Konica Minolta bizhub C451 User Manual

Sending a user box document5
C4515-49
7Touch [OK], and then touch [OK] in the next screen that appears.
8Touch [Close].
Send & Print (Application)
Settings can be specified to print a docum e n t  w h e n  i t  i s  s c a n n e d .  I n  a d d i t i o n ,  
various settings can be specified when printing.
Settings can be specified for the following.
1Touch [Application] in a screen for selecting a destination.
2Touch [Send & Print].
ParameterDescription
Copies Use the keypad to type in the number of...

Sending a user box document5
C4515-50
3To print a document while sending it, touch [Yes], and then specify the 
desired settings.
4To select the staple position, touch [Corner] or [2 Position], and then 
touch [Position Setting].
5Touch the button for the desired position, and then touch [OK].
Downloaded From ManualsPrinter.com Manuals 

Sending a user box document5
C4515-51
6Touch [OK].
7Touch [Close].
Downloaded From ManualsPrinter.com Manuals 

Sending a user box document5
C4515-52
5.4 Bind TX
Available combined sending parameters
Multiple documents can be sent together. Up to 10 documents can be se-
lected to be sent together.
In the screen for selecting a destination, touch [File Type], [Communication 
Settings] or [Application] to specify detailed settings for sending. Settings 
can be specified for the following.
File Type
Communication Settings
Application
To perform a combined transmission
1From the Use Document screen, select the...

Sending a user box document5
C4515-53
2Under “Action”, touch [Bind TX].
3Specify the combination order.
– Select the two documents whose order is to be switched.
– The documents are combined and transmitted in the order speci-
fied here.
Downloaded From ManualsPrinter.com Manuals 

Sending a user box document5
C4515-54
4Touch [OK].
5Specify the destination and transmission settings.
6If desired, touch [Preview], then [Details] on the left side of the screen 
to check a preview image.
– For details on the Preview screen, refer to “Preview - Detail (Send/
Bind TX)” on page 2-79.
7Touch [Start], or press the [Start] key in the control panel.
!
Detail 
For details on specifying the destination and transmission settings, refer 
to the descriptions starting with page 5-8.
Downloaded From...

Sending a user box document5
C4515-55
2
Note 
Transmission may not be possible if limitations have been placed on the 
document name according to the destination server conditions. Since the 
document name becomes the file name during transmission, consult 
your network administrator when specifying the document name.
Downloaded From ManualsPrinter.com Manuals 

Sending a user box document5
C4515-56
5.5 Checking settings before sending
Touch [Check Job] in the sub display area to display the list of destinations. 
In this area, the selected settings can be checked. To change a destination, 
select it in this area.
Settings can be checked and changed with the following.
1Touch [Check Job] in the sub display area.
The Broadcast Destinations list appears.
2Select the desired destination from the list of registered destinations.
ItemDescription
Destination  Settings...

Sending a user box document5
C4515-57
3Touch [Check Job Settings].
The Check Job Detailed Settings screen appears.
4Touch the button for the setting to be changed, and then check or 
change the setting.
– If a setting is changed, the changed destination moves to the end 
of the list.
5After checking the settings, touch [Close].
Deleting unnecessary destinations
The selected destination can be deleted.
1Touch [Check Job] in the sub display area.
The Broadcast Destinations list appears.
Downloaded From...

Sending a user box document5
C4515-58
2Select the destination to be deleted from the list of registered destina-
tions.
3Touch [Delete].
The destination is deleted.
Downloaded From ManualsPrinter.com Manuals