanced security mode is enabled, the settings required for the mode or the settings that have 
been forcibly switched when entering the mode cannot be changed.
Required settings
To enable the enhanced security mode, the following settings must have been configured....

bizhub C652/C652DS/C552/C552DS/C4527-55
7.10 Security Settings7
If [Enhanced Security settings] is enabled, various security functions are configured to allow you to ensure 
the higher-level security of data management. For details, contact your service representative. To enable the 
enhanced security mode, the following settings must first be configured. Different screens appear depending 
on the current settings.
7.10.6 HDD Settings
This setting is for the hard disk operations. For details, refer to...

bizhub C652/C652DS/C552/C552DS/C4527-56
7.10 Security Settings7
7.10.7 Function Management Settings
Configure the settings for the network functions that are difficult to count.
%Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Function 
Management Settings] .
Settings
Network Function Usage 
SettingsON Configure the settings for the network manage-
ment that are difficult to count when managing 
operations.
OFF The following functions cannot be used if Net-
work...

bizhub C652/C652DS/C552/C552DS/C4527-57
7.10 Security Settings7
7.10.8 Stamp Settings
Manage the stamp.
%Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings].
dReference
To configure copy protect and stamp repeat settings:
Press [Application] ö [Stamp/Composition].
7.10.9 Driver Password Encryption Setting
This setting is for the print operations. For details, refer to the Users Guide [Print Operations]. Settings
Stamp Settings Apply Stamps Configure whether...

bizhub C652/C652DS/C552/C552DS/C4527-58
7.11 License Settings7
7.11 License Settings
Enable the functions of an optional component i-Option LK-101, LK-102, LK-103 or LK-105. For details on 
the enabling procedure, refer to the Quick Guide [Copy/Print/Fax/Scan/Box Operations].
0An optional component i-Option LK-101, LK-102, LK-103 or LK-105 must be purchased. For details, 
contact your service representative.
%Press the [Utility/Counter] key ö [Administrator Settings] ö [License Settings] .
Reference...

bizhub C652/C652DS/C552/C552DS/C4527-59
7.12 OpenAPI Authentication Management Settings7
7.12 OpenAPI Authentication Management Settings
Configure settings to prevent our deprecated OpenAPI connection application from being registered in this 
machine. For details, contact your service representative.
Downloaded From ManualsPrinter.com Manuals 

8Maintenance
Downloaded From ManualsPrinter.com Manuals 

bizhub C652/C652DS/C552/C552DS/C4528-2
8.1 Paper8
8 Maintenance
8.1 Paper
8.1.1 Checking the paper
Replenishment message
If a tray has run out of paper during printing, load paper or change the paper tray. Load paper in the paper 
tray that is highlighted in color.
Precautions regarding the use of paper
Do not use the following types of paper. Not observing these precautions may lead to reduced print quality, 
a paper jam or a damage to the machine.
-OHP transparencies that have already been fed through...

bizhub C652/C652DS/C552/C552DS/C4528-3
8.1 Paper8
8.1.2 Loading paper
This section describes how to load paper into each tray.
If printing stops due to the tray being empty, load paper into the tray. Printing restarts automatically.
For the types of paper to be used, refer to page 12-2.
Loading paper into trays 1 and 2
The same procedures can be used to load paper into trays 1 and 2.
The following procedure describes how to load paper into tray 1.
0When Auto Detect is selected on the Paper tab, the size...