Konica Minolta bizhub C552 User Manual

bizhub C652/C652DS/C552/C552DS/C452 10-16
10.1 Using an authentication unit (biometric type)10
12Click the [Write].
%Data Administrator provides the batch copy function that batch-configures the registered user data 
in multiple machines with the authentication unit enabled.
The registered user data is configured in this machine.
13Click the [OK].
14Disconnect the authentication unit from the USB port of the computer.
15Turn the main power switch of this machine off, connect the authentication unit to...

bizhub C652/C652DS/C552/C552DS/C452 10-17
10.1 Using an authentication unit (biometric type)10
10.1.3 Logging in to this machine
This section explains how to log in to this machine with the finger vein pattern authentication.
-To use authentication unit (biometric type), register the finger vein pattern in advance.
-If authentication fails frequently, finger vein pattern may not be registered correctly. Register the finger 
vein pattern again.
-Authentication is carried out when you simply place your...

bizhub C652/C652DS/C552/C552DS/C452 10-18
10.1 Using an authentication unit (biometric type)10
When 1-to-1 authentication has been specified
1Select [User Name], and enter the user name.
2Place your finger on the authentication unit.
The basic settings screen appears.Authentication unit (biometric type) AU-101Authentication unit (biometric type) AU-102
Downloaded From ManualsPrinter.com Manuals 

11Authentication unit (IC card 
type)
Downloaded From ManualsPrinter.com Manuals 

bizhub C652/C652DS/C552/C552DS/C45211-2
11.1 Using authentication unit (IC card type)11
11 Authentication unit (IC card type)
This chapter describes the authentication unit (IC card type).
1. Authentication unit (IC card type) AU-201
11.1 Using authentication unit (IC card type)
The authentication unit (IC card type) is an IC card authentication  system that reads the IC card to perform 
personal authentication. Using this system, you can perform authentication with an IC card to log in to this 
machine...

bizhub C652/C652DS/C552/C552DS/C45211-3
11.1 Using authentication unit (IC card type)11
2Set [User Authentication] to ON (MFP), and then press [OK].
3Press [Yes], and then [OK].
4Press [8 Authentication Device Settings].
5Press [1 General Settings].
6Press [Card Authentication].
7Configure IC Card Type and Operation Settings.
%In IC Card Type, specify the required IC card type.
%For Operation Settings, specify how to log in to this machine after registration.
Card Authentication: Allows the user to log...

bizhub C652/C652DS/C552/C552DS/C45211-4
11.1 Using authentication unit (IC card type)11
8Press [OK] twice.
9Press [2 Logoff Settings].
10Specify whether to log out the user when scanning the original has finished after the user logged in with 
the authentication unit.
11Press [OK].
12Press [Close] twice.
11.1.2 Registering a user
The following two methods can be used to register a user.
-Connect the authentication unit to this machine, and directly register the target user in this machine
-Connect the...

bizhub C652/C652DS/C552/C552DS/C45211-5
11.1 Using authentication unit (IC card type)11
4Press [Register Auth. Info.].
5Press [Edit].
6Place the IC card on the authentication unit, and press [OK].
7When message [Registration complete] appears, press [Close] twice.
8Enter the user name and password.
9Configure function permission settings as required.
10Press [OK].
11Press [Close].
Downloaded From ManualsPrinter.com Manuals 

bizhub C652/C652DS/C552/C552DS/C45211-6
11.1 Using authentication unit (IC card type)11
Registering a user using Data Administrator
To use Data Administrator, configure this machine, and set up Data Administrator. For setup, install the IC 
Card Driver (USB-Driver) of the authentication unit, and then install Data Administrator IC Card Plugin.
NOTICE
Before setup, install Data Administrator V4.0 or later in your computer. For the Data Administrator operating 
environment and installation procedure, refer...

bizhub C652/C652DS/C552/C552DS/C45211-7
11.1 Using authentication unit (IC card type)11
Setup
1Turn the main power of this machine off, and disconnect the authentication unit from this machine.
2Install IC Card Driver (USB-Driver).
Connect the authentication unit to the USB port of your computer.
The Found New Hardware dialog box appears.
3Select Locate and install driver software (recommended).
4Insert the application CD-ROM provided with the authentication unit into the CD-ROM drive of the 
computer....